Do-it-yourself ax handle - step-by-step instructions and photos

How to select and prepare wood?

Many jobs are impossible without a well-sharpened and strong axe. This tool is often needed in both household and larger-scale work. In retail outlets you can find many different models of such tools, because there are quite a lot of types of axes themselves. It is possible to choose the ideal option in accordance with any requirements.

But there are also cases when the consumer could not find a suitable tool for himself. Many people in such situations find a simple way out - they make an ax themselves. For a tool to be of high quality, reliable and durable, it must consist of good elements. So, to create an ax handle, it is very important to choose the right material.

Not every type of wood is suitable for creating this ax part. It is believed that a true master will go around the entire forest before he finds the very tree from which he can make an axe. In most cases, this element of the ax is constructed from the root section of a birch tree, and even better, if you use the growths that are present on its trunk. These parts are distinguished by a very dense and curled structure.

Birch is not the only tree that can make a good ax handle. Instead, it is permissible to refer to trees such as oak, maple, acacia, ash and other deciduous trees that are classified as hardwoods. According to experienced craftsmen, beech, oak, larch, walnut and elm produce the most reliable, comfortable and durable high-quality handles. But it’s not enough to find the ideal material for making an axe. It is still necessary to properly prepare it for the upcoming work.

The workpieces must be thoroughly dried. This is done only under natural conditions, and it often takes a lot of time - on average 3-4 years, and better yet longer (5 years will be enough). Wood should be dried exclusively in a dark and dry place with good ventilation. Precipitation, dampness and water should not penetrate into the space where natural material will be prepared. Otherwise, such drying simply won’t do any good, and you won’t be able to make a good axe.

What wood is suitable for an ax handle?

In general, hardwood is most suitable for making an ax handle. Hardwoods, but of course not all of them. Ax handles are usually made from the following species: ash, maple, birch, beech, oak. Let's talk about the nuances of each breed, in terms of its use for an ax handle

Beech wood is easy to work with. But despite this, it is very hard and durable. But beech wood has a negative point in using it as an axe. This is because beech wood tends to absorb moisture strongly. And this has a very negative effect on the wear resistance of the tool.

An oak ax handle is a standard of reliability and strength - oak wood is very resistant to stress. It is highly resistant to pests, moisture and fungi. What cannot be ignored. But there is a fly in the ointment here too - the weight of oak wood.

Oak wood ax handle

Oak wood is heavy and hard, which in general, when working with an ax, has a strong impact on the hand.

We can say that ash wood almost perfectly meets the requirements for an ax handle. Ash has high hardness, density and strength.

Ash wood ax handle

The high density of ash wood makes it very resistant to high impact loads. Which is very important for an ax handle, which experiences enormous loads when working with an axe.

And despite its excellent characteristics, ash can be found in any hardware store or market. Moreover, the cost of ash wood is not the highest, something in the middle price category

Birch is often used to make ax handles. Most often, on the shelves of shops and markets you can see axes with birch handles. But this is not the best option for an axe.

The popularity of birch handles is based on the low cost of wood and the ease of processing birch.

Birch wood ax handle

Birch is susceptible to rotting, and its hardness is low. Low hardness becomes higher with proper processing. Proper processing of such material improves the properties of wood. And makes it quite suitable for small household hatchets.

Ax handles are often made from maple wood. Maple is resilient and durable. And also easy to process. Among other things, maple wood has a beautiful color and soft structure.

This unusual name hides an American walnut that grows in Canadian forests. For the manufacture of an ax handle, this is the best option, successfully combining strength, elasticity and durability. However, only American and Canadian loggers can truly appreciate these benefits.

Important nuances

The strength and durability of the ax is determined by the resistance of the wood to dynamic shock loads. The reasons for premature breakage of the handle look like this:

the use of soft wood reduces the service life of the ax by almost 2 times;
poor drying - the blade landing site begins to become soaked;
low density of the ax head - the blade walks along the surface, eventually breaking the handle.

