Press mold for technoplankton - drawings and DIY production

Fishing means something different for every lover of this type of recreation, but a fish on a hook in any case is a welcome end to it. In order for the bite to be successful, it is necessary to master a considerable number of subtleties. In particular, study the tastes of fish. For example, silver carp, as well as carp, small carp, carp, bream, roach, crucian carp or catfish can be caught using technoplankton. This is a briquette-barrel of a mixture of nutrients that gradually dissolves in water.

The effectiveness of fishing for technoplankton depends on:

• quality and composition of technoplankton;
• the concentration of nutrients in the cloud of food it produces;
• whether the hooks are located directly in the cloud.

Principle of operation

The basic principle consists of two stages:

1. Once in the water, the technoplankton briquette begins to swell and throw out a bait mixture that resembles real plankton.
2. The fish, attracted by the muddy mixture, swims up to the briquette and gets hooked.

Softening occurs in different time periods: 20 – 180 minutes. Heavy elements settle to the bottom, light ones float to the surface. All this happens quite slowly, so it is accompanied by a cloudy spray.

Advantages:

1. It works not only on silver carp.
2. Unlike other baits, you don’t have to wait all night for the technoplankton to dissolve.
3. Nice smell.

Flaws:

1. Price. Three records - the norm for a fishing trip - cost 200 rubles.
2. Lots of fakes.

Making at home

Despite the fact that today there is a huge selection of all kinds of baits, including for silver carp, many people prefer to make them themselves.

Here are just some of the benefits:

1. Saving money.
2. Ability to create unique recipes.
3. Judging by the observations of fishermen, silver carp are more willing to bite on homemade bait.

Required components:

1. Adhesive and solvent components: maltodextrin, milk powder, starch, powdered sugar.
2. Fillings: flour, ground crackers, ground biscuits.
3. Flavors: vanilla, caramel, honey.

Both at the factory and at home, the production of technoplankton requires the following steps:

1. Preparation of components for the mixture.
2. Transformation of these components into a dough-like mass.
3. Pressing.

Various recipes

We offer several technoplankton recipes for your consideration.

Recipe one:

• 0.5 kg corn flour;
• 0.3 kg mamalyga;
• 0.5 kg semolina;
• 0.3 kg breading;
• 0.3 sugar;

Mix in a bucket and compress.

Recipe two:

• 1 can of condensed milk;
• piece of powder cake 5x5 cm;
• powdered milk;

Condensed milk is poured into the container with the gradual addition of milk powder and cake. Turns into a creamy mass with a mixer. Place in the freezer for 40 minutes. After this, the mass is kneaded like dough.

Gradually add milk powder and cake again. We combine all this with water and bring it to the state of glue. The resulting glue is then passed through a fine sieve until the mixture becomes grainy, like sand.

Recipe three, part 1:

• 200 g sugar;
• 50 g paprika;
• 100 g roasted peanuts;
• 500 g dog food;

Recipe three, part 2:

• 500 g boiled potatoes;
• 1 kg bananas;
• 1 yolk;
• 50 g condensed milk;

First you need to grind the peanuts. Then mix all the ingredients of each part in separate containers. After this, combine and knead, turning into dough.

Recipe four:

• 350 g macadamia;
• 350 g sunflower seeds;
• 150 g millet;
• 150 g rice;
• 1 cup corn;
• 100 g milk powder;
• 1 glass of fruit jelly;

Grind millet, corn, rice and seeds in a coffee grinder. Mix the jelly and dry ingredients with a mixer. Bring to a wet sticky mixture, press, place on a napkin and dry.

Recipe five:

• corn flour – 9 g;
• ground dry spicy herb – 1 g;
• fried wheat bran – 5 g;
• premium corn dextrin – 7 g;
• honey – 3 g;

Everything is thoroughly mixed and compressed by a press with a pressure of over 20 tons. You need to compress the dry mass. The resulting pancake is broken into several parts and pressed again.

The result was high-quality tablets, similar to professional packaging ones. Buoyancy and dissolution rate are acceptable.

Recipe six:

• the basic composition is unchanged: flour, flour, bran - at your discretion;
• grated cucumbers;

The cucumbers are grated and then dried in an electric dryer. After drying, they are passed through a coffee grinder. The result is cucumber flour with a pleasant smell that attracts fish. Mix the dry ingredients with the cucumber, press and the bait is ready.

