Rating of rolling jacks for 2, 3 tons, 13 best models

A rolling jack is used as equipment for raising the car to a comfortable height in order to replace the wheel. Many car owners have it in the trunk so that in difficult times they can use it on any section of the road. Therefore, when making a purchase, it is important to decide which 2 t rolling jack will be best for a particular car.

Category	Name	price, rub.	Short description
The best domestic rolling jack	SPARTA 510084	1550 – 1900	Equipped with a safety valve and designed to lift loads over 2 tons.
The best domestic rolling jack	Stankoimport NM5903	8490	It has a hydraulic system and a manual drive, a cardan mechanism that guarantees a smooth descent of the load.
The best compact rolling jack	ROCK FORCE RF-TR20005	4350	Available in a compact case.
	BelAvtoKomplekt	1600	Designed to lift a load of 2 tons to a maximum height of 32 cm.
	BISON Professional 43057-2.5-K	3400 – 4000	Designed to lift a load of 2.5 tons to a minimum pick-up height of 89 mm and a maximum of 359 mm.
	MATRIX MASTER 51028	3000	Compact, has a storage case, which makes it convenient for transportation and storage in the trunk.
The best two-piston trolley jack	OHT230 g/p	7500 – 1000	Designed for lifting low-slung vehicles.
The best two-piston trolley jack	BottLine Jack 2 t	1600	The presence of a special valve protects against overload and makes it possible to exceed the designated threshold by 25%.
The best pneumohydraulic rolling jack	AET Т22022 3t	7500	In terms of lifting, the minimum is 225 mm and the maximum lift is 515 mm, with the weight of the equipment itself being 36 kg.
The best pneumohydraulic rolling jack	Stankoimport SD 1904	30000	The jack is equipped with a sleeve for connecting to a source of compressed air; it can comfortably lift any type of vehicle.
The best mobile rolling jack	AUTOPROFI DP-17K	2000	The mobility of the equipment is ensured by a pair of wheels, which simplify its use.
The best rolling jack with low lift	STELS EQUIPMENT STELS 51131	3500 – 5000	The device is equipped with 2 wheels, a handle and a tray for storing additional accessories.
The best rolling jack with low lift	DA5P120K	4000	This type of jack can be used to lift various objects at a short distance from the ground.

How to choose a rolling jack

Choosing a rolling jack

A jack is equipment designed to lift heavy and bulky cargo to a given height. Its use guarantees safe work for a craftsman or car enthusiast under the bottom of a vehicle.

Long-term equipment service is guaranteed if all parameters are taken into account:

load capacity;
girth or lift height;
brand of equipment;
compliance of technical indicators with car parameters.

Load capacity

To correctly determine the ability to lift weights, you need to study the weight of your car, take into account the approximate daily load, and based on the data obtained, buy a device. On average, jacks are distributed by type as follows:

for passenger cars screw;
for SUVs, rolling or bottle;
the remaining options are for trucks.

Important! Failure to comply with the manufacturer's requirements can lead to breakage of the mechanism itself and damage to the vehicle.

Lifting height

This is a measure of the lifting of the load from the jack's fulcrum point to the maximum height that should be ideal for changing a tire. On average it is 300 - 500 mm.

If it is necessary to raise the car higher, then rack and pinion jacks are used. They are used to lift the car to a height of up to a meter and are required when traveling off-road, for example, during competitions.

Pickup height

This indicator is the second most important; when determining it, it is necessary to take into account the size of the vehicle's ground clearance. It guarantees the convenience of using the device under the bottom of the machine, since it indicates the size of the equipment itself; it is from this parameter that the lifting begins.

For example, any jack on side members will be suitable for an SUV, since the car has decent clearance. For a passenger car, you can only use bottle or rolling jacks, since its ground clearance is no more than 150 mm.

On average, the pick-up value, depending on the model, is 6 – 25 cm.

If the model specification indicates the working stroke of the jack, this indicates the maximum value within which actions can be performed. The larger it is, the more convenient the device.

type of drive

The drive option determines the comfort of using the device more, as it indicates the option for actuating it:

Mechanical - equipped with a special handle, which makes it possible to lift the load to the required height. Equipment with a mechanical drive has an affordable price. It is optimal for small cars.
Hydraulic – also equipped with a special handle for lifting. However, here the effort is minimal, since the lifting is carried out by liquid. The device is very convenient and easy to use.
Pneumatic - its operation requires compressed air, for example, a cylinder or car exhaust. The action occurs due to air supply. The owner makes no effort. Such a jack is effective in action - it will lift any weight and pull the car out of the mud. The device is used for cars and in construction.

