Do-it-yourself bicycle with a chainsaw motor - assembling a moped, go-kart, scooter and ATV

Chainsaw vehicles – what are the pros and cons?

When independently assembling 2- or 4-wheeled vehicles based on a household chainsaw, the manufacturer receives several quite important advantages:

• Manufacturing the unit makes it possible to save money. Of course, during assembly you will have to spend money on individual parts or entire working units. Nevertheless, these expenses are incomparable with the purchase of branded equipment;
• assembling vehicles with your own hands will allow you to obtain a reliable and fairly passable unit that does not require frequent special maintenance or complex repairs;
• When making vehicles, the designer can create any of the selected modifications: go-kart, ATV, moped or scooter from a chainsaw.

The only drawback is the need to have skills in operating an angle grinder, drill, welding machine and other types of garage equipment. Otherwise, you won’t be able to assemble a moped or other type of equipment.

Chainsaw moped

At first glance, a moped and a saw are absolutely incompatible things that cannot interact in any way. But this is wrong, and numerous craftsmen have proven that making a moped from a chainsaw is quite possible. But there is little to be done; this unit also drives and transports its owner. The speed, of course, is not very fast, but it’s still better than walking. You can use a bicycle as the basis for the design or do everything completely yourself. The bike motor amazes with its endurance, but this is what everyone expects from time-tested saws.

The older generation is familiar with self-propelled structures in the form of a bicycle with a motor. It is difficult to classify this equipment as mopeds, but they no longer fall into the category of bicycles. A kind of “middle link”. A significant advantage of such a unit is low fuel consumption and the ability to drive without a license. You can’t ride it on public roads, but you can drive along rural streets and alleys.

What engines are suitable for assembly?

To answer this question, you need to select in advance the type of equipment that the manufacturer wants to assemble.

There may be several options:

• scooter is a small-sized homemade product. The heaviest part is the niche for the user’s feet. The remaining elements can be made of light steel or aluminum. Power units with a capacity of about 3 - 4.5 liters are best suited for assembling a scooter based on a chainsaw. With.;
• Karting is a small device designed for high-speed movement on a flat asphalt or concrete surface. The estimated engine power for assembling a go-kart should be approximately 4 - 5 hp. With.;
• A moped is a medium-sized vehicle based on a strong, stable frame. For the manufacture of a moped, motors from chainsaws with a power of 5 - 6 liters are suitable. With.;
• An ATV is a relatively large vehicle that is assembled from fairly strong and heavy parts. To assemble an ATV, a chainsaw with a rated power of at least 6 liters is suitable. With.

Regardless of the equipment that the manufacturer wants to obtain, the homemade engine must be in fully working order. It is best to clean or completely replace all filters in its design in advance, as well as make carburetor and ignition adjustments.

How to make a scooter from a chainsaw?

To independently manufacture a scooter based on a utility saw, the designer will need to prepare 3-mm steel plates, as well as metal pipes and corners. The engine of a gas powered tool must be fully operational and serviced. Assembly order:

1. First you need to make a supporting frame. Profile pipes and a steel plate pre-treated against rust are well suited for its assembly. Scooter wheels from a pre-disassembled chainsaw can be taken from an old garden cart;
2. To transmit the torque generated by the power unit, you will need a chain and a sprocket. To install the second part of the chain, you need to machine a small metal tensioner;
3. The driver of the scooter will pour the fuel mixture into a remote tank, which must be installed a few centimeters above the engine;
4. The homemade brake system will be of the disc type. To assemble it, parts from an old moped are suitable.

As a result of the work done, the designer will receive a unit capable of reaching speeds of about 30 - 40 km/h.

Chainsaw kart - assembly features

To assemble this homemade product, you will need to remove the handles, fuel tank, cutting parts, gear rack and built-in cable connecting the gas handle and the engine from the chainsaw used on the farm.