How to increase your fish catch?

Over 7 years of active fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:

1. Bite activator . This pheromone additive attracts fish most strongly in cold and warm water. Discussion of the bite activator “Hungry Fish”.
2. Increased gear sensitivity. Read the appropriate manuals for your specific type of gear.
3. Pheromone -based lures .

Press for technoplankton

Without a press it is impossible to achieve a high result, since the mass, while in water, must gradually turn into a dust cloud.

Depending on the pressing method, you may need:

• metal or plastic pipe;
• cylinder or plug;
• pin;
• compression device;
• ejector piston;
• microwave;

At first glance, the product may seem technologically complex, but, in fact, anyone can make such bait at home.

There are two pressing methods:

Cold pressing:

1. You will need any metal tube about 90 cm long.
2. You need to select the appropriate cylinder for it.
3. A hole is drilled in its lower part for a pin, which will be attached to the lower plug, threaded onto the lower part of the tube.
4. Pour the mixture to the very top using a watering can and compact it.
5. Separate the mixture from the molds. The result was a small but dense briquette.
6. The mixture placed inside the tube is pressed using a vice or clamp.

Hot pressing:

1. The mixture is placed in a plastic pipe with a tight-fitting stopper.
2. The mixture is compacted by an ejector piston.
3. Place it in the microwave for 30 seconds and set it to maximum power.
4. After extraction, the mixture is compacted again.

Adviсe

1. For maximum water dusting, we recommend adding crushed wine cork to the mixture. The crumbs will float and drag cloudy substances with them.
2. Silver carp loves the smell of honey in summer , and the smell of herbs in autumn and spring. It has also been noted that this fish likes the smell of garlic. These ingredients can be added in small portions to the main components of the mixture.
3. To quickly spray the mixture in water , soda, dry kvass or citric acid are often added to the composition.
4. To prevent the hook from reaching the bottom of the reservoir , you can string foam balls onto it.
5. Silver carp is a strong and large fish. Her weight sometimes exceeds 8 kilograms. Therefore, the reel, fishing line and other gear should be as strong as possible. It is recommended to use a landing net.

Read also: Reviews of vertical vacuum cleaners rating

Now you don’t need to bother yourself with finding ways to catch silver carp. There is only one method, and it is proven - hand-made technoplankton.

A group of fishermen revealed the name of the secret bait during interrogation.

Fishing means something different for every lover of this type of recreation, but a fish on a hook in any case is a welcome end to it. In order for the bite to be successful, it is necessary to master a considerable number of subtleties. In particular, study the tastes of fish. For example, silver carp, as well as carp, small carp, carp, bream, roach, crucian carp or catfish can be caught using technoplankton. This is a briquette-barrel of a mixture of nutrients that gradually dissolves in water.

The effectiveness of fishing for technoplankton depends on:

• quality and composition of technoplankton;
• the concentration of nutrients in the cloud of food it produces;
• whether the hooks are located directly in the cloud.

Secrets of a good catch

Technoplankton is mainly used to catch the following types of fish:

At the same time, it is quite possible to catch a number of other representatives of the underwater world using technoplankton. By making a cylindrical bait of a smaller size, bream, rudd, crucian carp, etc. can easily be used on it.

There are several techniques that allow a fisherman to be more confident that he will not return empty-handed from fishing.

1. Use bite activators when fishing. Many do not trust modern means based on the use of various additives and ready-made mixtures for bait. In practice, their production is based on an analysis of the behavior of fish, its reaction to various components. A striking example is how fishing is activated when using chocolate-flavored bait.
2. Use high-sensitivity equipment when biting fish. When the water is turbulent, or a rather tricky fish is being caught, the fisherman does not always notice the beginning of the bite due to rough equipment. By increasing the sensitivity of the float, the percentage of fish that fall off the hook will drop sharply.
3. Don't use hooks that are too big. Many fishermen, in pursuit of a big catch, rely on a large hook. They believe that small hooks will not be able to hold a large trophy. In fact, this works in reverse. A small hook allows you to catch fish of various sizes. The main thing is that it swallows the bait, that you hook it correctly, and that the fishing line can support the weight of the catch.
4. Pheromones are excellent at stimulating increased activity. Another example of modern developments for fishing. Most importantly, they work great. The main thing is to choose a pheromone that is suitable specifically for the fish that is found in the reservoir. Or the fish you set your sights on when you go fishing.

