The best lugs for walk-behind tractors in 2021

One of the main assistants to a person when running a personal subsidiary plot is a walk-behind tractor. Its main purpose is to plow the land. This is quite expensive equipment, and in order not to spend money on such highly specialized equipment, it is enough to purchase an additional lug, which will expand the range of applications of the walk-behind tractor.

The industry produces a wide range of lug models. Some of them are universal, suitable for many walk-behind tractors, while others are narrowly targeted, suitable for a specific brand.

Functions of lugs

Grousers are additional equipment that expands the scope of use of walk-behind tractors on the farm. Their use is necessary when plowing the land, loosening, hilling and harrowing. Thus, the main functions of the equipment are:

Strengthening the adhesion force of the walk-behind tractor with the soil. Widely used on arable land and sandy soil.
An increase in the total weight of the unit, which makes it possible to use other additional equipment. Walk-behind tractors come with both small and large mass, but it may not be enough to move, for example, a plow. In this case, additional weight will not hurt.
The structure of the lug is such that when moving it produces additional loosening of the soil. Can be used to remove weeds.

Design of the Neva MB 2 walk-behind tractor

Like any other special equipment, a walk-behind tractor consists of a number of components that work together. Let's look at the main parts that make up this equipment:

engine (due to this unit, torque is generated, which is transferred to the axle);
transmission (this component allows you to determine the direction of application of torque, as well as the number of engine revolutions);
gearbox (this unit allows you to evenly distribute torque to the driving parallel axis);
transmission mechanisms (allow you to redirect torque from the engine to the gearbox and to the axle);
wheelbase (the axle moves the device along the surface; there are two-wheel and four-wheel models);
steering mechanism (due to this mechanism, it is possible to control a motor-cultivator or Neva walk-behind tractor).

In this case, the main components of the walk-behind tractor were considered, but its structure also contains a number of additional mechanisms and parts.

Important! In order for this soil cultivation device to work properly, it is necessary to constantly monitor the performance of the power units, as well as auxiliary mechanisms; in addition, maintenance (replacement of consumables) is carried out in a timely manner.

Motoblock Neva MB 2 with Subaru engine

It's no secret that this type of special equipment is equipped with not only a Briggs Stratton engine. Also, these units can be equipped with Subaru engines. Let's consider the main characteristic features of these devices:

higher power;
less fuel consumption;
higher speeds;
increased engine service life.

All these qualities make it possible to significantly upgrade the walk-behind tractor circuit, which also allows you to extend the service life of the device.

Important! If the motor is being replaced, then it is also necessary to subject all other components to the appropriate maintenance in order to subsequently carry out a comprehensive replacement of consumables.

Types of lugs

All wheel lugs are divided into two types, which are structurally different from each other.

The first type is one or more rims welded together, equipped with corner plates or spikes. The entire structure is metal and is attached to the unit instead of the original wheels using a system of special fastenings. The main advantage of this type is its high functionality, but the disadvantage is the need to replace wheels, which can turn into a lengthy process;
The second type is metal attachments for mounting on top of equipment wheels. Installation of such equipment is simple, but it does not solve problems with light walk-behind tractors and requires additional weights. Rarely used.

The plates on the wheels can have different shapes for a reason. For good traction with previously cultivated soil, it is customary to use a design with wedge-shaped treads. They plunge deeply into the arable land, while moving, raking the earth from under them. Spikes do not have this ability and will impede mobile movement. But they are irreplaceable in virgin lands.

What third-party wheels are suitable for the Neva walk-behind tractor?

Wheels from Muscovites and Lada are best suited for installation on the Neva walk-behind tractor. There is no need to change anything in them, since their diameter is ideal for installation on a walk-behind tractor. They only need to be slightly modernized by welding.

Factory options will cost much more.

The main task when modernizing Zhiguli wheels is to make them heavier, since in the factory configuration they are very light.

