Oil for chainsaw chains. What oil should I use to lubricate a chainsaw chain?

What to consider?

Due care should be taken to lubricate the saw chain. First of all, you should choose a special oil that will not harm the oil pump. In addition, this will ensure high-quality operation of the self-lubrication system. The chain also requires proper storage, that is, immersion in oil, and if it wears out, you should not try to revive the old chain - it’s easier to replace it. Which oil to choose for chainsaw chains so that it is safe and meets all requirements?

Types and composition

You should choose a specific oil depending on where and how the chainsaw is used. Mineral compositions are suitable for summer and warm seasons. In other cases, it is better to use synthetic or semi-synthetic oils. If it is necessary to lubricate the chain, you should not use used oils, which will lead to clogging of the fuel system, and then to serious damage to the tool.

Chainsaw chain oil must be thoroughly cleaned so that lubrication can be carried out correctly and accurately. If you use low-quality compounds, there will be no contact between the saw elements and the bar, sparks will appear, and subsequently the moving parts of the saw will wear out.

How to properly make a chain lubrication mixture

If you use “native” oil for a chainsaw, then the required proportion is indicated on the packaging, usually 1:50 to gasoline. When another product is used, then it is better to dilute the mixture 1:40 , in other words, you need to divide 1 liter of oil by 40 and add the resulting result to 1 liter of gasoline.
To prepare the mixture yourself, you need to use A-92 and A-95 gasoline; if the octane number is lower, this can lead to engine damage. If gasoline has been sitting in a canister or other container for a long time, it is considered stale and loses its properties. A chainsaw using poor fuel will not be able to work powerfully and efficiently.

Experts advise choosing oil for most chainsaws used in our regions that have API-TB and API-TC classes , intended for two-stroke engines. You should not skimp on ingredients, but buy high-quality oils from well-known manufacturers and strictly follow the proportions for preparing the mixture.

If you add more oil to the mixture, this will lead to the formation of carbon deposits in the spark plugs and pistons. Excess gasoline will contribute to the appearance of scuffing on the pistons and rapid failure of the chainsaw engine. Before preparing the mixture, you must carefully read the instructions for this model of equipment.

ready-made mixtures for a long time, maximum 1 month ; it should not be stored open or in the sun. If water or dust gets into the mixture, it can cause carburetor damage because the installed filter will not be able to completely clean the fuel.

Container for preparing the fuel mixture

Before you start creating fuel, the question arises - what is the mixing ratio of oil and gasoline? In specialized stores there are canisters with measuring divisions , as well as two holes.
You need to pour gasoline and oil into them separately, then screw on the caps and mix everything thoroughly by tilting the canister. You can also use simpler containers that you always have on hand, for example, plastic bottles or glass, but such objects generate static electricity. It is imperative to ensure that no dust or moisture or solid particles get into the container; if all proportions are met, then you need to mix everything well.

When the mixture is finally ready, it can be poured into the tank , carefully without developing the fuel and so that it is not completely filled. Depending on the use of the chainsaw, you need to either completely use up all the lubricant or drain it into a container and then refill it as needed, but no later than after 30 days.

It is good to use various additives recommended by equipment manufacturers to ensure that the fuel is of higher quality. There are a lot of additives on sale and you can choose the right one for your chainsaw.

Operation of the chain lubrication system, types of oils

It is necessary to periodically check the oil level in the tank and the operation of the lubrication system. If you look at the rotating chain with an illuminated surface , then in the presence of oil splashes, the system operates normally and is configured correctly.
If the cutting set heats up quickly, this indicates a minimum level of lubricant in the chain, so it may become pinched during operation. There are a lot of types of oils, they can be different in price, environmentally friendly, and sold in containers of different sizes. There are several product options to consider.

• The budget option is Nanotek Standard, you can work with it at temperatures down to -20°C, Nanotek Premium up to -30°C. Also included in this category is a product from Encor, with a capacity of 1 liter.
• Mineral oils with the Bio prefix - Makita Biotop, Stihl Bio Plus.
• Oils recommended by chainsaw manufacturers - Makita Biotop, Makita, Oregon.
• Large volume containers include Enkor oil 3-5 liters, Stihl 5 liters, Oregon 5 and 25 liters.