Important! For a personal car you need to buy a mechanical jack. If the equipment will be used en masse, then you need to purchase a hydraulic or pneumatic jack.

Additionally, the manufacturer's brand is taken into account. But the company should not play the first role, since the main thing is the correspondence of the device data and the car.

By purchasing branded equipment, the user protects himself from any surprises such as low-quality materials or susceptibility to corrosion.

Important! The jack from the manufacturer has a guarantee of uninterrupted operation for a period of 1 to 3 years.

Main selection criteria

Basic criteria for choosing a rolling jack

Which rolling jack to choose, and who is the best manufacturer? There is no clear answer. When choosing a lifting device, it is necessary to determine the characteristics that it must meet. Let's consider the main characteristics.

Maximum height. A rolling jack for an SUV or crossover should take this parameter from 450 mm, due to the large travel of their suspension. If the lifting height is insufficient, then removing the wheel simply will not work.
Minimum height. Typically, the minimum pick-up height is in the range from 125 to 140 mm. For lovers of low ground clearance, there are low-profile rolling jacks with a lifting height of 75 - 90 mm.
Lifting speed. The presence of an additional pedal significantly increases the ascent speed.
Load capacity. Selected based on the weight of the vehicles being serviced. A 2t hydraulic rolling jack, the price of which is quite low, can be suitable for a garage with a small car. But the owner of more serious equipment, an avid “jeeper,” needs to select a 3-ton rolling jack. It will cope better with the task. And this is provided that the weight of the car does not exceed the limit value.
Convenience. The presence of a rubber stop on the lifting platform and protection on the handle to prevent damage to the coating on the car.
Mechanism for transmitting force from the handle to the shut-off valve (gear, cardan). The optimal option is a cardan transmission. It is more reliable, wear-resistant and cheaper to repair in case of breakdown.

Article on the topic: Assessing the fuel consumption rate of the Chevrolet Epica 2.0

Also pay attention to the presence of caps on the plunger. They create additional protection for the mechanism from dirt, corrosion and reagents and are highly desirable. The presence of additional oilers on heavily loaded components is also welcome.

After purchasing and before using the jack, read its instructions. Subsequently, this can save you from many problems during its operation. The already mentioned latch, inserted into a special mounting hole, significantly increases the safety of work when the load is raised. And although safety regulations clearly prohibit operation without a stop, this requirement is often not met. The presence of a lock is guaranteed to avoid sudden folding of the jack, which may result from a malfunction of the hydraulic lift mechanism, but does not exclude its mobility. Also pay attention to the lever. It can be long or short, and can have specific handle shapes, which makes lifting more comfortable. An important characteristic is the length of the jack lever handle. It is unlikely that anyone will deny that a 3.5 ton rolling jack is easier to operate with a long handle, since it is easier to lift a heavy car with such a lever. For passenger cars, a shorter handle is practical. Although, many manufacturers have provided the option of composite lever handles, which have the ability to adjust the length based on the situation. The material of the case and its thickness also play an important role. An aluminum rolling jack will withstand less load than a similar steel one, but will have significantly less weight. The choice can also be greatly influenced by the manufacturer - a Russian-made rolling jack or a foreign one. The jacks of our Chinese comrades are held separately.

The best domestic rolling jack

Domestic equipment SPARTA

SPARTA 510084 – equipped with a safety valve and designed for lifting loads over 2 tons. The price, depending on the supplier, varies from 1,550 rubles to 1,900 rubles.

It has a minimum lifting height of 14 cm and a maximum of 28.5 cm. This makes it indispensable for use in construction work and at car repair stations. The maximum permissible lift is sufficient to place a rigid support under the load and carry out repair work. The presence of a safety valve prevents the load from being lifted beyond that stated by the manufacturer.

Important! SPARTA 510084 is not intended for long-term use or lifting loads.

Stankoimport NM5903 has a hydraulic system and a manual drive, a cardan mechanism that guarantees a smooth descent of the load. The presence of a safety valve that will prevent the device from overloading. The cost is significant - 8,490 rubles.

