Which furniture stapler to choose: TOP 13 popular models

The appearance of upholstered furniture often deteriorates due to abrasions, difficult to remove stains and other defects. In this case, it is not necessary to throw away the furniture and spend money on new ones, since you can reupholster it. A furniture stapler can help in this matter; thanks to special staples, it secures the material to any type of frame. In this article we will talk in detail about devices of this type and find out what types they are divided into.

Design and principle of operation of a construction stapler

The furniture stapler is widely used by builders and furniture makers, as well as representatives of other fields of activity. Based on the type of energy used to fire a shot during operation, the following types of takers are distinguished:

• mechanical;
• electrical;
• pneumatic.

The first two types are intended for domestic use, while the last type of tool is considered professional and is used mainly when performing large-scale work. The operating principle of mechanical and electric staple guns is based on pushing out fasteners by the force of a cocked (compressed) spring. After pressing the trigger, it unclenches, which causes the striker to move. He strikes the staple (nail or pin), driving it into the surface of the material.

Read also: Time Timer for Street Lighting

Mechanical stapler design

Manual (mechanical) staplers differ from their analogues in their simpler design. They consist of the following components and parts:

• cocking handle;
• a safety bracket that protects against accidental shots when transporting the tool;
• impact springs;
• shock absorber;
• drummer;
• striker;
• impact force regulator, providing the ability to work with material of varying degrees of hardness (different densities);
• housings;
• charging spring;
• store for fasteners;
• rammer (with spring and lock);
• tip that allows you to accurately drive fasteners.

The diagram of the staple gun device is shown in the photograph below.

The impact mechanism is the main unit of the stapler, cocked by the force of the worker’s muscles. It can be equipped with two types of springs:

Manufacturers indicate in the operating instructions for products the type of spring installed.

The twisted spring mechanism shown in the photo above is equipped with cheap models. They can be easily distinguished by the adjusting screw located on the tool body on the opposite side of the staple outlet hole. But it is also possible that the wing will be missing, then you will need to refer to the instructions to determine the type of spring installed.

Leaf springs are more powerful, but more expensive than their coiled counterparts. At the same time, the impact of a tool equipped with them during operation is less. They also have a long service life and are easier to cock. The leaf spring mechanism is installed on models intended for professional use.

Design features of electric and pneumatic staplers

The device of a network-type electric stapler is shown in the photo below.

The numbers in the photograph correspond to the following structural elements:

• trigger;
• fuse;
• handle with special coating;
• power cord;
• on/off switch;
• shock force regulator;
• pusher mechanism;
• shop.

Inside the tool there are electric drive and impact mechanisms. In this case, the electric motor is designed to charge the spring.

Battery models do not have a power cord: batteries are installed instead.

The design of a pneumatic furniture stapler is more complex than its mechanical counterparts. Pneumatic tools consist of the following structural elements:

• housings;
• a cylinder with a piston located inside it;
• starting systems (trigger mechanism);
• magazine for fasteners with a pusher;
• impact mechanism;
• an inlet fitting designed to connect a high-pressure hose to the tool;
• regulator of penetration depth of fasteners (impact force);
• air distribution unit.

Pneumatic type scrapers are powered by the energy of compressed air supplied by a compressor or from a cylinder. After pressing the trigger, the gas passes through the air distribution unit. Next, the compressed air enters the cylinder, causing the piston to move. The latter transfers energy to the striker striking the fastener. After impact, the staple or nail is driven into the surface of the material.

Best lists

We present to your attention a list of the best furniture staplers in the three most popular categories:

• Mechanical.
• Pneumatic.
• Electric.

We propose to dwell in more detail on each of these categories and the models described in them.

Mechanical

MATRIX MASTER is considered the most popular in furniture manufacturing enterprises. The main task of the device is to fasten sheets of material of various thicknesses to wood. The stapler contains a special mechanism, thanks to which you can independently control the depth of driving the staples. The device is completely made of chrome-plated steel and has reliable protection against rust.

Cost: from 400 to 720 rubles.

furniture stapler MATRIX MASTER

Pneumatic

MATRIX 57415 is a pneumatic furniture stapler. Its magazine capacity is designed for 160 medium-sized staples, which allow you to quickly and easily fasten plywood, drywall, leather and paper. The approximate operating pressure range ranges from 60 to 100 pounds per square foot.

Cost: from 1,000 to 1,600 rubles.

furniture stapler MATRIX 57415

Electric

Kolner KES 650 does an excellent job with all types of fabrics, films, leather, wood and plastic. Devices used in furniture production will show greater operational efficiency. The stapler has a power of 650 W and is capable of delivering up to 30 strikes per minute. Consumables include nails or staples.