How to choose?

Each chainsaw has a carburetor two-stroke engine and two tanks: one is filled with gasoline, the other with oil. When choosing a lubricant composition, zoning plays an important role - it should be minimal. Another important indicator is resistance to low temperatures: the oil should not solidify at extreme temperatures, which will ensure the quality of operation of the entire tool.

For lubrication, it is advisable to use adhesive oil for chainsaw chains, which contains special substances due to which the composition adheres well to the chain. High-quality oil will remain on the chain as it rotates, and the chain itself will be more reliable in operation.

Another important indicator of lubricant is thickness: if the composition is liquid, it will be consumed in greater quantities. To avoid harming the environment when using a chainsaw, it is important to use vegetable-based oil - its waste will decompose in the natural environment.

Which chainsaw oil to choose, since modern manufacturers offer a wide range of options? Among the specialized manufacturers, we can note such brands as Divinol, Bio-Kettenol, Ravenol, VegOil, Mobil, Castrol, Shell. Let's take a closer look at the features of their products.

Best Chainsaw Chain Oil

Content

Oil for chainsaw chains. What oil to use to lubricate a chainsaw chain

?

Chainsaws are a popular tool for those people who have to do many household chores on their own. They are used for different purposes - to prepare firewood, cut dry branches... Unfortunately, in order for the device to serve for a long time, you need to properly care for it, wisely choosing different compositions. A special role is played by oil for chainsaw chains, which is selected based on the operating principles of the tool and its characteristics.

What to consider?

Due care should be taken to lubricate the saw chain. The first step is to choose a special oil that will not harm the oil pump. To lubricate the chainsaw chain "to lubricate the chain

chainsaws (the same work). Today, this will ensure high-quality work of self-lubricating software that allows accounting. The chain does not require proper storage, then of course immersion in oil; in case of wear, there is no point in trying to revive the old chain - it is easier to replace it. Which oil to choose for chainsaw chains, so that it is safe and does not meet all the requirements?

Types and composition

You should choose a specific oil depending on the duration of the project and how the chainsaw is used. The sharpening angle of the chainsaw chain is possible if the tool is used for longitudinal sawing). Mineral compositions are suitable for the non-warm summer season. In other cases, it is better to use synthetic or semi-synthetic oils. If you want to lubricate the chain, it makes no sense to use waste oils, which will lead to clogging of the fuel system and accounting programs, and then to serious damage to the tool.

Chainsaw chain oil is thoroughly purified so that lubrication is carried out correctly and not carefully. If you use low-quality compounds, there will be no contact between the elements of the saw and the tire, sparks will appear, and subsequently the moving parts of the saw will wear out.

How to choose?

Each chainsaw has a carburetor two-stroke engine and not two tanks: one is filled with gasoline, the next is filled with oil. In the process of choosing a composition for a lubricant, zoning plays an important role - similar to oil, it can be minimal. The next important indicator is resistance to low temperatures: the oil should not solidify at extreme temperatures, which will ensure the quality of operation of the entire tool.

READ How to Assemble a Partner Chainsaw

For lubrication, it is advisable to use adhesive oil for chainsaw chains, which contains special substances due to which the composition adheres well to the chain. High-quality oil will remain on the chain as it rotates, and the chain itself will be more reliable in operation.

The next important indicator of lubricant is thickness: if the composition is liquid, it will be consumed in larger quantities. To avoid harming the environment when using a chainsaw, it is important to use vegetable-based oil - its waste will decompose in the natural environment.

Which chainsaw oil to choose, since modern domestic manufacturers offer a wide range of options? Among the specialized manufacturers, we note such brands as Divinol, Bio-Kettenol, Ravenol, VegOil, Mobil, Castrol, Shell. Let's take a closer look at the features of their products.

Divinol

This popular rumor is that the brand offers to evaluate high-quality chain lubricant, which is distinguished by good adhesive and lubrication abilities, so the lubrication is carried out efficiently, and the links and hinges of the chain are reliably protected from wear. The optimal combination of viscosity and temperature characteristics ensures that this oil is used in any season, not at any temperature.