A special coating on the surface of the jack protects the car from scratches during interaction. The device is designed for lifting loads up to 2.5 tons in a garage, so it is widely used by car enthusiasts. It has 2 wheels for mobile use.

Important! Stankoimport NM5903 has a reasonable price, a Russian brand and a Chinese manufacturer.

Main characteristics

Load capacity . Load capacity starts from 2t and above. For a simple passenger car for everyday needs, a carrying capacity of 2 tons is enough. This tool does not take up much space; it can be stored in the garage and taken with you on a trip. If you have an SUV, a load capacity of 3t or more is recommended. In any case, it is better to know the weight of the car in advance and be guided by its value in the choice.
Maximum lift height. It is different for each model. SUV owners need to pay maximum attention to this parameter. There is no point in paying for a tool that lifts the car by 2 cm. The maximum lift height for SUVs starts at 450 mm.
Minimum height. The parameter determines the ability to roll the device under a car. A rolling jack with a minimum height greater than the ground clearance of your car will not help you. Be sure to measure the ground clearance before choosing.
Ease of use. Rubber pad, on the supporting support.
Type of mechanism drive. Cardan and gear. The recommended cardan type, it has proven its reliability and is also more repairable.

The best compact rolling jack

ROCK FORCE

ROCK FORCE RF-TR20005 with a price of 4,350 rubles in a compact case, has the following characteristics:

load capacity – 2.5 t;
pick-up height 14 cm;
hydraulic, weighing 10.2 kg;
lifting height 39.5 cm.

BelAvtoKomplekt - designed for lifting a load of 2 tons to a maximum height of 32 cm. Depending on the model, the price starts from 1,626 rubles. When folded, it takes up minimal space.

BelAvtoKomplekt

BelAvtoKomplekt equipment is reliable and efficient. It has a minimally simplified design.

The product consists of a metal base and components, which minimizes the occurrence of malfunctions. The safety valve further prevents product failure or overload.

Has wheels for easy movement and a storage case.

Important! BelAvtoKomplekt is designed for flat and hard surfaces.

BISON Professional 43057-2.5-K of the Russian brand costs from 3,400 rubles to 4,000 rubles. It is designed to lift a load of 2.5 tons to a minimum pick-up height of 89 mm and a maximum of 359 mm.

The equipment has the following advantages of use:

Can be used for sports cars;
mobility and compactness;
access to use in small boxes with limited space;
high load capacity and wide operating range;
the presence of a rotary handle for working in confined spaces.

This is a budget option of the Russian brand. The jack is compact and mobile.

MATRIX MASTER 51028 is compact and has a storage case, which makes it convenient for transportation and storage in the trunk. Suitable for passenger cars. The average cost is 3,000 rubles.

MATRIX MASTER 51028

The model has hydraulics and a safety valve, so its use is acceptable both for individual car enthusiasts and for use in a workshop.

The jack is equipped with a lever handle, the use of which reduces the applied effort to a minimum and a strong frame that guarantees resistance to high loads. The presence of a case allows for compact storage.

The manufacturer's marking indicates professional use.

According to user reviews, this jack is the best in its segment, reliable and of high quality.

The downside is the cost of a jack with German origin.

Choosing a quality tool

Sealants for heating radiators: types and features of choice

The choice of jack must be made based on further goals. The main criterion: where will it be used? Will it be a car repair shop or a car enthusiast's private garage?

For car enthusiasts, everything is simple: to choose a device, you need to know the weight of the car and make a probable allowance. The lifting speed of the machine does not matter. A 3-ton rolling jack is suitable for this, with a small margin.

Service stations or tire shops have different requirements. For them, the lifting speed and load capacity of the device are important, so the choice of a rolling jack will be different.

When purchasing a jack, you should pay attention to the vehicle's ground clearance; it should be higher than the platform of the lifting device. Pay attention to the maximum lifting height of the mechanism: the higher, the more dangerous, and you can deform the body

The height of the jack that suits you should not be the maximum lifting height.

Pay attention to the maximum lifting height of the mechanism: the higher, the more dangerous, and the body can be deformed. The height of the jack that suits you should not be the maximum lifting height.

There is no need to buy a obviously powerful jack, especially with a small fulcrum. Using such a device can easily damage the body.

The first classification of a rolling hydraulic jack is its lifting capacity. Suffice it to say that this is the most important criterion. The type of vehicle this lift can operate with depends on this parameter.