Operating principle - how technoplankton works

The operating principle of technoplankton is simple. Several hooks suspended in parallel are attached to the hole for the equipment in the briquette. When the inhabitants of a reservoir swim to a cloud of food formed by technoplankton and begin to eat it, they do not see the hooks and swallow them.

The versatility of technoplankton lies in the fact that it is used both for catching fish at the bottom and on the surface with a float:

• For fishing on the bottom, it is better to use instant plankton, which dissolves in about half an hour.
• for float tackle or when there is no bite, it is better to use “long-lasting” types that dissolve for several hours.

They fish with this type of equipment from mid-spring to mid-autumn.

How to use the mold?

At the first stage, prepare the appropriate mixture, mix it thoroughly so that it is as homogeneous as possible.

Then it is poured into the working cylinder, on one side of which a plug should be screwed. When the entire volume is completely filled, the mold is closed with another plug on which the piston is installed and carefully tightened.

If you do this jerkily or apply too much force, this can lead to the product failing : it may burst, in some cases the thread will break.

When the technoplankton is made, a hole is drilled in the central part through which the bait will be put on the hook. Its maximum diameter should be about half a millimeter.

Composition of technoplankton

Technoplankton, which is logical, is made as attractive as possible for fish. The feed ingredients are selected in such a way that they have different specific gravity and buoyancy, respectively, due to which a different level cloud of nutrients appears in the water.

The composition of the finished technoplankton remains with the manufacturer. As for self-made, it is good to use the following ingredients in its composition:

1. Fillers. Everything ground to flour - oatmeal, corn or popcorn, millet, buckwheat, peas (boiled or raw), breadcrumbs, dry cookies.
2. Adhesive components (glue and do not allow to dissolve quickly). Dextrin, maltodextrin, technorapid, milk powder, cream powder, powdered sugar. It is better to use a mixture of maltodextrin and powdered sugar (there is literally a little less powder), rather than them separately.
3. Flavors. Can be used in any form. It is necessary to add such an amount at which the kneading will be obvious and stable. Most of all, fish loves sweet aromas: honey, strawberry, caramel, vanilla, raspberry.
4. Dissolution retardant. Typically starch or rice flour is used.
5. Humidifier. Usually water is added.
6. A bubbling ingredient helps create a geyser effect, which promotes the dissolution of components when placed in water (any effervescent tablets, baking soda + citric acid, dry kvass starter), ratio 1/6 to the total mass.

Recipes for making your own technoplakton

Each fisherman makes the composition in his own way, but there are several of the most popular mixtures, which we will focus on.

Recipe 1:

• 200 grams of corn flour (you can make it from popcorn ground in a coffee grinder);
• 200 grams of wheat flour;
• 300 grams of oatmeal flour;
• 200 grams of semolina flour;
• 150 grams of soda + lemon juice.

All ingredients must be mixed and sprinkled with water. When the dough becomes plastic, it must be placed in a press and made into briquettes, or it can be baked in a microwave oven. The effervescent mixture must be mixed with the mass immediately before pressing.

Recipe 2:

• 0.5 kg of raw semolina;
• 0.5 kg corn flour;
• 300 grams of breadcrumbs;
• 300 grams of mamalyga;
• 300 grams of sugar.

Mix everything until smooth and dilute with honey solution, gradually.

Recipe 3:

• 1 can of condensed milk;
• Powdered milk mixture;
• Powder cake.

Pour a can of condensed milk into a bowl and gradually stir in the dry ingredients until the mixture reaches the consistency of sour cream. Milk and cake should be added in equal quantities. Place this in the freezer for half an hour. Then we take it out and knead it into a tight dough, again adding dry ingredients in equal quantities. Add the bulk part a little at a time; if you add a lot at once, the dough may thicken too quickly. Moisten slightly with water to make it sticky. At the end we pass it through a sieve and press it.

Recipe 4 for feeding on the bottom:

• 0.5 kg of dog food;
• 100 grams of roasted ground peanuts;
• 50 grams of dry sweet pepper;
• 1 cup powdered sugar.