In the future, the operator will have to:

1. Remake the standard chainsaw sprocket. To do this, it is necessary to carefully grind off all its teeth to arbitrary sizes, since the outer diameter of the part does not play a big role. A pre-ground Minsk star will need to be welded to the resulting workpiece;
2. Organize a place to mount the power unit on the subframe. To do this, it is necessary to drill 2 small holes in the cooling casing, the diameter of each of which should be approximately 8 mm. They need to be drilled into standard holes, each with an initial diameter of 6 mm;
3. Assemble a strong subframe that is as vibration-resistant as possible. To construct it, a 3-mm sheet of steel is suitable, to which you need to weld 2 corners with dimensions of 35 × 35 mm. In the corners you need to pre-drill holes with an exact diameter of 8.5 mm - they will be needed to permanently fix the power unit from the chainsaw. In the opposite part of the steel plate, it is necessary to vertically weld a metal corner with dimensions of 35x35 mm - it will be necessary for installing the gearbox used. In addition, you will need to install a 10×1.5 mm M nut on the plate to tension the chain;
4. To install the gearbox, you will need to turn it over to the other side;
5. Weld the guides to the back of the steel plate. They can be made in advance from halves of metal pipes measuring 30x2 mm;
6. Install a steel plate with parts welded to it on the chassis taken from an old AKU 89 go-kart;
7. Equip a homemade chainsaw with a seat, steering wheel and brake system. If during the assembly process it turns out that the muffler from the internal combustion engine is directed towards the driver, then it will need to be moved to the side, or extended using a piece of metal pipe.

The finished homemade product will be able to accelerate to 60–80 km/h, carrying one adult passenger on board.

What can be made from a chainsaw

All homemade products can be divided into 2 groups:

• the simplest devices (grinder, ice screw, pump, winch, walk-behind tractor, outboard motor, bicycle, moped);
• more complex mechanisms and objects (sawmill, snow blower, snowmobile, snowmobile, power plant, helicopter, solid forged knife).

To manufacture all of the above devices, you can use various brands of chainsaws. When choosing them, you should take into account the required power for normal operation of the modification. Most often, the following brands of chainsaws are used for the manufacture of various devices: Druzhba, Shtil, Ural.

A chainsaw motor can also be installed on a homemade scooter. The engine needs to be prepared: the saw bar and chain must be removed. Other constituent parts remain untouched. The preserved motor housing makes it easier to attach it to the scooter platform.

Chainsaw crafts can be very different. They are assistants in the household and help maintain the budget. However, to create a safe device you need to have certain skills and knowledge. Therefore, it is important that homemade products are made by truly skilled craftsmen.

• How to Start a Stihl 180 Chainsaw
• How to Cut a Countertop at Home
• How to Clean the Carburetor of a Stihl 180 Chainsaw
• Which Circular Saw is Best for the Home
• Adjusting the Carburetor of a Stihl 250 Chainsaw with Your Own Hands

Useful homemade chainsaws, what options?

Craftsmen do not always use a chainsaw for its intended purpose; it usually serves as a massive drive in various mechanisms. The ingenuity of our craftsmen has given rise to countless and very different homemade chainsaws, surprising with their originality.

The advantage of a chainsaw as a drive is its compactness, low weight and high power. How to assemble a go-kart with your own, how to make one for an engine using a chainsaw? Do-it-yourself chainsaw crafts: how to make them. Which can be made from a chainsaw. Since a chainsaw has a snowmobile made from a chainsaw. Any craftsman who is capable of turning a part, can do metalwork, use a grinder and a welding machine, can make designs worthy of attention based on a chainsaw.

In order for a device driven by a chainsaw to work as it should, accuracy in the dimensions of parts and vigilance during assembly are needed. The advantage of a chainsaw is how many have managed to turn a chainsaw into a generator. walk-behind tractor from a Ural chainsaw 10 ideas on how to make a walk-behind tractor with your own hands. duration: 14:47. So, knowledge of the basics of drawing and designing devices will be needed in this matter.

What homemade chainsaw products have already been invented?

The first use of a chainsaw, according to the beliefs of many developers, is to cut logs into beams with its help. But, if you hold the chainsaw suspended manually, the accuracy of the cut suffers, especially when the beam is four to six meters long. To prevent the cut from moving away from the suitable strip to the side, we decided to aggressively secure the chainsaw in the frame, which moves along the guides.

In such a sawmill, the log lies motionless, and the carriage with the chainsaw is placed at a suitable height, depending on the suitable thickness of the timber, and is fixed with 4 screws.

Thanks to the precise movement of the frame, an even and careful cut comes out. homemade products and life hacks with your own hands from a chainsaw, how to make a cultivator from. You can cut boards in the same way, but due to the large thickness of the cutting chain you will end up with a lot of waste.

Chainsaw-winter transport

They managed to use a chainsaw as an engine for a homemade snowmobile. How to repair a chainsaw starter with your own, how to make a wardrobe hanger from pipes, etc. Here the design is much more complex than a sawmill. In this case, in addition to the production of the snowmobile frame, it will be necessary to make a suspension with shock absorbers, and connect the gas and clutch controls to the steering wheel.