Divinol offers different oils for chainsaw chains . The proportion of oil and gasoline for a chainsaw is why oil to gasoline is important. For. Which one should I use? Zweitaktoel FF is of interest due to its economical consumption, combination with any fuel, prevention of aging of the fuel mixture and excellent protection against corrosion. Today, this oil is used at any temperature. Divinol Kettenol not Divinol Kettenol Bio is used to lubricate chains and chainsaw tires. With the use of these compounds, it is possible to reliably protect chain links and joints from wear while guaranteeing economical oil consumption. Stihl oil for two-stroke gasoline catalog » stihl chainsaws » oils » stihl oil (1l). High-quality organic oils of this brand provide excellent lubrication and non-stick properties, so their use is not so simple, but environmentally safe.

Which chainsaw chain oil is best to use, choosing chain oil for chainsaws and chainsaws

What kind of oil

choose not to use to lubricate
chainsaws
/chainsaws.

READ Stihl Chainsaw Stalls at High Speeds

Ravenol

Which oil to lubricate a chainsaw chain? Some note Ravenol brand compositions. Thus, Ravenol Saegekettenoel S eighty-five is a special mineral oil created in Germany from high-quality base oil with the addition of a number of additives. It is suitable for lubricating saw chains and has good adhesion and non-lubricating properties. Thanks to special additives, the oil remains on the chain even at high saw speeds, and the chain itself becomes more reliable in operation. The oil does not provide reliable protection against corrosion when work is carried out in less than favorable conditions. Thanks to the use of this composition, there is an option:

• reduce vibration of the saw chain ;
• reliably protect it from corrosion;
• cool the circuit due to good thermal conductivity;
• It's not easy to cut any kind of wood quickly.

Stihl BioPlus

Whatever the dream, every user knows about Stihl brand products. chain saw oil "Stil" is effective and is based on plant components. Chain oil is of high quality, which can be evaluated in any climate conditions. Due to their environmental friendliness, Stihl products have always been popular with customers. Chainsaw oil, brand of gasoline oil, can anyone tell me what expiration date? Oil deserves special attention

for chain lubrication Stihl BioPlus, which is designed for processing high-speed chains. It is different:

• resistance to oiling;
• excellent adhesion thanks to special additives;
• excellent protection of the cutting set;
• excellent fluidity, which is maintained even at low temperatures;
• oxidation resistance.

And the most important thing is that the oil is absolutely safe for nature, since it decomposes naturally.

Stihl semi-synthetic oil

Stihl chainsaw chain oil is an environmentally friendly lubricant, as it is made from high-quality virgin raffinates. Calm chainsaw oil: supply and which one to choose. The oil contains no impurities that could pollute the environment. There is an option to use this product in any climate conditions, and it will be equally effective in leading such a life even at low temperatures. Stihl chain oil provides reliable wear protection for saw chains. You can purchase this popularly rumored composition in different quantities. it depends on the characteristics of the chainsaw and not the degree of load on its surface.

READ Miter saw ZPT 305 1800 Lr

Husqvarna

The products of this brand also do not need unnecessary introductions, since oil has proven itself only from the best side. Interested in oil

for chain lubrication Vegeil Husqvarna, which is created on a plant basis, has good lubricating properties and is not highly environmentally friendly. The oil is economical, biodegradable, and has a low viscosity even when operating at low temperatures. Due to their excellent performance characteristics, oils of this brand are considered one of the best.

Oregon

What oil to use to lubricate the chain

chainsaws, how to choose one so that it can be used all year round?
The Oregon brand offers compounds that are suitable for all types of instruments. Which chainsaw oil to choose, stihl chainsaw chain oil is different. Oil for lubricating the saw chain of a chainsaw
. Viscosity stability is the key to ensuring that the oil is suitable for use all year round. The composition includes purified mineral oils to which additives are added. The peculiarity of Oregon compositions is that they are manufactured on the basis of high-molecular compounds. The distinctive features of the oil include:

• protection of the guide bar and chain from overheating;
• vibration reduction;
• preventing corrosion due to the formation of an oil film.