The best two-piston trolley jack

Ombra

OHT230 lift capacity 3 tons, 133-485 mm, two-piston Ombra is designed for lifting low-slung vehicles to change wheels or carry out repairs. The price varies depending on the supplier from 7,500 rubles to 10,000 rubles.

The metal body with rubber support weighs 30.7 kg and is designed to lift a load of 3 tons. Type of equipment - hydraulic, double plunger, low profile. It has a lift of 133 mm and a maximum lifting height of 458 mm.

Used for self-service of low-slung cars. Comfort of use is ensured by wheels and a rotary handle. Large weight and dimensions guarantee the stability of the device.

Important! The device is equipped with a plug that allows excess air to be pumped out of the hydraulic system.

The Ombra model is the best among rolling jacks. After all, she has:

low cost;
sustainability;
2 pistons.

BottLine Jack 2 t is the best equipment for an SUV - it is small in size and has an affordable price of 1,600 rubles.

Everything about the device is attractive:

greater efficiency;
simplicity and reliability of design;
minimum effort in care.

The presence of a special valve protects against overload and makes it possible to exceed the designated threshold by 25%.

Important! The jack is intended only for lifting loads on a level surface. The model is not suitable for holding a load suspended.

The pick-up height is slightly reduced when the classic lift height is available. Therefore, when purchasing a device, it is important to calculate the size of the vehicle clearance.

To securely secure a lifted load, it is important to have parking shoes and safety stands.

Due to the simplicity of the design data and the presence of a hydraulic drive, the use of a jack guarantees a quick solution to the problem.

According to the manufacturer's recommendations, continuous operation of the equipment is 10 minutes, a strict prohibition regarding overloads, and use only on a flat surface.

Comparison with bottle jacks

When analyzing the key characteristics of bottle-type jacks and comparing them with the parameters of rolling devices, attention should be paid to the small area of the supporting platform. During the lifting process, the bottle jack may move, and as a result the load will no longer be directed strictly vertically

In the situation with the described category of lifts, the likelihood of such a phenomenon is almost completely eliminated

During the lifting process, the bottle jack may move, and as a result, the load will no longer be directed strictly vertically. In the situation with the described category of lifts, the likelihood of such a phenomenon is almost completely excluded.

When performing a comparative analysis of design and performance, it is necessary to highlight the following key advantages of rolling models.

Increased efficiency.
Sufficient load capacity with relatively small dimensions of the device. This ratio of characteristics is due to the horizontal positioning of the cylinder and the presence of a removable lever.
Smooth rise, high-quality fixation and gradual descent of the platform with a load, which is controlled by a special screw, and in some models, a pedal.
Maximum stability.
Simplicity and comfort of use.

Taking into account the fact that nothing is ideal, it is important to pay attention to the disadvantages of the type of lifting mechanisms under consideration, including:

relatively low ascent speed, which in some situations is a significant disadvantage;
the risk of a decrease in the pressure of the working fluid in the cylinder, leading to lowering of the load;
at negative temperatures, the performance of hydraulic systems deteriorates significantly, however, most often, rolling jacks are used in a garage or service station;
quite expensive repairs and a relatively short service life if not properly maintained and maintained;
the need to have the most hard and level surface possible to correctly install the lift;
low working height, if you do not take into account cargo models.

The best pneumohydraulic rolling jack

AET Т22022

AET T22022 3t hydraulic rolling tool has a lifting capacity of up to 22 tons, which makes it indispensable for repairing large cars. The average price is 7,500 rubles.

In terms of lifting, the minimum is 225 mm and the maximum lift is 515 mm, with the weight of the equipment itself being 36 kg.

Stankoimport SD 1904 – provides lifting of vehicles up to 50 tons. The jack is equipped with a sleeve for connecting to a source of compressed air; it can comfortably lift any type of vehicle. The wear resistance of the device is high due to high-quality material and the presence of a protective valve against overload. The presence of such indicators ensures that it costs 30,000 rubles.

The jack has a handle at the bottom of the body and two pairs of wheels. This model demonstrates excellent performance:

simplicity and excellent equipment;
protective coating of the body, which makes it durable;
pneumohydraulic drive;
extension for lifting rod;
The presence of rubberized handles and seals ensures comfortable use.

Which jack is better, rolling or bottle jack?