It should be clarified that a properly made handle can last for several years without requiring repairs.

How to make an ax from wood

How to make an ax from wood? To do this, you need to prepare a wedge-shaped blank from which you will need to make a blade. On the surface of the workpiece, you need to draw the outline of the future toy with a marker. Excess material can be removed using an abrasive sharpener.

At the next stage, on the end surface of the workpiece it is necessary to mark the outline of the hole for the ax handle. The technology for obtaining the handle is described above, but it is necessary to correct the dimensions.

Children's wooden ax

Bringing the blade and handle to the required shape can be done using a sharpener or file. In a fairly short time, the children's ax will be ready.

Wood harvesting begins in autumn

Dry in a dark place. Before use, wood must be stored for about one year, or better yet, five.

It is not advisable to use felled wood as it will dry out over time and will not stay in the eye.

Service life of the ax

The durability of a properly made ax is determined by the resistance of the wood to impact and compression. The part of the ax located in the eye experiences very significant loads; over time, it can become wrinkled and the ax head becomes loose. The service life is determined by the type of wood (the harder the better), drying (a poorly dried ax handle will “get wet” very quickly), and the density of the attachment: precise fitting and tight attachment (by blows or pressing) significantly increase durability. Properly made axes can work under heavy loads for years without requiring repairs. If a properly made and mounted ax handle becomes loose, it can be repaired. In the case of a direct attachment (when the ax is placed on top of the tapering end of the ax handle and then wedged), the ax should be set back and an additional wedge made of hardwood should be hammered in. It is also possible to use a flat or round metal wedge. When the ax is mounted in reverse (the ax handle is passed through a cone-shaped eyelet from top to bottom), loosening does not occur, since during operation the loads are directed towards the expanding end of the ax handle and the ax is only fitted more tightly.

READ Making a boat out of plywood with your own hands

Making an ax

There are various methods in the production of pens. The choice is influenced by:

skills;
tool;
material;
size;
form.

The handle of sledgehammers and cleavers looks like a straight stick, while in other varieties it has a curved shape.

Increased wear resistance is influenced by:

rock strength;
correct placement of fibers.

The fibers are located along the handle. The oblique texture contributes to breakage during operation and drying out.

Drawing with dimensions of the axe.

Manufacturing methods

For an ordinary person, the most common use of an ax is when working in a summer cottage. Here, along with the work inherent in such a tool, not very qualified workers are used for various jobs. Therefore, axes, as a rule, do not withstand prolonged use, and they have to be changed quite often. The most suitable material for the handle is birch. It is durable, relatively light and smooth material to work with. For zealous owners, it will be useful to place birch bars to dry. Birch should be dried for a long time, at least 3-5 years, and always out of exposure to sunlight. To make a good ax handle, you will need well-dried birch. Otherwise, it will dry out in the ax itself, the handle will begin to dangle, which can lead to significant inconvenience in work and injury.

There are several different ways to make an ax handle correctly. But all of them can be divided depending on technological equipment:

Using electric woodworking mechanisms (circular saw, planer, various types of sanding).
Manually from ready-made boards using a plane, rasp, and so on.
Handmade from birch logs.
With a minimum of tools.

Tools and materials

Before starting work, you need to prepare parts and equipment for making an ax at home or in an industrial environment. The main materials are wood for the handle and the chopping head. In addition to these, you may need:

antiseptics that will protect the ax handle from rotting;
twine with a diameter of 5-8 mm;
medium and fine grit sandpaper;
cutting and polishing wheels for an angle grinder;
abrasive materials.

The surface of the handle can be varnished. It will protect the material from water ingress and swelling.

To make a wooden ax with your own hands, you will need hand or mechanical plumbing and carpentry tools. You should prepare:

Grinder with abrasive wheels. It is shaped like a metal hatchet head.
Jigsaw with wood saw.
Sanding machine or grinder.
Set of files, rasps.
Manual milling machine.