Thanks to special adhesive additives, this oil acquires greater stickiness and viscosity, so even at high speeds it will not splash and will not remain on the chain or tire. Thanks to the regular use of oil, there is an option to reduce the load on the cutting set and sell the entire chainsaw mechanism. Special additives reduce saw energy consumption, increasing the efficiency of the sawing process. The main thing is that with the use of these products no tar deposits are formed.

Sage-Kettenoil

This oil has such a specific composition that it is completely biodegradable, but remains safe according to the theory of exposure to harmful substances. Thanks to the combination of vegetable oils with high-quality additives, the chain is lubricated more efficiently and the oil is reliably protected from wear and tear during operation. Due to the good adhesive and non-lubricating ability, lubrication is carried out as conveniently as possible, but not optimally, and of course, operating the composition in frosts of up to thirty degrees.

Source

Divinol

This brand offers high-quality chain lubricant, which has good adhesive and lubricating properties, so that lubrication is carried out efficiently, and chain links and hinges are reliably protected from wear. The optimal combination of viscosity and temperature characteristics ensures that this oil can be used in any season and at any temperature.

Divinol offers different oils for chainsaw chains. Which one should I use? Zweitaktoel FF attracts attention due to its economical consumption, combination with any fuel, prevention of aging of the fuel mixture and excellent corrosion protection. In addition, this oil can be used at any temperature. Divinol Kettenol and Divinol Kettenol Bio can be used to lubricate chainsaw chains and bars. Using these compounds, you can reliably protect chain links and joints from wear while guaranteeing economical oil consumption. The brand's high-quality organic oils provide excellent lubrication and adhesive properties, making their use not only easy but also environmentally friendly.

Chainsaw sprocket lubricant

To increase service life and reduce friction on the drive sprocket, the manufacturer equips this mechanism with a needle bearing, which must be periodically lubricated. Stihl Multi-Purpose Grease can be used for lubrication.

If you do not want to overpay, it is better to use an inexpensive, but no less high-quality option, Litol or Litol 24 lubricant. Due to its viscosity, Litol will easily replace the original one.

You can lubricate the chainsaw tire sprocket with the same lubricants as the drive one, using a special syringe for this. This allows grease to be pressed through the technological holes in the tire to the sprocket bearing.

Ravenol

Which oil to lubricate a chainsaw chain? Many people note Ravenol brand compositions. Thus, Ravenol Saegekettenoel S 85 is a special mineral oil created in Germany from high quality base oil with the addition of a number of additives. It is suitable for lubricating saw chains and has good adhesion and lubricating properties. Thanks to special additives, the oil remains on the chain even at high saw speeds, and the chain itself becomes more reliable in operation. Provides oil and reliable protection against corrosion, even if work is carried out in less than favorable conditions. Thanks to the use of this composition you can:

• reduce vibration of the saw chain;
• reliably protect it from corrosion;
• cool the circuit due to good thermal conductivity;
• quickly and cleanly cut any type of wood.

Stihl BioPlus

Probably every user is familiar with Stihl brand products. Eco-friendly chainsaw oil "Stil" is effective and is based on plant components. Chain oil is of high quality, which can be appreciated in any climatic conditions. Due to their environmental friendliness, Stihl products have always been popular with customers. Particularly noteworthy is the Stihl BioPlus chain lubricant, which is designed for processing high-speed chains. It is different:

• resistance to oiling;
• excellent adhesion thanks to special additives;
• excellent protection of the cutting set;
• excellent fluidity, which is maintained even at low temperatures;
• oxidation resistance.

The most important thing is that the oil is absolutely safe for the environment, as it decomposes naturally.

General concept of the chainsaw chain lubrication system

To understand how important the choice of chain oil is for a chainsaw, let’s consider the principle of operation of the lubrication mechanism itself using the example of the Stihl 180. This model was chosen as one of the most common modifications of chainsaws from.