Bottle and rolling jacks

The main difference between a bottle jack is its small support. This means that such jacks may be unstable. Plus, when lifting a car, the jack begins to move slightly under load, and the load is not directed strictly vertically, but shifts to some extent. A rolling jack, when lifted, moves under the car, and the load goes vertically.

The best mobile rolling jack

AUTOPROFI DP-17K or DP-20 is reliable and easy to use, the mobility of the equipment is ensured by a pair of wheels that simplify its use. Designed only for small cars weighing up to 2 tons. The price is reasonable from 2,000 rubles.

The use of equipment only on a flat surface; hydraulics make it possible to lift to a height of 30 cm.

The presence of a plastic case and equipment weight of 7.7 kg makes it possible to comfortably move it in the trunk of a car.

The consumer points out the advantages of the jack as small size and mobility. But the lack of rubberized handles and the use of insufficient quality oil makes its use uncomfortable. In addition, the pen is not included in the case, so it is stored separately.

Rating of car jacks

Lifting should be safe, without heavy physical effort. When compiling the review, the VyborExperta.ru team tested products from well-known manufacturers presented in popular online stores. The equipment was studied using instrumental methods, reviews of car jacks from car owners and the opinions of tire service technicians were taken into account.

When compiling the rating, we considered:

Loading capacity - the weight of a small sedan differs from the weight of an SUV or minibus by 3-4 times. For cars with large loaded trunks, this difference can reach 4-5 times. The vehicle jack must match its weight;
Pickup height - the ground clearance of the car must correspond to the dimensions of the car jack, this will simplify the installation of the mechanism under the spar;
Lifting height - the larger the diameter of the wheel, the greater the height the jack should lift;
Design - manufacturers produce bottle, screw and roll-on models that differ in size, price, stability;
Type – car owners are offered pneumatic, hydraulic, and electric models.

Not all devices are equally reliable and functional. Low quality metal, poor quality hydraulic seals, breakdowns during operation - equipment with such characteristics were excluded from our rating.

The best rolling jack with low lift

STELS EQUIPMENT STELS 51131

Such a model should fully meet the needs of motorists whose vehicles have low ground clearance. Among similar jacks, we can highlight STELS EQUIPMENT STELS 51131 - its lifting height is only 10 cm. The device is equipped with 2 wheels, a handle and a tray for storing additional accessories necessary for its use. Cost from 3,500 to 5,000 rubles.

The presence of a rubber lining guarantees the stability of lifting the load.

The equipment has obvious advantages, such as:

metal wear-resistant case;
Feature of application for low-slung cars;
simplicity and ease of operation.

Along with this, there are also disadvantages such as heavy weight, so you can’t fit it in every trunk, and the lack of a storage case.

DA5P120K, designed for lifting loads for the purpose of:

repair;
fixing heavy structures;
props.

The jack is used:

during installation;
dismantling;
assembly in various living conditions.

This type of jack can be used to lift various objects at a short distance from the ground.

The device has:

reliable fastening and slip protection;
return springs ensuring that the device assumes its original position;
a pump that ensures that the specified parameters are achieved;
handles for transportation and handling.

The jack is designed to work in non-standard situations and in limited areas.

High-quality steel and the latest generation of sealing materials were used in the formation of the device.

The jack has a lifting capacity of 5 tons on the support and 2.5 tons on the foot. The rod stroke is 12 cm with a height of at least 2 cm.

The model has a hydraulic drive and a built-in pump that operates autonomously. The presence of such autonomy ensures the operation of the equipment without connection to external sources.

Types and models

Currently, there are 3 types of rolling jacks with a lifting capacity of 5 tons.

Hydraulic

This type of lifting mechanism is most often used in service stations and tire shops.

The principle of its operation is quite simple. Under the action of the handle, pressure begins to build up, the oil that is inside the device acts on the rod, and it rises. When the rod is lifted, the car itself begins to rise.

Pneumatic

The operation of a pneumatic lift is based on compressed air. The device consists of the following elements:

support frame;
stop for the bottom of the car;
an airtight cushion, for the manufacture of which manufacturers use high-strength rubber;
wheels;
valve;
plug.

The device lifts the car using air that enters the cushion. The mechanism is powered by electricity, and therefore it is less popular than a hydraulic jack. But it is worth noting that their performance is higher and the price is lower. Such a mechanism requires constant maintenance.

