What are the characteristics of the Gysmi inverter?

Despite the fact that each Gysmi welding inverter is manufactured in Europe (in France), the cost of such equipment is quite affordable. By purchasing this device, every specialist or home craftsman can count on receiving products of truly European quality.

Welding inverters Gysmi

Gysmi inverters - pros and cons of purchasing units of this brand

At first, domestic consumers reacted with great delight to the appearance of welding equipment under the “GYS” brand in our specialized stores. They were impressed by the fact that it was produced using an innovative technology called “IMS”.

Its essence is that any welding machine of the described brand had a single board located on the massive aluminum inverter housing.

Due to this, the company’s welding equipment is a compact unit with an ideal (without exaggeration) ratio of geometric dimensions, weight and productivity.

The boards are directly mounted on the device in complex high-tech production conditions, where all assembly operations are performed without human intervention by robotic machines.

Electronic boards have a high level of reliability, each of their component elements is repeatedly checked, thanks to which the quality of the finished GYS product can be considered impeccable. But, as you yourself understand, during operation any equipment breaks down.

This is where the main drawback of the welding inverters under consideration lies.

The fact is that if a high-tech board fails (and this will happen sooner or later), it is impossible to repair it.

There is only one way out - to purchase a new board, install it on the device and continue to use it again. The trouble is that the cost of this very electronic board is comparable to the price of the entire welding inverter. In fact, when it breaks down, it is not a question of repairing existing equipment, but of buying a new one.

By and large, this would not be a big problem if the GYS equipment worked without failures for a long time. But in recent years, the company has tried to reduce the cost of its units as much as possible, meeting the wishes of customers. The result of this decline was a decrease in product quality. It began to break down much more often.

If you have your eye on, for example, the Gysmi 161, which is popular among Russian welders, or the equally popular Gysmi 131, be prepared for another problem associated with their operation. Their efficiency is not as high as consumers would like.

At the highest permissible loads, the break time during welding for them is at least 70 percent, and at nominal loads you can use, say, the Gysmi 165 inverter, no more than half the welding cycle.

This device makes it possible to carry out manual arc welding using direct current. Gysmi 161 works with welding rods with a cross-section of 1.6–4 millimeters. The unit is characterized by stable operation during power surges, low electrical energy consumption, and compact dimensions. These factors determined the popularity of Gysmi 161.

The inverter design has a special mechanism with a built-in fan that protects the unit from thermal overloads. It is especially in demand among inexperienced welders who experience difficulties when operating other welding installations.

With Gysmi 161 you will not have problems with arc ignition and sticking of welding rods, since the inverter has the “HOT START” and “ANTISTICKING” functions.

Another popular model in Russia from French engineers is a device with a microprocessor for performing welding operations using TIG and MMA technologies.

Gysmi 165 (now sold in a new modification - Gysmi e160) has all the modern functions that facilitate the welding process. The highlight of the Gysmi e160 is that the “Hot Start” function in it is not fixed, but adjustable.

If you consider yourself an experienced welder, the Gysmi 165 inverter will be the best unit for you.

Below we present its key technical parameters:

• dimensions – 12.5x28x20 cm;
• supply voltage – from 190 to 260 V;
• idle (voltage) – 72 V;
• primary current (highest) – 23.6 A (when argon-arc welding), 33.5 A (when using melting rods);
• unit weight – about 4.6 kg.

The welding current for Gysmi 165 is 10–160 A, regardless of the mode used. I would also like to note the presence on the front panel of the Gysmi e160 of a digital display on which you can observe the (changeable) parameters of the welding process. This monitor simplifies the operation of the welding installation.

Thanks to this, the Gysmi e160 can be easily handled by both a true professional in his field and a green beginner mastering the intricacies of modern welding.

This device is lightweight (less than three kilograms) and is optimal for home use. It uses electrodes with a cross-section of no more than 3.25 mm, making it possible for even a person with minimal training to carry out manual arc welding, while guaranteeing high quality of the welding process.

Gysmi 131 is a functional unit that you can use from time to time, performing simple welding of metal sheets and products.

Characteristics of the Gysmi 165 inverter

The Gysmi 165 welding inverter, popular in our country, which is now available in a new modification (E 160), has the following feature: its electrical circuit is supplemented with a microprocessor that allows welding using both TIG and MMA technology. As befits a modern welding machine, the Gysmi 165 model inverter has all the innovative options that make working with it much easier and allow you to obtain high-quality and reliable welded joints.

Welding inverter Gysmi 165 complete with storage case

Another notable feature of the inverter of this model is that the parameters of the option known as “Hot Start” can be adjusted at your discretion. The device in question, which has received many positive reviews from experts, has the following technical characteristics.