If you want to use this recipe for float fishing, add more dry ingredients.

Recipe 5:

• 250 grams of ready-made fruit jelly;
• 1 tsp. honey;
• Any combination of crushed cereal flakes, breadcrumbs and powdered milk.

Mix the cooled jelly with honey, and then gradually add the dry mixture into it until a moist (but not wet) mixture is formed. Place the compressed barrels on a napkin to dry completely.

Recipe 6:

• 350 g ground flour;
• 350 g raw sunflower seeds;
• 150 grams of wheat flour;
• 150 grams of rice flour;
• 1 cup corn flakes;
• 100 grams of milk powder.

First grind all components to a powder using a coffee grinder, and then mix.

Recipe 7:

• 250 grams of sunflower seeds;
• 150 grams of shortbread cookies with creamy taste;
• 125 grams of dry cream;
• 250 grams of cooked peas;
• 250 grams of fish bait;
• 250 grams of semolina;
• 125 grams of protein powder;
• Flavoring.

Grind all ingredients and mix.

Recipe 8:

• 0.5 kg corn flour;
• 250 g rice flour;
• 250 g pea flour;
• 250 g buckwheat flour;
• 250 g milk baby food with rice;
• 250 grams of raw peanuts;
• 250 g raw sunflower seeds without peel;
• Honey syrup.

Recipe 9:

• 1 tbsp. Sunflower seed;
• 150 grams of dry cookies with vanilla flavor;
• 250 grams of chopped popcorn;
• 250 grams of semolina;
• 250 grams of corn flour;
• 250 grams of milk powder;
• 125 grams of cucumber flour.

To make cucumber flour, you need to grate the cucumber, dry it and then grind it. The flour has a fairly strong aroma, which attracts silver carp well.

Recipe 10:

• 4 parts flour for hominy;
• 4 parts millet flour;
• 1 part rice flour;
• 1 part milk powder;
• Vanilla flavored sugar syrup.

Mix everything, adding syrup periodically. The total syrup should be added to about 30% of the total mass. Then let the mixture rest for 60 minutes. And at the end, we pass through a coarse sieve, press and dry.

Sugar syrup: 1 part water + 1 part sugar + vanilla, boil everything for 20 minutes and cool. If you need to increase buoyancy, add crushed cork.

How to increase your fish catch?

Over 7 years of active fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:

1. Bite activator . This pheromone additive attracts fish most strongly in cold and warm water. Discussion of the bite activator “Hungry Fish”.
2. Increased gear sensitivity. Read the appropriate manuals for your specific type of gear.
3. Pheromone -based lures .

Cooking recipes

The advantages of making technoplankton at home are:

According to the observations of experienced fishermen, some types of fish are much more willing to bite on homemade bait.

Each fisherman has his own special recipe, which he considers most effective. But there are compositions that are recognized as the most popular.

Recipe 1:

All ingredients of the recipe are mixed and moistened with a small amount of water. You need to add enough liquid to form a plastic dough. It is moved into a press and briquettes are made. You can also bake the mixture in the microwave. The effervescent mixture can be mixed into the mass just before pressing.

Recipe 2:

The mixture is stirred until smooth, after which it is gradually diluted with honey solution.

Recipe 3:

Condensed milk is poured into any suitable container and dry ingredients are gradually added. As soon as the mixture reaches the consistency of sour cream, transfer it to the freezer for half an hour. It is important that equal amounts of cake mix and milk powder are added. After 30 minutes, take out the finished dough and knead it, adding dry ingredients again in equal quantities. Bulk ingredients are added little by little to prevent the dough from thickening too quickly. For greater stickiness, moisten it with water. At the end of cooking, pass the dough through a sieve and put it under a press.

Features of preparing technoplankton depending on fishing conditions

When preparing technoplankton, you need to consider what type of fishing you are preparing it for: surface (float) or bottom:

1. To fish on the bottom, you definitely need to add ingredients that will “dust”, components that can float (ground wine cork, bran, etc.).
2. For surface fishing, these should be substances that dissolve gradually and leave a large cloudy trail behind in the water.