Pneumohydraulic

This is a universal device based on an oil cylinder that pumps up pressure. The mechanism is powered by electricity. Can lift very heavy loads.

Let's also look at the most popular models of the above types of rolling jacks.

Model	View	Specifications
Nordberg N3205N	Pneumohydraulic	Maximum load capacity – 5 tons. The maximum lifting height is 57 cm. Pickup height – 15 cm.
Kraftool 43455-5	Hydraulic	Maximum load capacity – 5 tons. The maximum lifting height is 56 cm. Pickup height – 15 cm.
Euro Craft 5 t	Pneumatic	Maximum load capacity – 5 tons. The maximum lifting height is 40 cm. Pickup height – 15 cm.

The most popular and high-quality manufacturers of rolling jacks today are the companies Intertool, Torin, Miol, Lavita.

If you want to purchase a professional, reliable and durable lifting mechanism for servicing a passenger car, experts recommend paying attention to the models of these manufacturers

The best screw car jacks

Characterized by its small size and low price, the diamond-shaped car jack has a screw design. The equipment has a low price, so manufacturers use these models as standard devices. Advantages: light weight, rigid frame, convenient installation for cars with low ground clearance.

Autoprofi DVB-20 Lo

Russian lift with telescopic support. The lifting height of 150 mm makes it convenient for working with domestic cars that have high ground clearance. A working stroke of 160 mm allows you to lift small crossovers. The collapsible gate has a total length of 85 cm, making it a convenient lever for servicing in difficult road situations.

It is small in size, weighs 3.5 kg, and you can always find a place for equipment in the trunk of a car. The body has an anti-corrosion protective coating. The red color makes the model noticeable at night, when accidents with wheels often occur.

Advantages:

Low price;
No oil leaks;
Good stability;
High quality lubricant.

Flaws:

No rubberized support.

AVS JA-2000R

The rhombic screw lift is made in Russia and is intended for passenger cars. The diamond-shaped frame is rigid, made of high-quality steel, and can withstand high static loads. The lift height of 120 mm makes the model universal, and the ability to lift the car by 413 mm allows you to work with crossover wheels. A high-quality worm gear makes the equipment reliable in any situation.

It is driven by a folding handle equipped with a rubberized handle. The lifting speed is high for this type of device. It works evenly, without backlash, which ensures high reliability. A good choice for those car owners who are used to using standard tools.

Advantages:

Sustainability;
Low price;
Simple scheduled maintenance;
Storage bag.

Flaws:

Not detected.

AvtoDelo 43115

Manufactured by a Russian company for small passenger cars. Can be used to service vehicles with low clearance. The pick-up height is 105 mm, the working stroke is 280 mm. The frame is made of durable steel with a paint coating to protect it from rust. The screw drive is made of high quality and does not require complex maintenance. The design is reliable and can easily withstand static loads.

You can use a ratchet wrench to rotate it. The tool is included, but you can use any option that is convenient to work with. When folded, it is small in size, which makes storage convenient.

Advantages:

Low price;
Unpretentiousness to operating conditions;
Wear-resistant transmission;
Convenient to operate with a key.

Flaws:

No case or storage bag.

Top best jacks

In terms of price and quality ratio, the Sorokin HobbyLine Jack 3.520 with a lifting capacity of 2 tons can be put in first place. It is ideal for ordinary passenger cars. Having the smallest weight and dimensions, it will be a good helper in a difficult situation on the road. Matrix Master 51028 also has many positive reviews. Users note good endurance and long-term operation of the tool. The rating of 3-ton rolling jacks is headed by Airline AJ-3F-390P. Although reviews regarding this model are very contradictory. But if we compare the price-quality ratio, then this model fully lives up to expectations.

You might be interested in DIY methods for pumping a hydraulic jack

Quality tool

Despite the variety of offers, you can still choose a high-quality and inexpensive tool. To get a clearer idea of the product, you can read reviews about it or watch a suitable video.

The best rack and pinion car jacks

Rack and pinion lifts have a high lifting height, which allows you to buy equipment for servicing SUVs, pickups, and trucks. At all stages of work, the user applies the same force. The devices are mechanical, unpretentious, and can be used at low temperatures. In terms of efficiency, lever models are comparable to hydraulic jacks.

Bison Hi-jack 43045-3-135_z01

Designed for commercial vehicles, trucks, heavy SUVs. The equipment can be used as a hand winch. With a pick-up of 125 mm, the working stroke is 1205 mm. The large operating range makes the equipment universal.

