3B633 Floor-standing grinding and grinding machine diagrams, description, characteristics

3B633 Floor-mounted grinding and grinding machine. Purpose, scope

The sharpening and grinding machine with two wheels model 3B633 is designed to perform the following operations:

• a) sharpening of cutters up to 50 mm high (high-speed and equipped with carbide plates);
• b) sharpening of drills with a diameter from Ø 6 to 25 mm and from Ø 12 to 50 mm;
• c) metalworking work (removal of burrs, chamfers, etc.);
• d) sharpening metalwork tools;
• e) grinding parts with an abrasive tape;
• e) polishing of parts.

Design features and operating principle of the machine

3B633 sharpening and grinding machine are: bed, head, wheel mounting, protective covers, rotary table, tool rest and electrical equipment.

The controls of the machine are a spindle speed switch (Figure 2), a control button with a black pusher “Start”, a control button with a red pusher “Stop”, and a rotary table moving handle.

Accessories are supplied with the grinding machine.

The kinematic diagram of the machine consists of a motor whose shaft is a spindle. This diagram is simple and therefore is not included in the manual.

Machine bed

The upper supporting surface of the frame has two windows that connect the internal cavity with windows for cooling located in the electric motor of the head. The panel with electrical equipment is mounted on four bosses inside the frame. An opening in the front wall, hermetically sealed with a door, allows access to electrical equipment. A control panel with a push-button station and a spindle speed switch is mounted on the front wall of the frame.

In the upper part of the side walls of the frame there are grooves for attaching a bracket with a tool rest, a rotary table or a device for sharpening drills. On the back wall of the frame there is a threaded hole for the grounding bolt.

Grinding head

The head is the main part of the machine. It is a two-speed electric motor, the shaft of which is the spindle of the machine (Fig. 3). The bearing supports are double high-precision angular contact ball bearings No. B36207 with selected axial play. On the outer sides, the seal is formed by lids, on the inner sides by fatty grooves. The electric motor is cooled by air circulating in the head and frame:

There are two trunnions on the head covers for attaching protective covers and some devices (for polishing, belt grinding, etc.). The head is attached to the frame with studs.

Wheels of PP type 300x40x127 are installed on the machine. The circles are mounted on adapter flanges (Fig. 4), which, in turn, are mounted on the conical part of the spindle.

Grinding and grinding machine - TSh 2 - TSh 1 - 3k634 and others

Sharpening grinding machines are used in production for sharpening and finishing the working part of tools used to process products made of metal, wood and other materials. Drills, cutters, knives, scissors - all tools that have a cutting edge (blade) can be sharpened quickly and efficiently only on such a machine.

Benchtop grinding machine DeWALT DW-753

• A grinding machine is also used in cases where it is necessary to remove burrs, chamfer the finished contour of a product, clean or peel (remove) rust, paint, or a small layer of excess material from the surface of a part or workpiece.
• It is possible to use such a machine for manual grinding or polishing of finished metal products.

about the types and features of Energomash sharpening machines.

Varieties

The operating principle and basic structural layout of devices of this type are almost the same for all models. The division into separate groups, according to purpose and application, can be done in the following form:

• small tabletop - has a grinding wheel with a diameter of 100 to 175 mm. Used when working with small tools and parts;
• medium floor - the grinding wheel on such a machine in diameter corresponds to parameters from 200 to 350 mm. The main purpose is sharpening of various types of cutters at industrial enterprises;
• large industrial - grinding wheel with dimensions of 400 mm and larger. Mainly used for roughing and stripping, as well as for grinding and polishing parts.

Grinding head

Grinding head of grinding and grinding machine 3B633

Spindle of grinding machine 3B633

3B633 Location of the main components of the grinding machine

Location of the main components of the 3B632 sharpening and grinding machine

3B633 list of main components of a grinding machine

1. Bed - 3B633.10.000
2. Head - 3B633.21.000
3. Fastening the PP circle - 3B633.30.00
4. Right casing
5. Right rotary table - 3B633 46.000
6. Dust collector - 3B633.54 000
7. Pipe branch
8. Left casing
9. Visor - 3B633.44.00
10. Screen
11. Left hand rest - 3B633.43.000
12. Retractable damper - 3B633.56.000
13. Switch
14. Switch with black pusher “Start”
15. Switch with red pusher “Stop”
16. Rotary table movement handle.