Cost: from 900 to 1,400 rubles.

furniture stapler Kolner KES 650

Electrical

Becornce F30

The electric furniture stapler Becornce F30 operates at a voltage of 220 V. The tool is designed for driving staples measuring 10-30 mm at a speed of 45 pcs/min. The body of the staple gun is made of bright orange plastic, the working surface is made of aluminum. The handle has an ergonomic shape that is comfortable to grip with your hand; on the front there is a power button and trigger. To drive a staple, you will need to turn on the stapler and lightly press the trigger. The dimensions of the device are 22x22cm. The power of the staple gun is 2300 W. This is enough to pierce hardwood with staples.

DEKO DKET01

The DEKO DKET01 electric furniture stapler works with staples and nails. The tool is quite impressive in size - 27.5x7x19.5 cm, weighing about one and a half kg, made of durable orange plastic with black rubberized inserts on the handle and body. The magazine is made of aluminum, where staples and nails are easily inserted in just one movement. The staple gun operates on a 220 V network, the cable length is 2 meters. The power button and driving depth adjustment are located at the bottom of the housing. There is a trigger on the handle. The staple gun is suitable for both the home craftsman and professional construction or furniture work.

DEKO DKET02

Electric powerful furniture stapler DEKO DKET02 is designed for driving staples and nails into wooden surfaces, plastic, chipboard and MDF boards, plywood. The staple gun operates from a 220V electrical network, the wire length is 2 m. The tool has quite impressive dimensions - 28x27x8 cm and weighs more than 2 kg. Hammering speed is 20 staples per minute. At the bottom of the case there is a power button, on the side there is a shock force regulator. The trigger is located on the handle. The staple gun is made of black plastic with yellow rubberized inserts on the handle and body to reduce slipping.

TASP MESG45

The electric furniture stapler TASP MESG45 is small in size 14.5x17 cm, weighs only 600g and can be used even by women. Using a staple gun you can drive staples 8-14mm and nails 15mm high. The kit, along with the stapler, includes a set of 800 staples and 200 nails. The tool is made of durable plastic in sky blue color. The handle and part of the body are lined with rubberized anti-slip inserts. The staple gun operates from a 220 volt network, the cord length is 2 m. The number of blows is 30 per minute, which is quite enough for professionals. The handle is ergonomically shaped, easy to grip, there is a start button in front, and a lock on the side.

Prostormer PTET1054

The electric furniture stapler Prostormer PTET1054 is made of blue plastic with black rubber inserts. The device runs on electricity, the cord is 2 meters long. The staple gun is designed for automatically driving staples (8-16mm) and nails (15-16mm) into wood, plastic, plasterboard, chipboard sheets. The power button and power regulator are located at the bottom of the case. The tool is capable of hammering consumables at a speed of up to 20 per minute. The rated power of the device is 2000 W. The kit includes a set of staples and nails for testing the staple gun in operation.

HIMOSKWA YWL124TE

The electric furniture stapler HIMOSKWA YWL124TE is designed for driving staples and nails at a speed of up to 30 per minute. Power - 2000W. For the staple gun to work, it must be connected to a 220 V electrical network. When choosing a modification of the tool, you should pay attention to the type of plug suitable for the region. The body is made of durable light green plastic. Ergonomic handle with rubber pads for comfortable grip. The magazine and working area of ​​the stapler are made of aluminum. The power button on the staple gun is located at the bottom of the body, and the trigger is conveniently placed on the handle.

HIFESON F30/422

Electric furniture stapler HIFESON F30/422 is designed for fastening various materials with staples (6-22mm) or nails (6-30mm). The staple gun operates from a 220V electrical network. When ordering a stapler, you should pay attention to the design of the plug, which is manufactured according to European or American standards. The dimensions of the staple gun are 230x240 mm. It is made of burgundy plastic. The handle has a power button and a trigger. The upper part is oblong shaped for gripping with the second hand. The magazine is made of aluminum and refilling with consumables is easy.

Dutoofree F3042

The Dutoofree F3042 electric furniture stapler with a power of 2000 W has 6 impact force modes and operates on a 220V power supply. Suitable for fastening various materials with nails 15-30mm and staples 15-25mm long. The body of the staple gun is made of plastic with motor cooling holes, which protects the device from overheating. Ergonomically shaped handle with trigger. The magazine is made of aluminum and can be filled with consumables in just one movement. The staple gun can be used for home work, and it will also be a good assistant for a professional craftsman.

DOERSUPP

The DOERSUPP electric furniture stapler with a power of 1800 W fastens even hard materials with staples up to 30 mm in length and nails 10-30 mm. Driving speed is 1-3 nails per second. The tool operates from a mains voltage of 220-240V, to which it is connected using a Euro plug with a two-meter cord. The staple gun is suitable for household needs and professional work. The comfortable, ergonomically designed handle is comfortable to hold in your hand. At the bottom of the handle there is a power button, at the top there is a trigger. The staple gun is made of plastic, the magazine is made of durable aluminum alloy. Dimensions 20x23 cm, weight 2 kg.