Good stability is ensured by a large sole area and a heavy cast iron body. The rack is made of durable tool steel. Powder paint is used to protect against corrosion. The mechanism is driven by a long handle: a large lever increases the pace of work and allows you to spend less physical effort.

Advantages:

Easy to maintain;
Long service life;
Convenient sizes for storage;
High strength;
Wear-resistant rail.

Flaws:

High price.

Kraton HJ-2.7-1200 2 30 03 002

The lift of the Russian company is designed for commercial vehicles, trucks, lifting machine tools, and construction work. The design allows you to work in any plane. The body and rack are made of high-quality steel; the powder coating reliably protects the instrument from corrosion.

With a low pick-up height, a large working stroke is 891 mm. Wide support and heavy weight make the equipment stable during operation. The designers have provided an elongated handle with a rubberized handle to reduce physical effort when lifting. The simple design of the mechanism makes operation simple under any external conditions.

Advantages:

Low price;
Minimum maintenance costs;
High lifting speed;
Rack made of wear-resistant steel.

Flaws:

No case.

Which car jack is better?

Roll-on lifts have noticeable advantages, but not every car has room for permanent storage of this equipment. Screw-shaped, diamond-shaped jacks easily cope with servicing small cars, but cause a lot of problems for owners of crossovers and are completely useless when replacing SUV wheels. There are no universal models, so the VyborExperta.ru team recommends the following tool, taking into account the characteristics of the cars:

Kraft KT 820005 – for servicing SUVs;
Matrix 51018 – for crossover owners;
Stels 51131 – for regular work;
Autoprofi DVB-20 Lo – for a small crossover;
Sparta Compact 50333 – for commercial vehicles;
Bison Hi-jack 43045-3-135_z01 – for trucks;
A2DM 102018 is the best replacement for the standard device of a small sedan;
Sorokin 3.693 is an inflatable model for extreme sports enthusiasts.

The correct choice of equipment is the key to effective repairs in difficult situations. Only those models that provide quick lifting and reliable service are worthy of the title of best tool in their category.

Best bottle car jacks

If you need to buy a car jack with good lifting capacity at a low price, most car owners choose bottle models. This technique is characterized by good stability despite its small size and simple transfer of physical effort using a lever. The equipment has a high load capacity, but requires periodic scheduled maintenance. VyborExperta.ru tested the effectiveness of 7 models and recommends 3 brands that have a strong, reliable design and do not fail in an emergency.

Sparta Compact 50333

The German development attracts with its versatility: it can be used for car repairs, construction and installation work. The equipment has good load capacity and can easily cope with heavy SUVs and commercial vehicles. Stable design makes maintenance safe. The body is made of steel, reliably protected from corrosion by powder coating.

For operation, a prefabricated handle is designed, which is used as a lever. The pick-up height of 180 mm makes the model relevant for large crossovers, pickups, and jeeps. A high-quality polished rod has a long service life.

Advantages:

Small sizes;
Low price;
Wide base;
Long service life.

Flaws:

No case.

Sorokin 3.560

Featuring good ergonomics, the electric car jack is designed for passenger cars and commercial vehicles. Operates from a 12 V network and has convenient controls. The electro-hydraulic lift is equipped with a 3.5 m cable with a connector for a standard cigarette lighter. 15A fuses are used for overload protection.

It has a pick-up height of 155 mm, the working stroke reaches 235 mm. A manual valve is installed to relieve pressure. The hydraulic oil used allows the equipment to be operated in a temperature range from -15 to +50 degrees. The body is made of durable metal and is well protected from rust. Can be used at service stations.

Advantages:

Illumination of the installation site;
Light weight;
Good stability;
Low noise level;
Good equipment.

Flaws:

High price;
No case.

Kraftool Double Ram 43463-2

German bottle lifter with two-rod design. It is distinguished by high quality workmanship and unnoticeable welds. The lift is 170 mm, the working stroke is increased to 210 mm due to design features. Recommended for car maintenance, installation or general construction work.

The body is made of steel with a special coating that protects against rust through. The movement is driven by a handle that has a folding design. Takes up little space in the trunk.

Advantages:

Good quality cuffs;
Smooth rise;
Good stability;
Little physical effort during work;
Low price.

Flaws:

Not detected.