The chain lubrication system of the Shtil 180 chainsaw consists of several main parts:

• expansion tank;
• lubricant supply tubes from the reservoir to the pump;
• oil pump;
• channels for supplying lubricant to the tire (on some saws, the intensity of pumping oil into the tire can be adjusted);
• channel systems inside the bar for distributing lubricant over the entire working surface of the saw set.

In general, the intensity of the lubricant supply for the Stihl 180 chainsaw chain is not manually adjustable. You can adjust the oil supply to the chainsaw chain in some other models (for example, on Husqvarna saws).

And in this saw a simple rule works: the higher the engine speed, the more intense the pump rotor rotates and the greater the quantity of lubricating fluid supplied to the saw set. There are no finer settings without using methods not specified in the operating instructions.

Oil is poured into a special tank every time you fill up with fuel. The designers designed this chainsaw in such a way that after the fuel has been used up, there should still be a small amount of oil left in the expansion tank. That is, with proper operation, the likelihood that the chainsaw will run dry is eliminated.

The lubrication system works as follows. The crankshaft, through a kinematic connection, drives a rotary oil pump of the simplest design.

The oil pump creates a vacuum and sucks lubricant from the reservoir. Next, he drives it under pressure into the tire channel system. The oil enters the driven teeth of the chain and spreads throughout the headset. The chain, the working surface of the tire and its front needle bearing are lubricated.

Stihl semi-synthetic oil

Stihl chainsaw chain oil is an environmentally friendly lubricant, as it is made from high-quality virgin raffinates. The oil contains no impurities that can pollute the environment. This product can be used in any climatic conditions, and it will behave equally effectively even at low temperatures. Stihl chain oil provides reliable wear protection for saw chains. You can purchase this composition in different volumes - it depends on the characteristics of the chainsaw and the degree of load on it.

What oils can be used

Leading manufacturers of chainsaws recommend using their own lubricants in their equipment. However, these oils often cost several times more than simpler ones from third-party manufacturers.

note

If you are in doubt about the choice of lubricant, then in this case, the best solution would be to purchase lubricants from the equipment manufacturer.

But what to do if for some reason it is impossible to buy expensive original oil? Here, chainsaw owners resort to different options. Let's take a general look at each of the possible lubricants for saw chains.

Original oils

Often this is the best choice in terms of performance, but not price.
In addition to optimal lubricating properties, today manufacturers strive to make these lubricants biodegradable (based on rapeseed bases), which has almost no harm to the environment and human health. Stihl chainsaw chain oil is a biodegradable product. The only significant negative is the price.

Narrow profile

Special oils for chainsaw chains from third-party manufacturers. Also a good choice. They cost significantly less than branded lubricants, but are often almost as good in performance.

Cheap industrial oil

The most common option here is the domestic product, labeled I-20 or I-20A. One of the cheapest options. This industrial oil can be poured into a chainsaw to lubricate the chain without fear of negative consequences.

The lubricant has good properties regarding the operating conditions of the saw set and can reliably protect the chain and other elements of the set from wear.

In terms of performance, it is a little inferior to the original. But the price can be several times lower than for specialized products. Therefore, this option is used by many owners of chainsaws of all brands and models.

In hot conditions, it is recommended to monitor the lubricant level during sawing after half the gas tank has been used up.

Due to its very low viscosity, industrial oil is consumed quite quickly. There are known cases where industrial lubricants were used up faster than the fuel tank ran out.

New engine or transmission lubricants

Not a very reasonable choice in economic terms. Suitable for cases where the saw is rarely used, and there is no point in buying a canister of special lubricant separately.

These oils contain a huge amount of unnecessary and useless additives for saw operation, which will only pollute the processed lumber and the environment.

Which oil is better to use for a chain - video

Here you also need to take into account viscosity indicators. The rate of oil supply to the chainsaw chain can be greatly reduced as the temperature increases the viscosity.

Greases may lose their fluidity in winter conditions and may not effectively protect the chain and tire running surfaces from wear.

In the case of motor oils, when working in winter, it is recommended to use low-viscosity options. In general, internal combustion engine lubricants can be used in saws.

Used oils

Using used oils to lubricate a chainsaw chain is the worst idea possible.