Read also: DIY garage antenna

Influence of fishing conditions

To prepare technoplankton recipes with your own hands, you don’t need anything complicated, but it doesn’t hurt to take a number of points into account.
First of all, these are fishing conditions. If you are going to fish on the bottom, you will need substances that dissolve gradually and leave a significant cloudy trace behind. If we are talking about fishing on the bottom, you definitely need to add ingredients that tend to “dust”. These should be components that can float, for example, bran, a wine cork, ground to small particles.

Press for the production of technoplankton

To prepare technoplankton at home, you need to get a press.

There are several types of presses for its manufacture:

1. Pressing with a manual screw press.
2. Squeezing with a jack.
3. Using a high pressure hydraulic press.
4. Pressing in the microwave.

Simple cold pressing mold:

1. Glass for pressing. You need a metal tube 8-10 cm long with a small diameter and a thread at the end for screwing on the plug.
2. Cork. A screw-on plug for water pipes can be used as a plug.
3. Pin for a hole in the tackle. You need to drill a hole in the plug cap and fix a thin but strong pin in it to make a hole in the finished barrel. Screw the plug onto the main tube.
4. Seal. To compact the substance, you need to select a metal cylinder of such a diameter that it fits tightly and easily into the tube. The length of the cylinder should be the same as that of the tube. You can also screw a plug onto the inner piston cylinder from above.

Scheme of work:

1. Screw the plug onto the main tube.
2. Fill the tube with the mixture.
3. Insert the piston.
4. Clamp the structure using a bench vice, jack or clamp.
5. Remove the piston and unscrew the cap from the tube.
6. Push out the resulting barrel of technoplankton.

For pressing in the microwave, you can use several options:

1. Using a plastic tube. From a plastic pipe of small diameter (about 30 mm, maybe smaller), you need to cut a piece of about 4-7 cm. Then you need to select 2 plugs that will tightly close both ends of the tube. Immediately close one end with a stopper and stuff the mixture tightly. Close the other end with a stopper and bake in the microwave. You can simply try to tightly fill a piece of tube without lids and put it in the oven. But with one lid, this form is much more convenient to fill out.
2. Using a syringe. You need 2 disposable syringes with a volume of 20 ml. Cut the syringe from the side of the needle nose so that you get a cylinder. On the one hand, plug the syringe with a piston, fill it with the substance and, on the other hand, press it tightly with a piston from another syringe. Then you can leave the second piston, or you can remove it and put the cylinder in the microwave.

Mistakes when making your own

1. It may seem that the mixture is quite dense without a press; just squeeze it in your hand and dry it on a towel. This is wrong. Insufficient density of the barrel can lead to spillage of complementary foods. Pay enough attention to the press, ensure maximum density.
2. Often, when making them themselves, during pressing, fishermen forget to leave holes for fastening. It is difficult to drill a hole in a finished barrel; the integrity of the bait is compromised and the barrel crumbles much faster than necessary.
3. Scattering is also typical for “lazy” baits, when ready-made cookies or crumbled animal feed are used as a base. When using ingredients with large particles, add more adhesive.

Cold pressing and microwave, what's the difference?

During cold pressing, the prepared mixture is placed in a device and, using pressure, gives it hardness, turning it into a tablet barrel.

When pressing in a microwave, the energy of electromagnetic radiation is used. To do this, the substance is placed in a plastic tube with stoppers at both ends and baked until the desired state is reached for about 20–30 seconds. Instead of a tube, you can take a disposable large syringe.

As a result of using these two methods, you will get almost the same result.

Adviсe

1. When preparing the mixture, pay attention to what type of fishing you are doing it for.
2. At different times of the year, silver carp likes different flavors of bait.
3. If the pond is heavily bloomed due to the heat, then the fish, on the contrary, will not be interested in feeding due to the abundance of food in the pond. During such periods, for fishing, look for bodies of water with clean water.
4. When fishing with bottom gear, be sure to “raise” the hooks above the technoplanton using foam balls; when fishing with float gear, there is no need to hook them.
5. If the current carries a cloud of food away from the hooks, then you can use a small sliding weight on the fishing line (cord) between the float and the rod. Be careful, when retrieving your catch, the tackle may become tangled.
6. Don't forget to frequently replace your hooks with new ones or at least sharpen them before each fishing trip.

A group of fishermen revealed the name of the secret bait during interrogation.

