Bulgarian women INTERSKOL

Technical parameters of angle grinders Interskol

The main consumable for an angle grinder is the disc. She uses it to polish, cut, and clean. When choosing a disk, you need to take into account that the “useful area” is four times smaller than the diameter; only the outer part is used for cutting. There are five different sizes available:

• The smallest are 115 mm. Not recommended for cutting due to the shallow cutting depth (25 mm). But the 115 mm disc is well suited for grinding work and cutting small objects. In stores you can find grinders with a disc diameter of 100 mm; their main area of ​​application is polishing and grinding.
• Discs with a diameter of 125 mm, the most common size for household grinders. Cutting depth - 40 mm. Used for cutting any materials.
• Discs with a diameter of 150 mm are used for cutting brick, concrete and metal pipes of small diameters.
• 180 mm discs are useful when building a house or renovating an apartment.
• Professional 230 mm discs are not used in everyday life. Cutting depth - 70 mm. The larger the disc, the greater the weight of the tool.

Power ensures constant operation of the angle grinder under load. The indicators of household tools are in the range of 500–2500 W. The power does not depend on the diameter of the disk used. For household purposes, 600–900 W is enough. If long-term operation and the use of large circles are expected, then you need to take more power from 1.5 kW.

Rotational speed . This parameter is responsible for the speed of the spindle on which the disk is attached. For large disks it can be up to 9 thousand rpm. Advanced models are equipped with a manual rotation speed control. This allows for customization depending on the type of work.

One-handed and two-handed . This criterion directly affects safety and ease of use. Both options can be found on sale. One-handed models are widespread among light grinders, both domestic and professional.

Two-handed is a more powerful and weighty option, a semi-professional and professional tool. To work safely, you need to use a secure grip; you cannot do without good physical training. Some models are equipped with vibration suppression systems and rubber coating for a firm grip.

Additional features of grinders

A good grinder has many additional functions that extend its service life and make work much easier. But the more features, the higher the price. Additional functions:

1. “Soft trigger” - allows you to launch the tool without jerking.
2. Switching off the brushes when the current fails.
3. Balancing the disc automatically allows the disc to wear evenly and reduces vibration in the hands.
4. Fixing the “Start” button during long periods of work.
5. Replacement of the casing without the use of additional tools.
6. Additional protection from dust for the armature and stator of the angle grinder.
7. Possibility of connecting a vacuum cleaner for dust removal.

Before using the tool, carefully read the instructions to avoid errors that could lead to damage. The reliability of the fastening of the grinding disc and the protective casing is checked before starting work. Using a disc that is not worn out and technically sound will help avoid its destruction and injury from fragments flying at high speed.

Interskol UShM-150/1300

Average grinder Interskol, suitable for work of medium and low intensity. The model is suitable for use by both beginners and professionals. The tool is lightweight, compact in size and has good power.
The device is suitable for painting and grinding metal surfaces, cutting pipes , removing rust from the surface, and removing paintwork.

Specifications:

• Powerful motor provides fast spindle speed of 8500 rpm. Such a high rate makes cutting and grinding metal smooth, without jerking. Grouting and sanding occurs as efficiently as possible.
• The Interskol grinder uses discs with a diameter of 150 mm, which allows not only grinding, but also cutting of material.
• The weight is 2.9 kg, which is light for this type of device, and provides less fatigue during prolonged use.
• To replace the carbon brushes, you do not need to completely disassemble the device; the required location is located outside.
• The spindle lock allows you to change grinding and cutting discs in a matter of seconds.
• Additional precision in work and a reliable grip is provided by the side handle, which can be removed.

Price Interskol angle grinder-150/1300-3200 rub.

Interskol UShM-230/2300M

Powerful and productive professional-grade grinder. The Interskol UShM-230/2300M model was developed for experienced and demanding users and intensive everyday use.
Can be safely used in difficult conditions during prolonged work. The Interskol grinder is designed for cutting and grinding metal , metal pipes, cleaning rust, removing paint and varnish coatings, cutting brick, concrete, stone and other hard surfaces.

Tool characteristics:

1. The powerful motor provides a spindle speed of 6500 rpm. Thanks to this, the device does its job quickly and efficiently.
2. This model can work with discs up to 230 mm, which makes almost all types of work on metal, stone, grouting and surface grinding possible.