Handle attachment

To figure out how to properly attach an ax to an ax handle, you need to decide on the attachment method. There are several of them and they depend on professional skill, experience and material of the product. It will take a little time, some carpentry tools and wedges.

Methods for attaching an ax:

Welding. This method is suitable for axes with a metal handle.
Gluing. The ax butt and ax handle are glued together using epoxy glue in a special chamber.
Wedging - this method is most preferable for carrying out the procedure at home. The ax needs to be put on the handle and wedged.

Types of axes

There are several types of axes, and each has its own purpose. Professionals distinguish this tool by the width of the butt, which can be wide, medium and narrow. At the same time, some use it for universal work, others for cutting wood, and some varieties are used for neat carpentry work.

Main types of axes:

cleavers;
for felling forests;
construction;
tourist.

Within each of these groups, there are various tool options designed for narrow-profile or other special work.

A striking example of this is a fire axe. Its design is no different from others, but opposite the blade it has a pointed pickaxe. With its help, you can hook heavy objects, secure yourself on the roof, or break door locks.

A little about sizes and shapes

Each master made an ax with his own hands, focusing on his height and specific application. It is no secret that a tool designed for chopping wood will be somewhat different from a similar product intended for cutting down trees. In this case, a small carpenter's hatchet for small carpentry work will be the exact opposite of the two categories listed above.

Despite this, a professional ax with a wooden handle always consists of three main parts:

working part made of metal with a sharpened front part;
ax handle - a handle made of wood;
wedge - a spacer element that connects parts of a structure together.

When making it yourself, special attention is paid to the metal part, otherwise the tool simply will not cope with its main function. Here, not only the shape and material are taken into account, but also the aspect ratio and sharpening angle.

Modern axes are usually made from medium-alloy tool steel, which has been heat-treated and hardened.

The blade shape is selected depending on the application. For example, products designed for arborists are often used for cutting down tree trunks and removing large limbs. This kind of work requires a great depth of penetration, so the shape of the ax should be wedge-shaped. Cleavers that are used for chopping wood have a similar shape, but have thicker “cheeks” and a sharper sharpening angle.

The length and size of the ax directly depend on the impact loads. If significant impact force is required, the handle is made longer to provide a larger swing. Here the dimensions are 700-900 mm. The length of the handles of log axes (carpentry tools) usually does not exceed 500 mm; a good cleaver is attached to a shaft of about 800 mm.

The shape of the ax should provide a comfortable grip, so the middle part is always made curved, the seat and shank have thickenings. The blade angle usually varies between 70-90 degrees.

Despite this, a professional ax with a wooden handle always consists of three main parts:

working part made of metal with a sharpened front part;
ax handle - a handle made of wood;
wedge - a spacer element that connects parts of a structure together.

Modern axes are usually made from medium-alloy tool steel, which has been heat-treated and hardened.

READ How to grow cedar from pine nuts?

The shape of the ax should provide a comfortable grip, so the middle part is always made curved, the seat and shank have thickenings. The blade angle usually varies between 70-90 degrees.

The importance of the handle

You can choose the optimal length of the ax based on the height of the master and the force of the blow. Strength, in turn, directly depends on the length, so when working with a large ax, it will be easier to chop logs of firewood.

Before making a choice, you should decide on the desired result:

heavy version of the tool (total weight 1 kg - 1.4 kg, handle length from 55 to 65 cm);
lightweight version (weight 0.8 kg-1 kg, with a length from 40 to 60 cm).

The quality of the wood from which the ax handle will be made is of great importance. Not every type of wood is suitable for manufacturing. Often, birch is used for these purposes (parts located near the roots or stem growths).

There are also handles made of oak, acacia, maple and other hardwoods. All selected workpieces require long-term drying.

After the wooden blank has dried well, the contours of the handle are drawn on it, according to a pre-made template. To avoid hand slipping during operation and to increase the convenience of the ax, it is necessary to provide a thickening at the end of the handle.