Listed below are the main stages of manufacturing wheels for a walk-behind tractor from car tires:

An axle shaft is installed inside the wheels;
To make it easier to change wheels, square plates are installed on the axle and holes are made in them. And then the wheels from Zhiguei are attached to these plates;
A cap is placed on the outside to protect against external factors;
The tubes should be removed, and only the tires should be left (to improve the quality of traction, winter tires should be used).

Using tires from other cars is problematic because they have a larger diameter or width, so they need to be additionally adjusted using an axle extension or some other method, and this is not always possible for everyone.

To improve the lug-holding properties, some people additionally cover the wheels with a chain. When driving, the chain digs into the ground and provides additional traction. The effect of it is especially noticeable when driving after rain or snow.

The video demonstrates how to install Zhiguli wheels on a Neva walk-behind tractor:

Types of lugs

Additional equipment, which are iron wheels attached to the walk-behind tractor in place of the original rubber ones, are made according to the same principle, but differ slightly in appearance.

The bipods are the smallest. Attached to the gearbox of cultivators or small walk-behind tractors used for simple agricultural work.
Three-rail – for the heaviest equipment. The width of such a wheel is up to 20 cm. The earth easily penetrates between the runners, which ensures good traction with the ground.
Solid - a wheel no more than 13 cm wide. They are used for hilling beds, when the structure must fit between the rows and not damage the plants in the bed.
For walk-behind tractors heavier than 120 kg, manufacturers provide special tractor tires.

The height of the wheel may vary, depending on the work performed:

For harrowing, digging and plowing, wheels with a diameter of 40-50 cm are used;
For double-row hilling, the largest ones are from 60 cm;
For single-row hilling 30-43 cm.

How much oil to pour into a walk-behind tractor engine

It should be understood that in walk-behind tractors the oil is subject to periodic replacement not only in the engine, but also in the gearbox and transmission. Let's take a closer look at the quantity of this consumable:

1.3 liters of engine oil should be poured into the engine;
oil is poured into the gearbox using a special dipstick;
In the transmission, oil is also poured in accordance with the dipstick.

After pouring lubricant into the motor, you need to check its level. It should be located between the minimum and maximum.

Important! If there is a lack of lubrication, the engine life will be sharply reduced; if there is an excess of oil, a reduction in working life may also occur, since this liquid is not subject to compression.

Tips for choosing equipment

In order not to regret the purchase, you need to carefully consider the choice of lug. What to pay attention to when choosing:

The structure must be made of heavy metal. Light alloys are not suitable, since in this case the main function of weighting is lost.
Attachments should absolutely not touch the walk-behind tractor. It is advisable to purchase narrowly targeted models.
The bends of the spikes should be arrow-shaped and directed in the direction of movement, sinking well into the ground for greater traction with the soil.
An important indicator is the dimensions - the diameter and width of the rim. Each model of walk-behind tractor or cultivator has its own preferences in this matter. The general criteria will be: wheel diameter 70 cm for heavy models and about 32 cm for light ones.
It is desirable to have the ability to use additional weights for the purchased attachments.

Owner reviews

On these same forums you can find discussions of a variety of issues on our topic, as well as ask for advice on the nuances when choosing from other people who have already bought wheels for the Neva walk-behind tractor and have experience in using them. Here are a few of them.

Sergey writes:

“The lugs are the basic device for stable operation of the walk-behind tractor. Therefore, I decided not to skimp on it. As you know, the miser pays twice. But I absolutely did not want to do this. Therefore, I immediately purchased a kit for plowing and hilling. These are two completely different models, and I want to tell you that hilling with grousers for plowing is not realistic. They are much wider. And vice versa, plowing with those that are intended for hilling will also not work. They are too thin and will bend quickly."