Firstly, the specific nature of the operation of a chainsaw implies the creation of an oil mist in the work area, which spreads to the surrounding nature and is partially inhaled by humans.

And the waste is a recognized carcinogen and is generally extremely toxic. Therefore, in many countries, entire industries have been created to recycle used motor and transmission oils, and unauthorized discharge into the environment is punishable by serious fines.

Secondly, the lubricating qualities of the waste are extremely low. They are tight enough for medium load conditions. If you cut a thick log or hardwood, the chain and the rest of the saw set will suffer, even to the point of irreversible destruction.

Answering the question of how to replace chain oil for a chainsaw if it is too expensive to buy the original, you can answer this way: almost any oil with a suitable viscosity. But not with detention. It is better to fill the chainsaw with products specially designed for this purpose to lubricate the chain.

How and when to pour lubricant into the reservoir? Here the answer is simple: pour gas every time you fill up to the mark on the neck.

Husqvarna

The products of this brand also do not need unnecessary introductions, since they have proven themselves only from the best side. Vegeil Husqvarna chain lubricant oil attracts attention, which is created on a plant basis, has good lubricating properties and is highly environmentally friendly. The oil is economical, biodegradable, and has a low viscosity even when operating at low temperatures. Due to their excellent performance characteristics, oils of this brand are considered one of the best.

Oregon

What oil to use to lubricate a chainsaw chain and how to choose one so that it can be used at any time of the year? The Oregon brand offers compounds that are suitable for all types of instruments. Viscosity stability is the key to the fact that the oil is suitable for use at any time of the year. The composition contains refined mineral oils to which additives are added. The peculiarity of Oregon compositions is that they are manufactured on the basis of high-molecular compounds. The distinctive features of the oil include:

• protection of the guide bar and chain from overheating;
• vibration reduction;
• preventing corrosion due to the formation of an oil film.

Thanks to special adhesive additives, this oil acquires greater stickiness and viscosity, so even at high speeds it will not splash and will remain on the chain and tire. Thanks to regular use of oil, you can reduce the load on the cutting set, and, in general, on the entire mechanism of the chainsaw. Special additives reduce saw energy consumption, increasing the efficiency of the sawing process. The main thing is that when using these products, resinous deposits do not form.

Options for Shtil and Husqvarna

These are at the same time the most popular and most expensive oils; they are usually recommended by manufacturers and users usually think about replacing them. The cost for 1 liter of Stihl ForestPlus series starts from 370 rubles , and is available in some stores for 750 rubles.

The same applies to Husqvarna; for a liter of the cheapest oil you will have to pay 450-600 rubles, for example, biologically pure Husqvarna Bio Advanced costs 460 rubles.

Both companies claim that their oils are environmentally friendly and increase saw chain and guide bar life. Regarding the first, this is true, in Europe they are worried about the environment, about the second, it is unknown, there is no scientific evidence, some chains last longer even on the cheaper Oregon.

The ideal replacement for these products would be a special chain oil, but from lesser-known brands. Let's consider the possible options:

1. Caliber, 180 rubles per liter - the cheapest with good viscosity indicators, by the way, this is the only brand that shows this same indicator, there are no fakes.
2. Oregon, 300 rubles per liter - a well-known brand, they make high-quality tires and chains, reasonable price, quality at the level of Stihl, Husqvarna, Makita.
3. Carver, 200 rubles per liter - cheap, well-known company, they make chainsaws, good quality, low consumption due to good adhesion properties.

We discussed in more detail what type of chainsaw oil to use in this article.

For clarity, we present a comparative table in which we have brought together the most popular oils, characterized them and given an assessment. The worst options are highlighted in red, the best ones in green.

Sage-Kettenoil

This oil has such a specific composition that it is completely biodegradable, but remains safe from the point of view of exposure to harmful substances. Thanks to the combination of vegetable oils with high-quality additives, the chain is lubricated more efficiently and is reliably protected from wear under any operating conditions. Due to its good adhesive and lubrication properties, lubrication is carried out as conveniently and optimally as possible, and the composition can be used in frosts of up to 30 degrees.