• The strength of the welding current, regardless of the operating mode used, can be adjusted in the range of 10–160 A.
• The inverter can operate on voltage in the range of 190–260 V.
• Open circuit voltage – 72 V.
• The current strength on the primary winding of the device when welding using manual arc technology is 33.5 A, when welding in a protective argon environment is 23.6 A.
• The dimensions of the device are 12.5x28x20 cm.
• Inverter weight – 4.6 kg.

Purpose of controls and displays

The presence of a digital display on its front panel greatly facilitates the work on such a machine: you can not only quickly set the required welding process modes, but also control them. How convenient such an inverter is to use is evidenced not only by the reviews of professional welders, but also by the impressions of those who are just learning the basics of this profession.

Gysmi welding machine

The Gysmi welding machine has a long history, as the brand belongs to a French company founded back in the 60s. Most of the time, the company focused exclusively on internal needs. Relatively recently, TM entered the markets of other countries.

At the time of their appearance, inverters became popular and widespread in our country, but after a certain period of their use, the situation turned out to be not so clear, since not only the advantages of the devices, but also significant shortcomings became noticeable.

Advantages and disadvantages

When it entered the market, the Gusmi welding machine had several advantages that attracted the attention of users. Among all the general positive aspects, it is worth highlighting the following:

• for production, IMS technology, innovative at that time, was used, which made it possible to obtain equipment of higher quality;
• original design, different from ordinary models of welding machines from other manufacturers;
• well-thought-out and well-functioning cooling system;
• a reliable housing that protects the internal part of the equipment from impacts and other mechanical damage;
• convenient adjustment of parameters;
• Some models included plastic cases for storing accessories.

Subsequently, some craftsmen began to notice that the welding inverter has serious negative aspects. These include:

• complexity and high cost of repairs;
• the fastening system of some components leads to the fact that they are poorly resistant to shock, despite the protected housing;
• the price does not always correspond to the quality.

Important! The unique production system possessed by the Gys welding inverter involves the arrangement of all components of the device on one board. The same board is connected only to the case, which saves space and maintains high performance.

Functionality

Gysmi welding inverters are in the middle price category, and here you can find a considerable number of models with a large power reserve, which makes them closer to the professional field of operation. The main functional capabilities of the technology include:

• hot start – ensures easy ignition of the arc during the start of welding work;
• arc forcing – maintains stable parameters and does not allow the arc to die out even when the electrode is separated from the metal;
• anti-sticking – turns off when the electrode sticks and a short circuit occurs.

Unlike other brands, where these functions are also present, here you can adjust their intensity and parameter values, even turning them off completely.

Model range and technical characteristics

The welding machine (inverter) Gysmi 161 is a compact device that has excellent protection against power surges. According to the rating, it can withstand a surge of up to 400 V.

There is also protection for connection from generators, since in this case the power supply becomes unstable. The device has all the necessary additional functions that greatly facilitate the work of novice welders.

The relatively low power allows you to cook with 4 mm electrodes, which is quite enough for home work.

Welding machine Gysmi 161

The Gysmi 165 welding machine can be used for welding structural and stainless steels, cast iron, copper and other metals.

One of the features is the ability to cook with infusible electrodes in a protective gas environment. On average, it can withstand about 15% energy fluctuations.

All other functions have additional parameter adjustments. The voltage can be increased to a maximum of 60% during a hot start.

Welding machine Gysmi 165

The Gysmi 80p welding machine has microprocessor control. It has unique arc characteristics. This is one of the first devices in the line of this brand. It is relatively low-power and can work with electrodes with a diameter of 2.5 mm.

The weight of the device is small, so with equipment weighing only 2.5 kg you can move around without problems, work at heights, etc. Compactness is the main advantage of the model, since all other parameters are somewhat inferior to larger-scale analogues.

Advantages and disadvantages

When it entered the market, the Gusmi welding machine had several advantages that attracted the attention of users. Among all the general positive aspects, it is worth highlighting the following:

• for production, IMS technology, innovative at that time, was used, which made it possible to obtain equipment of higher quality;
• original design, different from ordinary models of welding machines from other manufacturers;
• well-thought-out and well-functioning cooling system;
• a reliable housing that protects the internal part of the equipment from impacts and other mechanical damage;
• convenient adjustment of parameters;
• Some models included plastic cases for storing accessories.

Subsequently, some craftsmen began to notice that the welding inverter has serious negative aspects. These include:

• complexity and high cost of repairs;
• the fastening system of some components leads to the fact that they are poorly resistant to shock, despite the protected housing;
• the price does not always correspond to the quality.

Important!

The unique production system possessed by the Gys welding inverter involves the arrangement of all components of the device on one board. The same board is connected only to the case, which saves space and maintains high performance.

Welding inverter Gysmi 161 for $200

Most often in stores you will notice either very cheap welding inverters or very expensive ones.

Sellers put them in prominent places, attaching a flashy price tag in an attempt to attract the novice or professional. In such a situation, inverters from the middle price category disappear from view.