Ivan:

“There's a problem. My walk-behind tractor often began to get stuck in the mud due to heavy and constant rains. And work needs to be done. Therefore, I needed to quickly find a solution to this problem. I didn’t have the money to buy lugs. On the forums they advised to put a chain on the wheels. As a temporary solution it worked great. Only the chains broke too often. And I realized that it would be necessary to prepare for further work better. And when the time comes to make the lugs yourself"

Rating of quality lugs in 2021

According to buyers, high-quality equipment should cope with the tasks assigned to it and be inexpensive. Below is a rating of high-quality models of lugs at an affordable price for the most common walk-behind tractors and cultivators of domestic and foreign production.

KMS

Produces lugs for walk-behind tractors "Neva", MB2, MB23, MultiAgro. Used for plowing. Promotes reliable lateral and longitudinal traction with the ground, reducing slippage. Suitable for compacted and loose soil. Clinging to the ground with their ridges, they provide stability and mobility of movement. The wheels consist of three rims. Diameter – 46 cm, width – 21.5. Design features prevent the sticking of wet and heavy soil. They are attached to the gearbox shaft instead of the original wheels.

KMS lug

Advantages:

Universal;
Can be used on all types of soil;
Large weight - 16 kg increases functionality;
Easy to assemble;
Self-cleaning.

Flaws:

Not detected.

Izdelmet IZD 103057

Used for domestic Salyut and Agata - a self-cleaning option. They have a diameter of 68 cm, width of 13, weight of 17.5 kg. Heavy attachments to increase the weight of the motor plough and provide it with stability. Suitable for all types of work - plowing, loosening, harrowing, hilling. They are attached to the gearbox shaft with a bushing. Welded reliably. According to customer reviews, they last a long time.

lug Izdelmet IZD 103057

Advantages:

Can be used on all types of soil;
Fashionable to use in large areas;
Suitable for all types of work;
Durable;
Average price – 2500 rubles;

Flaws:

Not detected.

Mobile K

A well-known domestic manufacturer of agricultural machinery offers a wide selection of attachments for various types of walk-behind tractors. The most common set is 425*200 for the Neva, Ugra, Oka, Cascade and several other models. Universal, three-poled and used for plowing. Wheel width 20 cm, diameter – 42.5 cm.

Mobile K lug

Advantages:

Suitable for a wide range of domestically produced equipment models;
The manufacturer provides a 2-year warranty;
Easy to install;
The average price is 3200 rubles.

Flaws:

Extension cords required.

Carver 01.015.00009

Additional attachments for walk-behind tractors of the same name. Provides sufficient traction on loose soil. It is used to improve cross-country ability and allows you to move a plow or hiller across the field. Three-track, does not compact the soil. Domestic production. Diameter – 36 cm, width – 12. Three narrow stripes on the rim additionally loosen the soil.

Carver lug 01.015.00009

Advantages:

Universal for Carver;
According to customer reviews - one of the most reliable;
Deeply immersed in the soil, which provides good traction;
The average price is 2000 rubles.

Flaws:

There is no data on compatibility with other models of walk-behind tractors.

Standard "Virgin" 010116

Designed for the popular Cascade, Tselina MB, Kadvi MB, Neva and Oka. Used for heavy work in gardens - hilling, plowing and loosening. The rim is solid, which improves cross-row maneuverability. It is attached using a bushing to the gearbox shaft, this contributes to the versatility of the model. The outer diameter of the wheel is 68.5 cm, width is 12.5 cm.

lug Standard “Virgin” 010116

Advantages:

Excellent quality;
Versatility;
Can be used for all types of agricultural work related to land;
The cost per set is 3000 rubles.

Flaws:

Some models require an extension cord, which is included in the kit - a price for versatility.

Patriot 490001070

Applicable to walk-behind tractors of the same name. Suitable for all types of arable work - plowing, loosening and cultivation. Fastening to the gearbox shaft using a bushing. Compatibility with other models of mini-farm equipment is unknown. External diameter – 40 cm, width – 18 cm. Three-runner, which increases cross-country ability, but is not suitable for moving in narrow rows. Well-known American brand, domestic production.

Patriot lug 490001070

Advantages:

Made with high quality, like many products from this brand;
Help in performing many tasks;
Excellent cross-country ability on any ground;
Cost – 2000 rubles;
Judging by the reviews, they are adapted for the Oka dm10 and the Neva.