3B633 list of accessories for sharpening and grinding machine

1. Device for sharpening drills with a diameter of Ø 12-50 mm - 3Б633.50.000
2. Adapted for sharpening drills with diameters Ø 6-25 mm - 3Б633.50 000
3. Device for belt grinding - 3B633.51.000
4. Polishing device - 3B633.52.000
5. Left rotary table - 3B633.53.000
6. Device for dressing wheels - 3B633.55 000
7. Right hand tool - 3B633.57.000

Device for straightening the encryption wheel

Device for sharpening drills Ø 12..50 mm

Device for sharpening drills Ø 6..25 mm

Belt Sanding Attachment

Technical characteristics of the grinding machine for sharpening cutters 3B633

Technical characteristics of the grinding and grinding machine 3B633

Bibliography:

1. Grinding and grinding machine 3B633. Operating instructions, Tiraspol, 1967
2. Grinding and grinding machine 3B633. Operating instructions, Dushanbe,
3. Dibner L.G., Tsofin E.E. Sharpening machines and semi-automatic machines, 1978
4. Demyanovsky K.I., Dunaev V.D. Sharpening wood cutting tools, 1965
5. Kudryashov A.A. Tool production machines, 1968
6. Lisova A.I. Design, adjustment and operation of metal-cutting machines, 1971
7. Menitsky I.D. Universal sharpening machines, 1968
8. Paley M. M. Technology of production of metal-cutting tools, 1982
9. Rozhkov D.S. Design, setup and operation of equipment for sharpening wood-cutting tools, 1978

Related Links. Additional Information

• Classification and main characteristics of the grinding group
• Repair, restoration and modernization of grinding machines: the American approach
• Cylindrical grinding. Processing on cylindrical grinding machines. Grinding Methods
• Setting up a cylindrical grinding machine when installing parts in centers
• CNC grinding machines
• Marking of grinding wheels
• Testing and checking metal-cutting machines for accuracy
• Grinding machines. Market of grinding machines in Russia
• Directory of grinding machine manufacturers
• Directory of factories producing metal-cutting machines
• Directory of surface grinding machines
• Articles on the topic

Home About the company News Articles Price list Contacts Reference information Interesting video KPO woodworking machines Manufacturers

Certificates for grinding machines

To maintain and carry out technical regulations, repairs, and settings of grinding machines, the company needs documentation for the following equipment - see the table below. Ready to exchange for the one you have. A mobile team with the appropriate tools will repair your grinding machine. We repair and adjust hydraulics, hydraulic drives, and thick and liquid lubrication systems. We modernize pumping units and oil change and pumping systems.