Drillpro

The Drillpro electric furniture stapler with a rated power of 2000 W is made of durable plastic with a rubber grip on the handle. The stapler operates from a 220-240 V electrical network. It is connected using a Euro plug, the cord length is 2 meters. Small in size - 22x22 cm, the staple gun is powerful enough for professional work with hardwood. The stapler can be used to drive straight staples and nails up to 30mm long at a speed of 30 per minute, which is one of the best performance among staple guns.

How to insert staples into the receiver

The design of all mechanical hammers is almost the same. There is a handle-lever, due to which pressing occurs, and at the bottom of the stapler there is a metal plate that opens the receiver. This is where we have to load the staples.

Before you buy brackets at a hardware store, you need to find out what size will fit your device. As a rule, the size and type of suitable staples are indicated on its body.

For example, the body of our stapler indicates a width of 12 mm and a depth of 6-14 mm. This means that you will only be able to charge staples in this range.

Smaller or larger brackets will not fit into the receiver. The size of the staples in millimeters is also indicated on their packaging.

To insert projectiles into the stapler, you need to open the metal plate on the back surface.

To do this, you need to take it with your thumb and forefinger on both sides, then pull it towards you and slightly down. Thus, we press the metal tab on the back surface of the plate, and pull out a metal spring, similar to the one found in a regular office stapler.

If there are any staples left in your stapler, they will fall out once the spring is pulled out. If they are not there, then it’s time to install new ones for further work.

The staples are inserted into the receiver (the hole is in the “P” position). Next, insert the spring back, closing the metal tab. That's all, the tool is loaded and ready to go!

How to choose staples for a furniture stapler?

When choosing staples in a store for a mechanical furniture stapler, you need to proceed from the information given in the instructions for the device and be guided by certain parameters.

• Staple depth - usually varies from 4 mm to 14 mm. The choice of parameter is determined by the nature of the work. So, in order to cover a chair with tapestry, 8 mm staples are suitable, and to work with felt you will have to use 10-12 mm staples.
• The type of brackets must be consistent with the tool model. The markings on the packages must be the same for both the model and the staples. So, if the staples are too small for the tool, then during one shot they can fly out in a burst one after another. Additionally, the tray may become skewed, causing the tool to jam.

You should not follow the recommendations of sellers who advise replacing staples of one type with similar ones. They may have the same depth, but their geometry, invisible to the eye, may be different, which will lead to device failure.

Which stapler is better to choose?

There is no definite answer to this question. The choice may depend on many factors:

• purpose of the stapler;
• buyer's budget;
• required performance;
• duration of work.

The best solution is to take your time! Look again at all the models on our website and decide which one suits you best.

We also invite you to watch a video that will help you choose a tool!

Video - How to choose a stapler

Network furniture staplers

The tools are connected to the electrical network. This makes their device much lighter, but also reduces their maneuverability.

Kolner KES 650

The tool is produced by a brand from Germany. The model does not have the ability to regulate force. The wide trigger makes turning on the device much more convenient and simplifies use. Before turning it on, you need to press the button on the side of the device. This eliminates the possibility of unforeseen situations and accidents.

Replacement of equipment can be done by removing the magazine at the bottom of the device. The device is lightweight - only about 600 grams. Stapler power – 650 W. It is not intended for long-term work.

Price: 1250-1650 rub.

Kolner KES 650

pros

• low cost;
• light weight and size;
• protection against unplanned switching on.

Minuses

• unregulated power;
• no possibility of double strike;
• small store capacity;
• not intended for long-term tasks.

Stapler Kolner KES 650

Hammer HPE2000C

A good option for a network stapler from a brand from America! The device's motor is very powerful (2000 W), so it can make loud noises during operation. The force is adjusted using a button located on the handle. The trigger of the mechanism has a special device that prevents the palm from slipping. The mechanism has a narrow nose shape, so it does not obstruct the visible view during operation. Thanks to its power, the mechanism can drive staples up to 32 mm. This is a very excellent indicator, which is why this model is actively used in the repair of large furniture.

Price: 3000-4000 rubles.

Hammer HPE2000C

pros

• the device fires up to 30 shots per minute;
• ability to adjust power;
• comfortable handle;
• the mechanism can drive long staples into hard material.

Minuses

• large dimensions;
• heavy weight of the stapler;
• short cord.

Stapler Hammer HPE2000C

BISON ZSP-2000

BISON ZSP-2000 is a domestically produced model. The device has excellent weight balance, since the motor is located at the rear of the mechanism. Motor power 2000 W. Rate of fire up to 20 staples per minute. Adjustment is carried out using a button at the end of the handle.

Price: 3500-4500 rubles.