About 10 years ago, a similar bait appeared on the market, although it began to be manufactured in the British Isles. After some time, it appeared in Europe, but here it had already begun to be produced on an industrial scale.

Nowadays, technoplankton can be found in any specialized store. Despite this, many fishermen practice making this bait themselves, using improvised materials. As a rule, experienced fishermen find all the main ingredients in their kitchen.

Before the advent of technoplankton, attempts were made to catch silver carp using various baits of plant origin. These were cubes of fresh cucumbers, young cane, cucumber inflorescences, etc. With the advent of technoplankton, the general approach to silver carp fishing has changed, which has eliminated some of the problems. Now it has become easier to catch him. Unfortunately, the high cost of barrels worries many fishermen and pushes them to various kinds of experiments. For our fishermen, the main thing is the idea, and there are various ways to solve it and bring it to life, which is what they do.

To bring such an idea to life, it is not necessary to have expensive or rare ingredients. Making such bait is available to every fisherman who wants it. Moreover, the production of barrels is possible according to completely different recipes, including your own.

Communities › Hunting and Fishing › Blog › Technoplankton of our own making.

Fishing for silver carp is a very exciting thing, as it requires special gear, special equipment and is very different from the usual fishing with a float or feeder. Silver carp is a very strong fish and gives a lot of pleasure when fishing. Until recently, silver carp was a fish that fishermen believed was impossible to catch using legal fishing methods, but a new, previously unknown bait and bait rolled into one - technoplankton - appeared on the market. For the first time, its production by the factory method began in Hungary. Now it is produced in many countries of the world, including Russia. As you might guess, plankton is considered the most catchy, from Hungary, it is also the most expensive, the cheapest is Chinese. But even the cheapest Chinese technoplankton in our store costs 17 - 20 rubles for 1 barrel, which is enough in the water, depending on the fishing conditions and the quality of the product, for a period of 30 minutes to 1.5 hours. Hungarian plankton is noticeably more catchy, it lasts for 1 - 2 hours, but it costs 30 - 45 rubles per barrel. Fishing costs are not small, especially if you fish with several rods, and regardless of whether the silver carp bites or not, the plankton is consumed. Until this year, I caught silver carp using purchased technoplankton, but recently I seriously decided to master the production of technoplankton on my own. Several days of searching on the Internet, communicating with experts in this field, mainly here on Drive, and I received a picture of what I needed. Special, huge thanks to this person sereg78 And so. To produce technoplankton I needed: Step 1.

Make a mold. You can buy it on the Internet, but one made by a turner is much cheaper and can then be customized and further modified, as well as one of the elements can be turned and replaced at any time. I sharpened it with a turner I knew, according to the drawings I received. Initially the mold looked like this:

It consists of a thick-walled sleeve, a piston, a plug and a tube for pressing out the finished barrel. There is no knitting needle that is familiar to many, since I don’t fish with a rig with a traditional trempel yet, instead I use a rig with a feeder where I place a barrel of plankton. This is due to the fact that in the pond where I am currently fishing, there are a lot of small crucian carp, which quickly entangle traditional tackle and eat plankton much faster than in a feeder. If I eventually fish with traditional equipment, it won’t take long to make a spoke in the plug and a hole in the piston. Then some elements were modified in the design. The clumsy tube for pressing out, made from the first piece of pipe that came across, was replaced with a more accurate one. When producing the first batch of plankton, I encountered the problem of the piston getting stuck in the sleeve during and after pressing out the finished barrel, which often required knocking out the piston with a hammer, and the first barrels that you will see in the photo below were clumsy, with uneven edges. To eliminate these problems, again following advice from the Internet, the upper part of the piston diameter was removed by 2 mm. Thus, the lower, working part remained, in diameter a few tenths of a millimeter smaller than the inner diameter of the bushing, and the upper, non-working part, 2 mm smaller in diameter than the inner diameter of the bushing. Also, the working part of the piston was polished using fine sandpaper on a machine. You will also see the modified details further in the photo. Step 2.