Flaws:

It happens that the axis rotates due to the round cross-section of the mounting hole.

Maxi DDE

With a wheel diameter of 68 cm and a width of 9 cm, they are perfect for serious equipment such as Centaur, Hulk DDE, Bucephalus. Installed on cultivators when it is necessary to work with additional equipment. Provide cross-country ability on any type of soil. Optimal for working together with a hiller, cultivator and digger. Productive for servicing large farms.

Maxi DDE lug

Advantages:

The rims are even, “figure eights” are not formed;
They have eight spokes, as opposed to the usual six;
Durable;
The average price is 4200 rubles.

Flaws:

An extension cord is required, which is not included.

Mini DDE Kp-00.04.25.00.00

The well-known American brand for the production of agricultural equipment for small farms produces not only lugs for large models, but also for small cultivators. The presented product, according to reviews, is of good quality and is perfect for Moles and Mustang 1M/1MN. Although there are facts of installation of this equipment on the Caiman Vario 60S. Used for working with single-row hiller. Consists of two arches connected by a sleeve. Diameter – 34 cm, wheel width – 9 cm.

lug Mini DDE Kp-00.04.25.00.00

Advantages:

Widely used in private farms with a small amount of land;
Reliable to use;
There are many service centers;
The average cost is 1900 rubles.

Flaws:

Not detected.

"Virgin" 10102

Designed for Tselina 404, 406, Tarpan, Mole, Rancho, Elitech KB-51 and KB-52. Improves traction with the ground, helps in using additional equipment for plowing, loosening and hilling. The spikes are securely fastened; they are attached to the unit using a bushing to the gearbox shaft. Diameter – 34 cm, width – 9.5 cm. They are used in personal gardens, but are not rational for large areas.

Tselina lug 10102

Advantages:

According to reviews, it is perfect for weeding potatoes;
Fits well between beds;
The price is affordable - 1700 rubles.

Flaws:

Welding seams are poorly processed.

Hyundai S 800

Sold only as part of a set with a plow and hiller. This also includes a hitch and extensions. Designed for Hyundai T700, T800, T850, T900 cultivators. Branded equipment. Provides productive work on clay soil. The wheels are designed in such a way that they do not get stuck in the clay. The hiller is used for hilling the soil and removing weeds. Plow - for plowing. Extensions are used to adjust the width of the beds.

Hyundai S 800 lug

Advantages:

Long service life;
High-quality metal is used for manufacturing;
Widely used for vast arable lands in private farms;
The structure of the wheels does not retain wet heavy soil;
The cost of the set is about 7,500 rubles.

Flaws:

Sold only as a set.

Champion C3012

Purchased for Champion BC 4401 – a small home cultivator. The diameter of the wheel is only 29 cm, width - 9. They are attached to the gearbox shafts using a bushing and instead of conventional wheels. Used on loose soils for plowing and loosening. For small vegetable gardens and garden plots. Made from high-strength 3mm thick steel and designed for long-term use. Not suitable for clay soils.

Champion C3012 lug

Advantages:

Easy assembly;
Easy to operate;
The weight is small, but sufficient for light-weight cultivators;
Cost – 1400 rubles.

Flaws:

Not suitable for all types of soil.

Hammer 118-011

A small kit made in Germany for walk-behind tractors of the same name. Used to increase the traction force of equipment. Comes complete with hiller. It is used for plowing and hilling heavy, wet, clayey soils. Diameter – 34 cm, width – 9 cm. Common in small farms. The reliability of the manufacturer, as a rule, ensures the quality of the product. Customer reviews are positive. It was not possible to establish the possibility of use with walk-behind tractors of other brands.

Hammer lug 118-011i

Advantages:

Easy to assemble;
Affordable price for the set – 2500 rubles;
I am happy to purchase it with a hiller because of the reasonable cost;
Lasts a long time.

Flaws:

Not detected.