A knife, chisel, or electric jigsaw will help you cut out the outline.

After trying on the ax head and not finding any signs of a loose fit of the parts, you can safely continue improving the ax handle. Glass will help you scrape the tool, and sandpaper will be useful for grinding.

Technological production of an ax handle

First of all, the necessary blank is cut out on woodworking machines. All its dimensions (width, thickness and length) are made with a small margin for further adjustment.

The thickness and width are determined by the size of the ax's entrance hole, which is called the eye and is located at the bottom. It must be remembered that the upper outlet hole is much wider than the lower one, and they should not be confused when taking measurements.

For the convenience of further processing, it is advisable to plan the workpiece on a planing machine in order to make its cross-section close to a triangular shape with an acute angle at the bottom of the future ax handle. Using a cardboard template, a drawing of an ax of the chosen shape is applied to the workpiece. A template can be made by making a drawing according to the dimensions of an old broken tool, or you can find a suitable shape of an ax in specialized literature or on the Internet. It is most convenient to cut rounded areas using an electric jigsaw. Next, smooth out all the corners using a wide chisel and pre-grind the product. It is not worth processing it completely to working condition, because if it is directly connected to the metal part of the tool, when significant forces and impacts are applied, the wood may split, and all the final finishing work will be done in vain.

Mechanical grinding should be done on a flat grinding wheel. Using a regular stone sharpening disc is not effective. It is better to make a special disk, with the same hole in the center as the corresponding sharpening stone.

It is better to use the material for the circle from hard electrically insulating plastic, at least 5 mm thick. Sandpaper is glued onto it using PVA glue. You should know that you should only use waterproof paper. A simple one will quickly break. In addition, a circle covered with waterproof sandpaper can be washed to remove wood dust with hot water. Therefore, if such a circle is made from plywood, then washing it will be problematic. Plywood can become deformed when exposed to water.

On such a wheel it will be convenient to grind the smooth and convex parts of the axe, especially the part that is inserted inside the ax. This must be done very evenly so as not to weaken the thickness of the wooden part.

For sanding internal curves, it is good to have a vertical sander. You can also make equipment for it yourself. To do this, you will need to turn a wooden cylinder on a lathe with a through internal hole corresponding to the shaft of the engine being used, and paste it on the outside with waterproof sandpaper.

The finished cylinder should be tightly placed on the shaft of a vertically mounted engine. For grinding the ax itself, the diameter of the cylinder is not so important, but the thickness of the walls from the inner hole to the outer surface should be quite massive, at least 10-15 mm.

Preparing the template

When you have ready-made material, you can begin to create the ax itself. To do this, they think over and make a sketch of the handle, thanks to which the manufacturing process of the product in question is facilitated. The shape of the ax is determined by the type of tool. If a handle is required for a light ax weighing 0.8-1 kg, then its length is 0.4-0.6 m. The length of heavier ones can reach 0.6-0.9 m. Axes are classified according to their purpose:

carpentry;
lumberjacks;
loppers;
cleavers;
butcher's

Based on the purpose of the tool, the length of the ax will depend. When making it, you should adhere to the following rules:

to prevent the ax handle from slipping while working with an axe, the tail should be slightly wider than the handle itself;
the cleaver's ax handle is made 0.75-0.95 m long, while for a carpenter's ax it is 0.5 m long;
10 cm is added to the length of the handle for allowance. This part is cut off after attaching the butt.

The future handle of the desired shape and size is drawn on cardboard, after which the image is transferred to wood and cut out with carpentry tools.

Making your own handle

First, a block of dried lump is made from a thickness of 3–5 mm greater than the width of the mounting hole. The reserve will allow you to later adjust the workpiece in case of mistaken removal of excess wood somewhere. If it is necessary to remove a thick layer, use an ax or a circular saw, then plan the surfaces with a plane, simultaneously leveling the planes.

On the resulting workpiece, mark the outline of the ax handle with the same margin of a few millimeters.