Those devices that are so loved by practicing welders, novice craftsmen and simply those who are looking for a good device for country homemade projects.

We will tell you more about such devices. And in this article, we’ll start with the GYSMI 161 welding inverter. The Gysmi 161 inverter is an unpretentious and well-built device priced up to $250 from a French manufacturer.

general description

Welding inverters GYS GYSMI (as they are often called “gusmi”) are unpretentious devices based on microprocessors. They are designed for MMA welding, also known as manual arc welding. The Gysmi 161 model is equipped with all the functions that will help simplify your work and make your welding more productive. There is anti-sticking, arc force and hot start.

The Gysmi welding inverter model 161 can be used in conjunction with coated electrodes with a diameter of up to 4 mm. And the minimum diameter is 1.6 mm. The main advantages of this inverter are compactness, low power consumption and affordable price. By the way, this model is able to work even with unstable voltage in the electrical network. This advantage will be especially appreciated by summer residents.

The Gysmi welding machine can operate without problems at voltages from 170V to 260V. So you don't need to worry about it. The inverter is equipped with an air cooling system and is protected from overheating. But we still recommend monitoring this yourself without overloading the device. Of the 10 minutes of welding work, cook for 5 minutes, and let the inverter cool for the remaining 5.

The equipment is standard. In the box along with the inverter you will find a convenient case made of hard plastic. There is also a network cable with a regular Euro plug, two welding cables with a clamp and holder. In addition, in the box you will find a strap for transporting the device on your shoulder and instructions.

Characteristics

The GYS MI 161 welding inverter has a completely standard set of characteristics for this class of devices. It operates from a regular 220V outlet (unstable voltage is allowed) and is capable of delivering from 10 to 160 Amperes.

For welding, you can use electrodes with a diameter from 1.6 mm to 4 mm. This is more than enough for household welding. The device is protected from drops of water, but does not react well to dust and high humidity. So pay attention to storing it properly.

The Gysmi 161 inverter is very compact and weighs only 4 kg. You can take it with you to your dacha on public transport, and take it back to your apartment for the winter. The manufacturer provides a 1 year warranty from the date of purchase.

Welding inverter GYSMI 161 - is it worth taking, advantages and disadvantages, main characteristics

Are you thinking about buying an inverter? In the store, trying to attract the attention of both non-professionals and specialists, sellers, with the help of bright price tags and advantageous retail space, display expensive or suspiciously cheap welding machines.

In this way, they distract the buyer from inverters at an average cost, which are preferred by: professional welders, non-professionals, and those who need an inverter for homemade projects in the country.

In our article we would like to draw your attention specifically to a well-assembled French-made model: a welding inverter model GYSMI 161 costing up to $250.

general description

The unpretentious welding machine GY GYSMI (popularly known as “gusmi”) with microprocessors at its core can be used for both manual arc welding and MMA welding.

To simplify your welding work, the GYSMI 161 welding device also has the following functions:

• hot start (Hotstart);
• “anti-sticking” (anti-sticking);
• Arc force;
• equipped with overheating protection;
• air cooling system.

Despite the fact that at a voltage of 170 - 260 V GYSMI operates without any problems, you should not put a large load on the inverter; we advise you to monitor this yourself.

For example: for 10 minutes of welding work, operate the inverter for 5 minutes, and allow the machine to cool for the remaining 5 minutes. The contents in the box are standard and include:

• inverter;
• a travel bag made of thick plastic;
• network cable with European standard plug;
• for transportation on the shoulder-strap;
• welding cable with clamp and holder (2 pcs);
• instructions.

Characteristics

As for the standard set of characteristics: even taking into account the unstable voltage, the GYS MI 161 device is capable of delivering from 10 to 160 Amps from a simple 220 V outlet, which is acceptable for this level of welding machines.

For household welding, it is enough to use electrodes of 1.6 - 4 mm. It is worth following the storage rules, since the inverter is not afraid of water drops, but it reacts poorly to high humidity and dust.

The GYS MI 161 device is not large (weighs only 4 kg), you can take it to the dacha even using public transport, and take it home during the cold season. The manufacturer provides a 1 year warranty from the date of purchase. Depending on the current used for cooking, the turn-on time of the device is determined.

For example, welding with a maximum current of 160A will show a low indicator, since it will lead to the fact that the device can operate continuously at 14% of the entire welding cycle. That is, for 10 minutes of cooking, the welding work will be about one and a half minutes.

It is worth considering that with a current of 85 Amps, the device will show the inverter operating time of 6 out of 10 minutes (which is a standard indicator for this type of device).

After all, at the dacha or if you are not a professional, then most likely you will not use a welding machine at maximum current. Plus, there is also a diagram of the GYS MI 161 welding machine on the Internet; in case of a breakdown, you can repair it yourself.