What is the qualification category according to the OKZ of a welder?
HEAD CERTIFICATION CENTER of the East Siberian region
Heads of enterprises and organizations
Information mail
Certification point of the East Siberian region VSR-GATs-4AP
, is recruiting groups for the certification of welders (for the autumn-winter period 2003-04) in: -Manual arc surfacing with coated electrodes;
-Manual argon arc surfacing; — Manual arc welding with coated electrodes [RD] (111)
;
— Manual argon-arc welding with a non-consumable electrode [RAD] (141)
.
— Mechanized welding with a consumable electrode in an environment of active gases and their mixtures [MP] (135)
— Mechanized welding with flux-cored wire in an environment of active gases
[MGG] (136)
— Automatic argon-arc welding of welding pipes into tube sheets of heat exchange equipment
[AMA]
* in brackets the welding method code according to the European classification is indicated.
The new “Rules for the certification of welders and welding production specialists PB-03-273-99”
provide for:
1. Requirements for the minimum work experience in the specialty required for a welder to be admitted to primary certification.
Welding and surfacing methods
Minimum work experience in welding method, months.
Manual arc, gas, mechanized with non-consumable and consumable electrodes in protective gases, incl. in pipe welding into tube sheets
2. Acceptance of applications from the Customer
The application for welder certification must strictly comply with the form established by technological regulations
RD 03-495-02
.
We also offer a certification application form (doc file)
.
The application must contain the following information: a) full name of the customer organization, its postal and telegraph address, telephone and fax (if available); b) the outgoing application number and the date of its sending to the certification point; c) last name, first name and patronymic of the candidate, year and date of birth in full; d) work experience in welding and qualification category according to OKZ must correspond to the entries in the candidate’s work book; e) The objects for which the certified candidate will weld must be listed (according to the list of groups of dangerous technical devices approved by UNTS NAKS
dated June 14, 2000).
The NTD (PTD)
code is given , in accordance with the requirements of which welding work must be carried out, for example: - for boilers and pipelines this is
RD 153-34.1-003-01
and
the GGTN
;
- for pressure vessels - PB-10-115-96
and
OST 26.291-94
- for process pipelines -
RD 38.13.004-86
and so on;
g) the columns are filled in with symbols in accordance with the Rules, for example - RD (111)
,
M01 (W01)
,
L+T (P+T)
and so on;
h) the regulatory document on control is indicated by the Customer on the basis of the NTD
and
PTD
, which stipulate mandatory methods of control of products manufactured (installed, repaired, etc.) by the Customer.
This can be ultrasonic testing (GOST 14782)
, radiography
(GOST 7512)
, visual measurement testing
(RD 34.10.130-96)
, magnetic testing method
(GOST 21105)
, spectral analysis
(RD 34.10.122-94)
, mechanical testing
(GOST 6996)
and so on;
i) the application must be signed by the financial manager of the customer enterprise (general director, director, first deputy general director, etc.). In this case, the application must indicate the position of the manager, his last name, first name and patronymic. The application is accepted in two identical copies, one of which, after registration with the GAC VSR,
is returned to the Customer along with an agreement to pay for the work for certification, and the second remains in the personal file of the candidate for certification.
The following required documents must be attached to the application:
2.1. A copy (photocopy) of the welder’s work book, certified by the signature and seal of the HR department of the customer’s organization and having the final phrase: - “... and is still working”; 2.2.Copy (photocopy) of the document on general education, certified by the signature and seal of the HR department of the customer organization; 2.3. A copy (photocopy) of a document on special education in welding (GPTU diploma, welder’s certificate, etc.), certified by the signature and seal of the HR department of the customer organization; 2.4. Medical certificate (or its certified photocopy) about the health status of the certified candidate, which must indicate that he can work as a welder. The certificate can be recognized as valid if it is issued within six months before the date of filing the application for certification. 2.5. Two photographs measuring 3x4 cm. For candidates certified for several welding methods, photographs (two copies) are provided for each method (certificate). All of the above documents for each candidate being certified must be in a separate folder (vinyl corner). After consideration and processing of applications, the Customer is sent a contract, an invoice for payment and information about the timing of the special. training and certification.