For convenience, the piece of wood is clamped and transverse cuts are made with a hacksaw in increments of 35–40 mm, not reaching the marking line by 2–4 mm.

Next, use an ax or chisel to knock down pieces of wood in small pieces, following the direction of the chip and not allowing it to go deeper than the drawn contour.

The shank is filed perpendicular to the axis of the ax handle to reduce the likelihood of chipping the wooden product.

Having completed the rough processing, mark the dimensions of the mounting hole.

Why find the center at the end of the workpiece and align the tip along it.

The final shapes are given to the workpiece by planing the convex surfaces with a plane, and the sunken parts are selected with a sharp knife.

Working carefully, remove thin shavings and periodically turn the part over to change the direction of the cut. As a result, you get an almost finished ax handle.

Now the upper end of the handle is chamfered for approach.

They try to lightly insert the handle into the eye, after which marks will remain on the wood, showing how much material needs to be removed.

Focusing on these marks, they continue to adjust the axe. Then another test attachment is made to identify areas of chipping.

Subsequent fine-tuning of the handle is carried out with sandpaper, smoothing out all irregularities and bringing the surfaces to a smooth state.

The tip is finally placed on the finished ax handle, ensuring an even fit. The protruding end of the piece of wood is cut off with a saw.

Place the cleaver vertically and hammer in a wedge, the length of which should not exceed the size of the butt to avoid cracking. If the wedge is not completely buried in the wood, the excess is cut off with a hacksaw.

The handle of a firewood cleaver is impregnated with a protective and decorative compound, leaving the surface rough. Do not use varnishes or oil paints that form a glossy finish.

Making your own ax

The tool manufacturing process can be divided into several stages. In order for the instrument to fit well in the hand, serve for a long time and not become dull, it is necessary to carefully and thoroughly perform each of them.

Ax head selection

How long the ax blade will work without sharpening depends on what steel the cutting part of the ax blade is made of. Good tools are made from high carbon steel, which has optimal hardness and toughness.

In the Soviet Union, steel grades U7A, U8, U8A, and U8GA were used to produce axes. The steel grade was stamped on the side of the blade.

To check the head for integrity before purchasing, you can simply hit it with a metal object. A long, ringing sound indicates high-quality hardening of the blade and the absence of internal cavities and cracks in the steel. The hardness of the blade is determined by quietly scratching it with a file. On high-quality hard steel, the needle file leaves small scratches; on soft steel, a notch immediately forms.

When purchasing an ax head, you need to pay attention to the following:

the blade must be of the correct shape, without shells or cracks;
the eye should taper into a small cone;
the butt end must be perpendicular to the blade;
The walls of the butt should not be too thick.

READ How to make a table from epoxy resin with your own hands

On a note! High-quality instruments can be purchased for relatively little money at so-called “flea markets.” They often sell old instruments pulled out of grandfather's closets. By purchasing an old tool and making an ax handle, you can get a high-quality tool for little money.

Making an ax

To ensure that the tool fits well in the hand and is comfortable to work with, carpenters prefer to make an ax handle with their own hands. To make an ax you will need the following tools:

wood hacksaw;
square, pencil, tape measure;
small hatchet;
hacksaw for metal;
blunt knife;
skins of different grain sizes.

Large tool stores sell already made axes. The easiest way is to buy a ready-made pen and create a tool, but a factory product rarely “fits in your hand.” To make your own ax handle, hardwoods are used:

Trees are harvested at the end of autumn, when sap flow stops and the tree becomes dense and dry. A piece of the required length is sawn off from the trunk, split along the fibers and laid to dry. Dry the workpieces in a dry, dark, ventilated place for 3-4 years.

On a note! During drying, wooden blocks can bend, so it is advisable to have a supply of blanks for work.