Apart from this, you will need to find the drawings (or design it yourself) according to which the snowmobile track will be made, and think about the transmission of torque from the chainsaw to the caterpillar. How to make a moped from a bicycle and a generator from a chainsaw into your own. Such a snowmobile is equipped with a centrifugal clutch with a chain and a poly-V-belt (after all, the chainsaw does not have its own gearbox). Video - how to make a winch with your own hands, you can build a winch from a chainsaw with your own. In order to increase traction on the drive shaft of the tracks, a gear is installed with a diameter larger than the drive sprocket of a chainsaw (the so-called “traction gear”).

For the control mechanism, they usually take the steering wheel from a scooter and a bike and remake it without any problems so that it turns the skis of the snowmobile. Such transport requires an engine with a power of more than 5 horsepower, so if you are making a snowmobile, then use a Ural chainsaw.

If we consider transport for the winter, then the design of a snowmobile is even simpler. Step-by-step instructions on how to make a homemade boat motor from a chainsaw with your own hands with photos and videos, selection of necessary components. In them, a large screw is attached directly to the shaft of the chainsaw mounted at the back, which is the propeller. How to make a homemade snow blower with your own hands: from a chainsaw, on a walk-behind tractor, with an electric motor and other options for the garden. How to make a drill from how to make a drill from a chainsaw will make the motor drill heavier. True, the low power of the chainsaw limits the maneuverability of such sleds on ice on a river or a compacted road. How to make a generator from a chainsaw at home. How to assemble a walk-behind tractor from a chainsaw: from the “how to make (cultivator)” section. For racing on snowy fields, you need an engine with at least 12 horsepower. Auger make an ice screw from a new type of chainsaw, such as they produce. About how to make a rotary mower from when starting a chainsaw. The same restrictions do not allow making homemade products from a chainsaw to be completed with a backpack helicopter. Perhaps if you use two motors and the master manages to force them to work in harmony.

Chainsaw map device

Chainsaw kart

.

Chainsaw cards friendship.

Children's kart from a chainsaw

DIY friendship.

How to make a moped from a bicycle and a chainsaw?

To assemble homemade mopeds from a chainsaw, manufacturers will need:

• wheels, a fully assembled brake system, shock absorbers and an exhaust pipe - this must be removed from the old moped;
• a welded frame from an old, unused bicycle;
• drill, grinder, welding machine and other equipment.

The algorithm for further work on assembling the moped should be as follows:

1. If the designer could not find a ready-made frame from an old bicycle, then you need to make it yourself. To do this, you need to weld metal pipes together to form a triangle. To the finished frame for the moped, you will need to additionally weld 2 more pipes, which will give the structure rigidity and stability. Next, you need to attach a soft seat and steering wheel to the frame;
2. At the next stage, the designer must organize the transfer of the force created by the engine from the chainsaw to the moped’s organs of movement. To do this, you must first remove the front sprocket and pedals from the finished bicycle frame. After this, sprockets will need to be installed on the shaft of the engine used and the side of the rear wheel of the moped;
3. Then the rear wheel must be installed on the support frame and the two sprockets connected using a chain.

To ensure stable transmission of continuous force from the motor to the installed drive wheel on a moped from a chainsaw, it is necessary to mount a gearbox pre-filled with new transmission oil.

Communities › This is interesting to know. › Blog › Friday chainsaw crafts!

Light weight and solid power combined with compact dimensions allow this “lumberjack’s dream” to be combined with an ice auger and a bicycle, a sawmill and a winch.

Anyone who can confidently work with a welding machine, an angle grinder, and, if necessary, can even use a lathe, can make interesting homemade products from a chainsaw with their own hands.

In this case, knowledge of the basics of design and drawing will be very useful, since the accuracy of all dimensions and quality of assembly are the main conditions for the normal functioning of a unit driven by a chainsaw.

Without going into technical details, we will consider the most interesting designs using it.

Options for homemade chainsaws

The first thing that comes to mind when you think about what can be done with a chainsaw is its use as a sawmill. Many developers had to split logs onto beams with this tool.

In this case, the log lies motionless and is neatly sawn along its entire length without wobbling or oblique seams. If you equip such a mobile carriage with four lifting screws, you can accurately set the thickness of the sawn timber.

A lightweight homemade snowmobile made from a chainsaw is more complex in design than a sawmill, since here you need to move the gas and clutch to the steering wheel, and also take care of the shock-absorbing suspension of the supporting frame.

How to install a chainsaw engine on a bicycle?