Purchase and make components for technoplakton, make a mixture for pressing. The Internet is full of various recipes for homemade technoplankton. The main parts of which any technoplanton consists are: 1. Filler (basic mass), 2. Glue (for gluing all other components to avoid rapid disintegration), 3. Sprayer (for creating a cloud of turbidity, as they say, so that plankton dusts). I used the proven recipes of two anglers on the Drive, who have already caught more than one hundred silver carp using their recipes. At the request of their authors, I can give these recipes only in private and not to everyone, I think you will understand me. Below in the photo I mixed the first mixture in my life for making technoplankton:

Characteristics of technoplankton

The physical basis of such a bait is a combination of various components that have certain proportions. Technoplankton is made in the form of a barrel, which, when dropped into water, behaves in a very unique way.

Once in the water, the components begin to slowly dissolve, creating a huge cloud of small particles that silver carp love. This is especially interesting if you look at this cloud from the side: it is similar to a huge amount of small particles suspended in water that attract silver carp.

How does the keg work?

The operation of a pressed barrel is very simple, and everything that is very simple is considered ingenious. The rig has hooks on leashes of different lengths. When a voluminous food cloud appears, the hooks are located inside it. Silver carp, sucking in technoplankton, also sucks in hooks.

The bait is quite versatile and can be used on any water horizon, including the bottom.

But for this:

• If you plan to fish from the bottom, then it is better to take instant barrels with a disintegration period of up to half an hour.
• When fishing with a float rod or in conditions where the fish behaves passively, it is advisable to select dense barrels with a decay period of up to several hours.

Catching silver carp on technoplankton with a float

The principle of its operation is simple and clear.

On hot days, crustaceans become the main food for silver carp. Any accumulation of them attracts the attention of a freshwater whale, and it rushes to these interesting places. In addition to silver carp, this bait attracts the attention of carp , crucian carp and bream, especially if it is located near the bottom.

Technoplankton is a pressed bait (bait), which is a small cylinder with a hole for mounting on the main fishing line.

The bait contains ingredients with different physical properties - size, density, degree of buoyancy. Once in the water, the “tablet” begins to slowly dissolve—“dust,” releasing small particles into the water. Some of them rise to the surface, some sink to the bottom. Something hangs in the water column.

From a distance, this movement resembles an accumulation of plankton. A large fish sees such a “cloud”, approaches and begins to suck in water in this place. Along with the bait, a hook gets into the mouth of the same silver carp. The fish hooks itself.

Purchased technoplankton works in warm water for about one hour (tablet dissolution time). In warmer water the keg will dissolve faster. In cold weather, its validity period increases.

It is quite difficult to talk about exactly what ingredients and in what ratio are included in purchased bait. This mixture is quite expensive, so our poor citizens have come up with a lot of homemade recipes for this bait. Of course, each of these recipes has the right to life. Perhaps some of them can be taken and improved by companies specializing in the production of bait.

But for now, unfortunately, it is difficult for our Kulibin fish to compete with the laboratories of large manufacturers, who generally know much more about fish and its preferences than any expert fisherman.

Although it is impossible to completely exclude the possibility that a homemade bait will work better than a purchased bait.

Flavorings for technoplankton can be different, but honey or garlic .

Components of technoplankton

Barrels containing various ingredients are available. Therefore, it is possible to choose bait to suit your fishing conditions. Despite this, many manufacturers do not disclose some production secrets. In this regard, our fishermen have to experiment.

If the barrels are poorly pressed when preparing bait, then you need to add a little water to them. The amount of water is calculated based on the cost of preparing 1 barrel: about half a gram is needed. The result of such production should be a barrel characterized by a certain density and hardness.

To reduce the rate of decomposition of the bait in water, starch or rice flour should be added to the composition. At the same time, you need to be careful, since their overdose leads to the opposite effect: the keg will dissolve much faster.

Filler

This ingredient plays a major role in making quality kegs. Basically, oat, corn, buckwheat, pea or wheat flour is chosen for this purpose. If possible, you can add crackers to the main composition, grinding them to flour.

Preparation of technoplankton does not require careful adherence to proportions. The most important thing is the careful processing of each ingredient, although the fish may ignore any flavor. For example, many fishermen recommend frying crackers or cookies in a frying pan for a brighter aroma. In addition, oatmeal can create exactly the feed cloud that is needed.

Read also: Pressure gauge readings should be

Adhesive base

The adhesive base is necessary for the barrel to have a certain strength. Despite this, it should not impede the process of decomposition of the bait into small particles.