Before work, they find out the dimensions of the future ax and make a drawing. The length of the ax depends on the length of the master’s hands, the weight and purpose of the tool:

for light carpenter's axes (800-1000 g), the handle length is 40-60 cm;
for heavy two-handed axes (1000-1500 g) – 60-70 cm;
for light cleavers, the length of the handle is 40-45 cm, for heavy ones - 60-80 cm.

You can download a sketch of the drawing from the Internet or take an existing ax and adapt its dimensions to your hand. Several options for drawings of ax handles are shown in the photo below.

Operating procedure:

the workpiece is trimmed with an ax, making a rectangular block;
The contours of the future ax handle are drawn on the plane of the block with a marker. The length of the workpiece should be 5-7 cm longer than the axe. The allowance is necessary for the correct attachment of the ax;
the block is hewn along the contour. Rough processing of wood is carried out with an axe, finishing with a plane or a jamb knife;
the final polishing of the homemade ax handle is carried out with fine-grained sandpaper;
After grinding the ax handle, it is impregnated with linseed oil or natural drying oil to prevent rotting. The liquid is brought to a boil and rubbed into the ax handle. To make a homemade instrument stand out better against the background of grass, a bright acid-colored dye is added to the oil. After drying, the process is repeated until the oil is absorbed into the wood.

Placing an ax on an ax handle

Removal of excess wood from the upper end of the ax handle is carried out carefully, constantly applying the butt of the ax to the workpiece. After the eye is pressed ½ of the way onto the ax handle by hand, planing is stopped. Craftsmen have developed several ways to securely attach an ax head to a handle.

A wedge is used for mounting. It is carved from hardwood. Operating procedure:

the butt of the head is applied to the top of the ax handle and a mark is made;
the ax handle is clamped in a vice. In its upper part, along the fibers, a cut is made with a hacksaw for metal to a depth equal to half the distance to the mark;
A wedge is cut out of hardwood (birch, oak). The thickness of the wedge is 0.5-1 cm, the width is equal to the width of the ax handle, the length is equal to the depth of the cut;
The ax handle is installed vertically, and the ax blade is placed on top of it;
the wedge is moistened with PVA glue and hammered into the slot on the butt with a mallet;
The part of the wedge that does not fit into the slot is cut off.

On a note! Each master wedges his tool in his own way. Some people make two diagonal cuts for two wedges. There is an option for fixing the head with five wedges. To do this, one longitudinal and two transverse cuts are made in the end part of the ax. First, a regular large wide wedge is driven in, then four narrow ones are driven perpendicular to it.

For installation you need gauze or thin calico. Operating procedure:

the upper part of the butt is trimmed until the head begins to fit 2/3 onto the ax handle;
the eyelet is degreased from the inside, wiping with a solvent;
Epoxy glue is applied to the upper part of the butt, wrapped with gauze or a calico rag, and another layer of glue is applied on top;
the ax head is placed on the ax handle. In order for the head to finally settle, it is pressed down on top with a mallet;
The epoxy resin will dry within a day. The remaining fabric and resin are cut off with a knife.

Impregnation of the ax handle and ax attachment

The upper part of the finished handle must be impregnated with a water-repellent composition. There are two options:

drying oil;
linseed oil;
ski resin.

Lubricate the wood with the chosen product and leave it until it dries. The treatment is repeated several more times until the fat is absorbed. Ski resin can penetrate deeper layers of the workpiece, but it is difficult to find in stores. Therefore, the first two options are often used.

Advice. You can add a bright dye to the impregnation agent. This way it will be difficult to lose the finished tool.

The ax attachment to the handle is done as follows:

The ax handle is clamped vertically in a vice.
On the wide upper part a wedge cut is made. The thickness of the wedge should be 5-10 cm, the length should be equal to the depth of the cut, and the width should be the size of the eye.
An ax is placed on the board upside down. Put on the ax handle and tap it on the board, regularly turning the product over.
After the ax handle has entered, a wedge is inserted into the cut and hammered in with a mallet.
They inspect the product well. If any shortcomings are noticed, they are corrected.
Remove any remaining seam allowance and give the final shape to the bottom of the handle. If any roughness is detected, go over it well with sandpaper again.