After assembling the frame and organizing the transmission of torque, the moped will need to be equipped with an engine. To install it, it is best to prepare a separate metal platform, which will be welded to the support frame above the rear wheel. You will need to drill several holes in the platform to mount the power unit. This will allow the operator to unscrew the screws and remove the internal combustion engine from the moped for further installation on the chainsaw.

After installing the power unit, it will need to be connected to the transmission elements of the generated torque. To do this, you will need to connect a metal throttle valve and a standard fully functional clutch for the manufactured moped to the lever of the built-in ignition system. In this case, the tension force of the cables used must be calculated so that when starting, the engine instantly turns on and begins to spin the drive wheel.

Three-wheeled bike with a chainsaw engine

Dear visitors to the site “Visiting Samodelkin”, from the material presented by the author you will learn how you can independently make a three-wheeled mini-bike with an engine from a Ural chainsaw with a minimum of funds, so let’s go)

This three-wheeled mini-bike is the brainchild of one very good man and his name is Gainetdin Bulatov from the city of Pyt-Yakh, or simply Gennady. The author made the three-wheeler especially for his beloved grandchildren; Gennady has three of them)

The heart of the mini-bike is the engine from the Ural chainsaw; according to the author, it was lying abandoned in the garage because he uses modern saws. This engine is well suited for a mini-moped and has enough power to push a child around.

The frame is welded from a half-inch water pipe, the wheels are from a garden wheelbarrow, the axles are from the same, the small drive sprocket is from a D-6, the large driven sprocket is from a bicycle, the chain is also a bicycle chain. The throttle and brake cables are mounted on the bicycle handlebars. The rear axle is mounted through bearings at three points and is driven by transmitting torque from the engine through a chain drive from a small to a large sprocket.

The wings are also homemade and made of metal from an iron barrel. There is a small glove compartment under the seat where you can store and transport wrenches and a chainsaw starter.

So, let's look at what exactly the author needed to assemble a three-wheeled mini-bike?

1. engine from a Ural chainsaw 2. wheels from a garden wheelbarrow 3. bearings 3 pcs. 4. sprocket from D-6 5. bicycle chain 6. half-inch pipe 7. cable 2 pcs. 8. bicycle handlebar 9. rear axle with 2 wheels 10. paint 11. large bicycle sprocket 12. foam rubber 13. leatherette 14. plywood (for seat) 15. bolts, nuts, washers, engravers

1. welding machine 2. grinder (angle grinder) 3. drill 4. set of wrenches 5. screwdriver 6. tape measure 7. spray gun 8. marker 9. hammer 10. corner

Step-by-step process of assembling a mini-bike with an engine from a Ural chainsaw with your own hands.

As mentioned above, Gainetdin created this mini-bike for his grandchildren in order to instill in them a love of motorcycles from a young age. A three-wheeled moped is very convenient in terms of stability, just like a bicycle in principle, and the child quickly gets used to riding such a bike. It’s clear that children love their grandfather very much for his invention and enjoy riding in the yard of the house (under the supervision of adults, of course)

To start the assembly, the author purchased 3 wheels from a garden wheelbarrow at a reasonable price.

The creator of the three-wheeled mini-bike is Gainetdin Bulatov from the city of Pyt-Yakh.

As you can see, in order to make your children and grandchildren happy, you don’t have to buy expensive imported toys that he will play with, break and throw away, but such a bike will give happiness and joy to a little boy and respect among his peers and not only) Well done Gainetdin. Skillful fingers

That's all. Thank you all very much for your attention! Come visit often and don't miss out on new items in the world of homemade products!

How to assemble an ATV from a chainsaw with your own hands?

An ATV is the largest homemade product of all types of equipment that can be assembled from a chainsaw. In this regard, the manufacture of this vehicle will take the designer more time, effort and parts. The order of assembling the ATV should be as follows:

1. The operator must first make a suspension for the front of the unit. For this purpose, pipes, several homemade levers, as well as steering knuckles, previously removed from a non-working children's ATV, are suitable;
2. Next, you will need to install the rear axle, which is pre-equipped with a star. It must be secured to housing bearings;
3. After this, you need to attach the engine from the disassembled chainsaw to the frame, as well as the gearbox, previously removed from the old moped;
4. To move the assembled ATV from a chainsaw, 4 wheels taken from a walk-behind tractor are suitable;
5. In the end, all that remains is to install the steering wheel and seat on the homemade product.

The finished ATV can be primed and painted to protect it from rust.