BISON ZSP-2000

pros

• excellent fixation of thick materials;
• advanced parameters for threading staples;
• the presence of an additional switch;
• efficient engine cooling.

Minuses

• heavy weight;
• small store;
• low speed of driving staples.

Stapler ZUBR ZSP-2000

BOSCH PTK 14 EDT 0.603.265.520

The best network stapler! Number 1 in our ranking. Despite the high price, the device is really worth it. The mechanism has rubber pads (for ease of use). You can adjust the power using the red wheel located on the bottom of the device.

The stapler is distinguished by its quiet but powerful operation. The tool is very comfortable to use. The desired mode is selected from above. The stapler also has the possibility of a double strike (the device can drive in two consumables at a time).

Price: 6000-6500 rubles.

BOSCH PTK 14 EDT

pros

• light weight;
• the device drives 30 staples per minute;
• there is the possibility of a double strike;
• gradual power control.

Minuses

• high price;
• short wire 1.5 m.

Stapler BOSCH PTK 14 EDT

TOP 13 best staplers

Which stapler would you choose or recommend?

Take the survey

Best Battery Powered Staplers

Cordless staplers combine the power and performance of corded staplers with the mobility of mechanical staplers. Wireless models have a number of features:

1. Power and efficiency;
2. High level of ergonomics and the presence of various adjustments;
3. Modern design, designed taking into account the needs of users;
4. Conditional independence from electricity. For operation it is necessary to charge the batteries from the mains;
5. Possibility of using universal batteries from other tools in the brand’s line.

The disadvantages of cordless staplers include a slightly increased mass, which is added by the weight of the battery. And also the need to purchase additional batteries to increase battery life. The design feature also affects the cost; wireless models are the most expensive on the market.

BOSCH PTK 3.6 Li 0.603.968.120

A cordless stapler at an affordable price from one of the top ones will be an ideal option for purchasing a tool for the home. It optimally combines good performance of 30 beats per minute with a long battery life of 300 minutes. A lithium battery with a capacity of 1.3 A/h slightly increased the weight, thereby making the design lighter. The reliable German manufacturer did a good job on the design part; the tool fits comfortably in the hands, has a slight inertial impact and is very comfortable to use. Buyers identified long-term charging of 3 hours as obvious disadvantages.

Advantages:

• convenient form factor;
• charge level indicator and spacious firing pin;
• lightweight and powerful for its class;
• battery included;
• low price for a wireless model.

Flaws:

The battery takes 3 hours to charge.

Makita DST112Z

A solid and weighty cordless stapler designed for professional use. It is powerful, high-performance and very reliable, according to customer reviews. In addition to the standard indication of the striker charge level and increased capacity, the stapler has a convenient backlight, a suspension bracket and a trigger lock. Increased ergonomics and minimal recoil, a perfect power supply system - all these are the latest developments from the Japanese brand. The downside of top-end specifications is the rather high price and the absence of a battery and charger as standard.

Advantages:

• increased power and performance;
• well-developed ergonomics – comfort during long-term use;
• high working life and high-quality assembly;
• availability of all necessary adjustments and illumination of the working area;
• two modes: contact and serial;
• suitable for heavy loads.

Flaws:

• high price;
• The battery and charger must be purchased separately.

RYOBI R18N18G-0

This model of cordless stapler, developed using AirStrike technology, has a proven design and technical part. The gun is designed to work with fastening pins (nails) of standard size 300 and up to 5 cm long. The device operates in two modes: single and high-speed impact, allowing you to select the optimal pace during operation. The double sole system reliably protects the processed material from mechanical damage, and the improved technology to prevent idle impact has significantly increased the working life. The most convenient form factor made it easy to load the striker and remove jammed nails without the use of additional tools. This stapler was created for professionals and large volumes of work, and its impeccable quality is confirmed not only by the brand image, but also by numerous reviews.

Advantages:

• two operating modes;
• increased working resource;
• clump;
• excellent ergonomics.

Flaws:

• high price;
• Battery and charger are not included.

Voting for the best stapler

Which stapler would you choose or recommend?

Rapid R153 WORKLINE RUS 5000061

8.33 % ( 2 )

STANLEY Light Duty 6-TR150L

12.50 % ( 3 )

BOSCH HT 14 0.603.038.001

12.50 % ( 3 )

COBALT 240-683

4.17 % ( 1 )

GROSS 41002

8.33 % ( 2 )

Center tool 1609

0.00 % ( 0 )

Inforce 06-09-42

8.33 % ( 2 )

BOSCH PTK 3.6 Li 0.603.968.120

0.00 % ( 0 )

MILWAUKEE M12

4.17 % ( 1 )

BOSCH PTK 14 EDT 0.603.265.520

20.83 % ( 5 )

BISON ZSP-2000

4.17 % ( 1 )

Hammer HPE2000C

8.33 % ( 2 )