3M451G Spline grinder
2	passport	3G71 Grinding
3	passport	3EP84 Grinding
4	passport	SOI-10 Grinding
5	passport	SZ-10-10 Grinding
6	passport	SZ-16-12-4\22 Grinding
7	passport	AT-320MS Grinding
8	passport	AFB\UFB Kikinda Grinding
9	passport	SZTP-600 Grinding
10	passport	SIP800 Grinding
11	passport	SIP800K1 Grinding
12	passport	TSh-400 Grinding
13	passport	ХШ5-05 Grinding
14	passport	3E881M Grinding and polishing machine
15	passport	5U877 Worm grinding machine
16	passport	3K833 Honing
17	passport	BPH-20N Universal grinder
18	passport	5K821V Universal thread grinder
19	passport	5K822V Universal thread grinder
20	passport	5D822V Universal thread grinder
21	passport	310P Universal cylindrical grinder with increased precision.
22	passport	3M131 Universal cylindrical grinder
23	passport	3M132 Universal cylindrical grinder
24	passport	3U10V Universal cylindrical grinder
25	passport	3U12VF11 Universal cylindrical grinder
26	passport	3U12UVF10 Universal cylindrical grinder
27	passport	3У131 Universal cylindrical grinder
28	passport	3U131V Universal cylindrical grinder
29	passport	3U131VM Universal cylindrical grinder
30	passport	3У132 Universal cylindrical grinder
31	passport	3U132V Universal cylindrical grinder
32	passport	3U132VM Universal cylindrical grinder
33	passport	3U133 Universal cylindrical grinder
34	passport	3U133VM Universal cylindrical grinder
35	passport	3У142 Universal cylindrical grinder
36	passport	3U142V Universal cylindrical grinder
37	passport	3U142MV Universal cylindrical grinder
38	passport	3У143 Universal cylindrical grinder
39	passport	3U143MV Universal cylindrical grinder
40	passport	3У144 Universal cylindrical grinder
41	passport	3U144MV Universal cylindrical grinder
42	passport	3131 Universal cylindrical grinder
43	passport	3A10P Universal cylindrical grinder
44	passport	3A130 Universal cylindrical grinder
45	passport	SU315 Universal cylindrical grinder
46	passport	3D641E Universal sharpening modernized
47	passport	3D642E Universal sharpening mechanized
48	passport	3B641 Universal sharpening
49	passport	3B642 Universal sharpening
50	passport	411 Universal sharpening
51	passport	412 Universal sharpening
52	passport	414 Universal sharpening
53	passport	3A64 Universal sharpening
54	passport	3A64D Universal sharpening
55	passport	3А64М Universal sharpening
56	passport	3E642 Universal sharpening
57	passport	3E642E Universal sharpening
58	passport	3M642 Universal sharpening
59	passport	3M642B Universal sharpening
60	passport	3M642E Universal sharpening
61	passport	3M642E-1 Universal sharpening tool
62	passport	3M666VF2 Universal sharpening
63	passport	6M642B Universal sharpening
64	passport	NUA-25M Universal sharpening tool
65	passport	3A227 Universal internal grinder
66	passport	3A227V Universal internal grinder
67	passport	3A227P Universal internal grinder
68	passport	3A228 Universal internal grinder
69	passport	3A228P Universal internal grinder
70	passport	3A229 Universal internal grinder
71	passport	3A250 Universal internal grinder
72	passport	3G71M Un. surface grinder high exact from the mountains spin-eat and straight table
73	passport	3B182 Un. Kruglosh. centerless especially high precision
74	passport	3B633 Sharpening and grinding machine
75	passport	3B634 Sharpening and grinding machine
76	passport	3B633 Sharpening and grinding machine
77	passport	3B641 Sharpening and grinding machine
78	passport	3K633 Sharpening and grinding machine
79	passport	3T636 Sharpening and grinding machine
80	passport	3T636-1 Sharpening and grinding machine
81	passport	TS-1 Sharpening grinder
82	passport	TS-2 Sharpening grinder
83	passport	TS-3 Sharpening grinder
84	passport	SA12M Face Grinding
85	passport	SA2M Face Grinding
86	passport	B3-322 Machine for sharpening drills
87	passport	B3-323 Drill sharpening machine
88	passport	1300 Production grinding machines
89	passport	1305 Production grinding machines
90	passport	1049 Production cylindrical grinding machines
91	passport	1051 Production cylindrical grinding machines