Design Features:

• easy disc replacement is carried out thanks to the spindle lock;
• the tool is very powerful, the use of an additional handle is mandatory, which ensures a secure grip and additional accuracy;
• carbon brushes can be easily replaced without opening the entire case; the necessary compartment is located outside;
• The power button is equipped with restart protection.

Price Interskol UShM-230/2300M - 5990 rub.

Interskol UShM-125/900

The Interskol tool has high speed and sufficient power, which is enough for most operations using an angle grinder (polishing, grinding, cutting materials).
Low weight and dimensions allow you to work with one hand, which is convenient for limited space (the bottom of the car). According to its characteristics, the device is well suited for home use.

The power of the Interskol tool is 900 W, which is enough for grinding, polishing, cutting , stripping wood and other construction work. The cutting depth is ensured by a 125 mm disc. High productivity is ensured by spindle rotation speeds of up to 11 thousand rpm.

Light weight and compact size allow you to use the device with one hand, maintaining accuracy and high accuracy. Thanks to the spindle lock button, disc replacement is done in seconds.

The power button lock makes long-term operation convenient. You cannot use equipment that is not suitable in diameter with Interskol UShM-125/900, only diamond and abrasive discs with a diameter of 125 mm and a hole of 22 mm.

Price Interskol UShM-125/900–2972 rub.

Interskol UShM-230/2600M

The Interskol model UShM-230/2600M is a professional type, designed for long-term use in difficult conditions.
Suitable for experienced users - builders, roofers, installers, repairmen. The Interskol UShM-230/2600M device can easily cope with cutting metal workpieces, cleaning, grinding large surfaces, removing rust and paint.

Technical specifications:

1. Electric motor power 2.6 kW, rotation speed 6500 rpm. This is enough for smooth and fast operation.
2. It is possible to use discs up to 230 mm, which ensures the processing of large surfaces. And with a cutting depth of up to 70 mm, you can cut any workpiece.

Design features:

• to facilitate the replacement of disks, there is a spindle lock on the device body;
• the soft start system maintains a gradual increase in speed when turned on, which increases the service life and safety of the tool;
• An additional side handle increases your grip, and to increase accuracy it is equipped with a rotating mechanism.

Price Interskol UShM-230/2600M - 6950 rub.

Device repair

There is no such thing as an eternal tool, so it sometimes breaks. The same thing can happen with the Interskol grinder. Any malfunctions can be divided into mechanical and electrical.

For repairs, you will need to have factory instructions, a device, a tester, and wrenches. Disassembling the device will not be difficult, especially if you have its factory instructions at hand. But it’s better to turn to professionals who will set up the tool quickly and efficiently.

Interskol UShM-180/1800M

The Interskol UShM-180/1800M model belongs to the middle level and is intended for use in various types of work.
Suitable for both beginners and professional craftsmen. The main area of ​​application is cutting and grinding metal surfaces, removing rust and paintwork. The tool has the following technical parameters:

• The spindle speed is 8 thousand rpm, which ensures speed and smooth operation.
• An additional side handle will help securely fix the tool and increase accuracy.
• The carbon brush can be changed without the use of additional tools or completely opening the housing; the required section is located outside.
• The engine is protected from dust and overloads.

Price Interskol UShM-180/1800M - 3995 rub.

Interskol UShM-125/1100E

It belongs to the universal line of Interskol machines and combines the qualities of a heavy and light tool and is capable of performing different tasks. The model can be used by both amateurs and professionals.

It has proven itself well when grinding metal, due to its high power but low spindle speed. The performance of the motor allows the use of all types of attachments, which expands the scope of application . The operation of the Interskol grinder is simple and will not cause any problems even for a beginner.

Design characteristics:

• a power of 1100 W is sufficient for use on most materials, including metal;
• circle diameter 125 mm, enough to perform household tasks;
• high spindle speed - 11 thousand rpm, ensures smooth operation.

Model design:

1. A speed controller with six modes will allow you to select the desired speed based on the material and type of work (grinding is done at low speeds, for accuracy, cutting metals at high speeds). The switch is recessed into the housing, which prevents accidental switching.
2. Smooth start, carries out a gradual increase in the speed of the angle grinder when starting.
3. Large vents provide a constant flow of air for cooling and blow away dust.

Interskol UShM-125/1100E allows you to use the entire arsenal of accessories for angle grinders. Discs larger than 125 mm cannot be used.