At home you can use:

• Maltodextrin.
• Dextrin.
• Powdered sugar.
• Powdered milk.
• Dry cream.

The presence of the adhesive base should be no more than 10% of the presence of all ingredients.

Use of flavorings

Whether or not to use flavorings depends on who is fishing. This ingredient, in this case, is optional. These substances are available both in the form of dry powders and in the form of liquids. As a rule, they are characterized by a very strong aroma that will not leave anyone indifferent. Mostly sweet aromas are used, such as vanilla, spice, honey, strawberry or raspberry.

Advantages and disadvantages of technoplankton

The advantages include:

1. The presence of an aroma that attracts fish.
2. In addition to silver carp, you can catch other types of fish with it.
3. Only such compositions provide a large cloud of small food in the water column.

Disadvantages of bait:

• Factory-made barrels are expensive.
• Very often there are fakes that do not meet the stated characteristics.

Such disadvantages can be reduced to zero if you make technoplankton yourself at home.

What it is

Technoplankton looks like a tightly compressed thick barrel with a through hole along the axis for attaching to tackle. Instant kegs are made to dissolve in half an hour. For bottom fishing, it is better to use denser mixtures with a dissolution period of several hours.

Various types of flour, crumbs and other nutrients are added to the barrel of complementary foods. This is important for the formation of a voluminous cloud, which allows you to catch fish in troubled water without any problems, taking this expression literally. Using technoplankton as bait makes fishing as effective as possible; there is a greater chance of catching large fish that swim to a seemingly harmless cloud of attractive food.

For many, the name seems strange, but it is quite accurate. Technoplankton is a man-made nutrient plankton , a breeding ground for fish. Techno - in this case does not mean the natural origin of the ingredients, but made in compliance with a certain technology.

What kind of fish is caught on technoplankton?

Technoplankton is designed to catch those fish that absorb food while eating. The composition of any technoplankton recipe always contains components that allow the fish to feed in this particular way. These fish include silver carp, as well as other types of fish, such as carp, carp, track, bream and even perch.

Technoplankton on silver carp

As mentioned above, this type of bait was created specifically for catching silver carp. After some time, it became clear that other fish could be caught with it. In this regard, barrels with ingredients designed for catching carp, carp, etc. began to be developed. In other words, this is the same technoplankton, but designed for different fishing conditions.

Self-made devices

The main device is considered to be a press, without which it is impossible to obtain a barrel of classic technoplankton. Making it is not at all difficult if you follow these steps:

1. Prepare a small piece of metal pipe with holes located at equal distances from one another.
2. A screw should be inserted into the holes so that they can serve as a device for fixing the press.
3. All screws must be equipped with nuts.
4. The container with the aroma insert is placed in this pipe.
5. After this, you can begin filling the structure with a homemade composition of technoplankton.

Where to buy a mold for technoplankton?

To save their time, enterprises involved in the production of fishing products have also launched serial production of this equipment.

Unfortunately, not all companies manufacture such structures. It is much easier to purchase such a product via the Internet from some fishing master who makes them for sale.

Almost all experienced fishermen prefer to use bait and groundbait made independently, since its composition is always precisely known. Home-made technoplankton is no different in terms of catchability than store-bought ones, and fish bite on it much better.

Some nuances of preparing technoplankton with your own hands

No matter how simple it may be to prepare bait at home, it is better to follow some unwritten rules. For example:

• When producing technoplankton, it is always necessary to use compounds that are capable of creating turbidity in the water column during contact with it. The presence of small particles that are separated from the pressed barrel and float or are distributed over separate horizons and are designed to attract fish. Being in suspension, the muddy cloud resembles plankton - the food supply of silver carp.
• The bait must contain both light and heavy elements so that they can be properly distributed in the water column.
• You should not use more than five ingredients. In this case, you should be guided by the fact that quality should come first, but not quantity.

As many fishermen point out, making technoplankton yourself is not at all difficult, but it is better to first purchase a simple device that will help speed up the process of preparing the mixture.

Powdered milk or its analogues must be included in the main composition. Such ingredients quite easily leave behind a cloudy residue. If you plan to fish from the bottom, then starch will not hurt. Oat bran will do instead. As practice shows, this is a pretty good option. As a rule, the bran, after being separated from the barrel, begins to float, which will certainly interest the silver carp.