92	passport	3E756L-1 Semi-automatic surface grinder
93	passport	ShL-11 Semi-automatic belt grinding machine
94	passport	ShL-12 Semi-automatic belt grinding machine
95	passport	5М841Ф11 Semi-automatic gear grinding machine
96	passport	VZ-205F3 Semi-automatic grinding machine with CNC
97	passport	VZ-208F3 Semi-automatic grinding machine with CNC
98	passport	3662 Semi-automatic for sharpening hobs
99	passport	3A662 Semi-automatic for sharpening hobs
100	passport	3B852 Polishing and grinding double-sided
101	passport	3B853 Polishing and grinding double-sided
102	passport	3B854 Polishing and grinding double-sided
103	passport	3B853 Polishing and grinding machine
104	passport	3B854 Polishing and grinding machine
105	passport	3B855 Polishing and grinding machine
106	passport	3E711VF2 Surface grinder with cross table......and CNC
107	passport	3L722(A),(B),(70,80… Surface grinder
108	passport	371 Surface grinder
109	passport	451 Surface grinder
110	passport	3722 Surface grinder
111	passport	53322 Surface grinder
112	passport	332B Surface grinder
113	passport	372B Surface grinder
114	passport	3A814 Surface grinder
115	passport	3B722 Surface grinder
116	passport	3B724 Surface grinder
117	passport	3B756 Surface grinder
118	passport	3B814 Surface grinder
119	passport	3D711VF11 Surface grinder
120	passport	3D711VF1-1 Surface grinder
121	passport	3D721AF11-1 Surface grinder
122	passport	3D722 Surface grinder
123	passport	3D722F1 Surface grinder
124	passport	3D725 Surface grinder
125	passport	3E710A Surface grinder
126	passport	3E711AF1 Surface grinder
127	passport	3E711AF1-1 Surface grinder
128	passport	3E711V Surface grinder
129	passport	3E711V-1 Surface grinder
130	passport	3E711VU Surface grinder
131	passport	3E711VF1 Surface grinder
132	passport	3E721 Surface grinder
133	passport	3E721V-1 Surface grinder
134	passport	3E756 Surface grinder
135	passport	3E756L Surface grinder
136	passport	3E816F1 Surface grinder
137	passport	3K634 Surface grinder
138	passport	3L463 Surface grinder
139	passport	3L722-1600 Surface grinder
140	passport	3L722A(V) Surface grinder
141	passport	3L722V(320Х800) Surface grinder
142	passport	3L722V-001 Surface grinder
143	passport	3L722V-002 Surface grinder
144	passport	3L722V-70 Surface grinder
145	passport	3L722V-80 Surface grinder
146	passport	451AR Surface grinder
147	passport	451Р Surface grinder
148	passport	5887 Surface grinder
149	passport	LSh-156 Surface grinder
150	passport	LSh-230 Surface grinder
151	passport	3D740V Surface grinding with rectangular table and mountains spindle
152	passport	SPC-20b Surface grinder with horizontal spindle axis
153	passport	3E180V P\auto-t centerless cylindrical grinder
154	passport	3E183A P\auto-t centerless cylindrical grinder
155	passport	3E183AM P\auto-t centerless cylindrical grinder
156	passport	3E183VM P\auto-t centerless cylindrical grinder
157	passport	3E183M P\auto-t centerless cylindrical grinder
158	passport	3E184 P\auto-t centerless cylindrical grinder
159	passport	3E184A P\auto-t centerless cylindrical grinder
160	passport	3E184AM P\auto-t centerless cylindrical grinder
161	passport	3E184V P\auto-t centerless cylindrical grinder
162	passport	3E184VM P\auto-t centerless cylindrical grinder
163	passport	3E184VN P\auto-t centerless cylindrical grinder
164	passport	3E185VM P\auto-t centerless cylindrical grinder
165	passport	3M132V P\automatic cylindrical grinder
166	passport	3M162V P\automatic cylindrical grinder
167	passport	3M162MVF2 P\automatic cylindrical grinder
168	passport	3D692 P\automatic sharpening machine for circular saws
169	passport	3B662VF2 P\automatic sharpening machine for high-precision CNC hobs.
170	passport	3B663VF2 P\automatic sharpening machine for high-precision CNC hobs.
171	passport	3E692 P\automatic grinding machine
172	passport	VZ-187 P\automatic grinding machine
173	passport	3E653 P\av. sharpening machine for drills, countersinks and taps
174	passport	3E659 P\av. sharpening machine for drills, countersinks and taps