Price Interskol UShM-125/1100E - 3800 rub.

Description of the tool

The Interskol angle grinder is an electric tool , its operating principle is based on the rotation of the disk at high speeds. The disc is usually made of abrasive materials capable of cutting metal and other hard substances. The Interskol angle grinder is powered by 220 volt electricity. The average power is about 1 thousand watts.

Structurally, the grinder is a small device with a handle and a seat for discs on the front part. The main problem of such machines is poor protection from dust particles and microelements formed during sawing or grinding. Interskol does not have these shortcomings. This was achieved by venting air directly towards the workpiece.

Sander equipment

Inside the device there is a powerful electric motor, which, using a gearbox, transmits torque to the disk. Some versions of the tool may have a speed controller. Using it, you can adjust the number of rotations from 3000 to 10000. This is especially true when working with parts that have delicate surfaces. The electronic system of the angle grinder is equipped with a special smooth start mechanism. This allows the disk to start not immediately when turned on, but with a certain delay, which helps to hold the device when working with heavy types of disks.

Some types of small angle grinders may be battery powered. The scope of application of such grinding machines is in hard-to-reach places where it is impossible to install electrical networks.

Specifications

Bulgarians Interskol are known for their rich capabilities due to their unique characteristics. They can be used where no other tool of this type will fit. The machine has the following characteristics:

• power consumption ranges from 900 to 1100 watts;
• speed 3000 to 10000 per minute;
• weight from 2.2 kg;
• cutting depth from 40 mm;
• soft start function.

Bulgarian Interskol UShM-115/900

Household angle grinder Interskol UShM-115/900, designed for low-intensity work.
A good option for novice users with no experience. The main purpose of the device is cutting and grinding metal , pipes, removing rust and paint coatings.

Powerful 900 W motor, capable of accelerating the spindle to 11 thousand rpm. This ensures smooth and fast work.

The disc diameter of 115 mm does not allow cutting deep metal workpieces, but it is suitable for grinding work. Light weight (2.1 kg) will ensure less fatigue during long-term work.

The spindle lock allows for quick changes of accessories . The power button lock will save you from the need to hold it during long-term work. An additional handle increases precision and improves grip.

Price Interskol UShM-115/900–2425 rub.

Interskol UShM-125/1000(T)

The high-speed angle grinder Interskol UShM-125/1000(T) is designed for housework .
The model is equipped with a powerful engine for this class of devices. The controls are simple, even a beginner can figure it out. The Interskol tool copes well with basic work - metal cutting, cleaning and grinding.

Characteristics of the grinder:

• The 1 kW electric motor provides a rotation speed of 11 thousand rpm, which makes an even and smooth cut.
• The diameter of the circle is 125 mm, which is enough to cut a medium-sized workpiece.

Tool design:

• for quick disk replacement, the device is equipped with a spindle lock;
• for ease of control and increased accuracy, an additional handle is provided;
• The casing reliably protects against sparks and fragments of materials.

Price Interskol UShM-125/1000(T) - 3800 rub.

Grinders produced by INTERSKOL

Interskol angle grinders are an excellent working tool, loved not only by professionals, but also by home craftsmen. Interskol grinders owe their popularity to:

• good work;
• reliability;
• ergonomics;
• ease of maintenance;
• increased power;
• environmental friendliness;
• as well as a variety of models.

The Interskol company produces angle grinders for different disc diameters - 115, 125, 150, 180 and 230 mm. The most popular were grinders of two classes:

1. Angle grinder with a disc diameter of 125 mm. They have a single body, a keyed connection of driven gears on the spindle. There are four models in this class: angle grinder 125/900, angle grinder 125/1000, angle grinder 125/1100E, angle grinder 125/1400EL Interskol.
2. Angle grinder with a disc diameter of 230 mm. Two-handed design, driven gears are pressed onto the spindle shaft. These are professional models with high power - more than 2000 W. There are ten models in this class, including models with speed control.

Grinders Interskol also have a weak point - the gearbox. However, in general, angle grinders of this brand are worthy of well-deserved praise, and purchasing such a power tool will be the right decision. You can find the right angle grinder model in the TOPSTO online store, where to simplify the search for products there are a number of selection criteria, as well as online chat with our managers. In addition, we provide delivery throughout Crimea and provide guarantees from the manufacturer.