Watching videos and photographs will help you better understand the manufacturing technique. Making an ax handle with your own hands is more difficult than buying it ready-made. However, if you have the desire and some skills, it is quite possible to get a high-quality tool.

Useful tips and tricks

Please note that the ax handle should be made so that its cross-section has a characteristic oval shape.
Only by observing this condition will you be able to successfully hold it without straining your hand too much. In this case, blows with an ax will be more accurate and easier. It is recommended to make wood blanks for creating an ax handle in late autumn. It is during this period that the movement of sap is reduced to a minimum (almost stops), which means that the tree becomes, as it were, dehydrated. Many inexperienced craftsmen neglect drying wood to build an axe. As a result, this ends up with the handle changing in size, and the metal part with the butt on it holds very poorly. It is permissible to use undried material only in special situations, when the handle needs to be built urgently, and this spare part is made as a temporary one.

When making a brand new ax handle yourself, you need to draw up a detailed drawing/template of the future tool. If you have a very convenient old ax in your arsenal, then you can remove all parameters from it. This will make it much easier and more convenient. Do not rush to turn the cutting edge of the tool. First you need to make sure the metal is sufficiently hard. If it turns out to be too soft, then it will need to be additionally hardened under the influence of high temperatures.

It is very important to use a ready-made ax (both homemade and store-bought) correctly. Experienced craftsmen strongly do not recommend trying to cut various metal parts with such a device.

Even if you plan to cut wood, it is better to make sure that there are no solid particles inside that could harm the tool.

It is strongly recommended not to throw the finished tool onto hard surfaces, especially from a great height. It is not recommended to leave the ax in the open air. Precipitation or aggressive sunlight can negatively affect the quality of the wooden part. Keep this tool in a dark and dry place. Only under this condition will the ax serve you for many years.

If the ax handle fits into the eye too easily, this may indicate that during the work the master made a serious mistake somewhere (most likely in the calculations). An incorrectly prepared template often leads to this problem. In such a situation, even one more installed wedge will not change anything

This is why it is so important to take your time to do all the calculations and make the template correctly

Do not forget to process the wooden ax handle at the end of all work. Please note that processing of this part must be carried out in several approaches. Each new protective layer should be applied only after the previous one has been completely absorbed. This is the only way to reliably protect wood from rotting and destruction. Stock up on enough wood to make an axe. You don’t need to make just one piece - it’s better to build several pieces. This is necessary because during the work some of them may not work out and be rejected. There should always be at least one more blank in stock.

To make an ax handle, you cannot use a wooden block that has a large number of knots. Because of them, noticeable cracks may form on the material. Over time, the branches begin to dry out, and the entire material loses its strength. Making an ax handle yourself is not at all difficult. If you doubt your abilities, are afraid of making a mistake and translating natural material, then it is better to refuse experiments. Buy a ready-made model or contact an experienced craftsman who will make a good tool for you.

To learn how to make an ax handle with your own hands, see the following video.

Making a storage case

When you have made a taiga or other ax from an old one with your own hands, sew a bag for it. It is safe to transport and store tools in it. Make a case from durable material, taking into account the size of the ax. There are three simple options:

You can easily make a case for an ax with your own hands from a bag or an old briefcase. Draw contours with allowances on the material. Then sew the leather with a gypsy needle, to make it easier for you to make stitches, use an awl.
Make your own ax bag from old leather. Craftsmen advise making the case from thick leather. Draw the head on the inside with a pencil, and then cut out two identical parts and sew them together.

Blade

The full size drawing will show the amount of material needed. The blade requires a hard metal, such as a car spring.

We transfer the outline of the drawing to the spring and saw off all the excess. We also make descents using a grinder. It is important here not to overheat the metal so that the edge remains hard and holds an edge well.

Read here: Winter garden in the house - differences from a greenhouse and tips for arranging it yourself