175	passport	3M225AF2 p\av. Internal grinding
176	passport	3M225VF2 p\av. Internal grinding
177	passport	3M227 p\av. Internal grinding
178	passport	3M227AF2 p\av. Internal grinding
179	passport	3M227VF2 p\av. internal grinding
180	passport	LSh-220-05 P\a flat-profile grinding
181	passport	3M667F2 sharpening tool for CNC end mills
182	passport	395M Optical profile grinder
183	passport	D961 Roughing and grinding
184	passport	М3-11ВМ-01 Roughing and grinding machine
185	passport	3E184KVF2RM Flexible production cylindrical grinding module
186	passport	3K12 Universal cylindrical grinder
187	passport	3K12M Universal cylindrical grinder
188	passport	3B151P High precision cylindrical grinder
189	passport	3B153U High precision cylindrical grinder
190	passport	3B161P High precision cylindrical grinder
191	passport	3E153 Extra high precision cylindrical grinder
192	passport	3M182 Centerless cylindrical grinder
193	passport	3M184 Centerless cylindrical grinder
194	passport	3М184А Centerless cylindrical grinder
195	passport	3A172 Cylindrical grinder
196	passport	3A172B Cylindrical grinder
197	passport	3A174 Cylindrical grinder
198	passport	3A423 Cylindrical grinder
199	passport	3B12 Cylindrical grinder
200	passport	3B423 Cylindrical grinder
201	passport	3D4230 Cylindrical grinder
202	passport	3D4230A Cylindrical grinder
203	passport	3M151 Cylindrical grinder
204	passport	3М151В Cylindrical grinder
205	passport	3M152 Cylindrical grinder
206	passport	3M153 Cylindrical grinder
207	passport	3M153A Cylindrical grinder
208	passport	3M153U Cylindrical grinder
209	passport	3М152В Cylindrical grinder
210	passport	3M162 Cylindrical grinder
211	passport	3M163 Cylindrical grinder
212	passport	3М163В Cylindrical grinder
213	passport	3M164 Cylindrical grinder
214	passport	3M173 Cylindrical grinder
215	passport	3M174 Cylindrical grinder
216	passport	3М174В Cylindrical grinder
217	passport	3M175 Cylindrical grinder
218	passport	3M184I Cylindrical grinder
219	passport	3M193 Cylindrical grinder
220	passport	3M194 Cylindrical grinder
221	passport	3M195 Cylindrical grinder
222	passport	3M196 Cylindrical grinder
223	passport	3M197 Cylindrical grinder
224	passport	3M198 Cylindrical grinder
225	passport	3U10A Cylindrical grinder
226	passport	3U10MAF10 Cylindrical grinder
227	passport	3U120A Cylindrical grinder
228	passport	3U12AF11 Cylindrical grinder
229	passport	3U12V Cylindrical grinder
230	passport	3У12УА Cylindrical grinder
231	passport	А11\А11у Kikinda Cylindrical Grinder
232	passport	Ш-149 Cylindrical grinder
233	passport	GLS-125-10 Optical projection copy grinder
234	passport	GLS-125A Copy Grinder Optical Projection
235	passport	GLS-80A Copy Grinder Optical Projection
236	passport	GLS-80F Copy grinder
237	passport	3M433U Copy-grinding. for regrinding camshafts. shafts
238	passport	32K84SF-01 CNC coordinate grinding machine
239	passport	ShLPS-6T Combined grinding-belt
240	passport	540 (152x457mm) Instrumental precision surface grinder
241	passport	ZSTS-1250 Gear grinder
242	passport	TP21.014.00.000 TO Sharpening
243	passport	3A852 Double-sided polishing machine
244	passport	HVR90 Horizontal grinder
245	passport	3225 Internal grinding
246	passport	3271 Internal grinding
247	passport	3225P Internal grinding
248	passport	3K225 Internal grinding
249	passport	3К225А Internal grinding
250	passport	3K225V Internal grinding
251	passport	3К227А Internal grinding
252	passport	3К228А Internal grinding
253	passport	3К229А Internal grinding
254	passport	3К229В Internal grinding
255	passport	NBY Internal grinding
256	passport	MATRIX No. 24 Internal thread grinding
257	passport	МВ125С5 Internal thread grinding
258	passport	S-827 Internal thread grinding
259	passport	3G833 Vertical honing
260	passport	3A184 Centerless grinding
261	passport	3A184P Centerless grinding
262	passport	VSh606M Centerless grinding
263	passport	3622D Diamond grinder for cutters
264	passport	3V622D Diamond sharpening (finishing) for cutters