Individuality and perfection have taken on a new beginning with airbrushing. The ergonomic device, with its accompanying components, turns nail design and artistic modeling into an absolutely unique and special art of painting. The airbrush controls the width and volume of the line, thereby helping to create paintings and small patterns with perfect accuracy and aesthetic appearance.
The surface is uniformly painted and varnish and enamel are effectively applied, which cannot be said about a brush. If at the moment you are in search of the ideal device, then especially for you we present a rating of the TOP 7 best airbrushes: which one to choose, pros and cons, reviews, price, and, of course, a detailed analysis of each of the presented models.
TOP 10 best airbrushes for modeling
We have collected for you the best models of devices that ensure uniform spraying of paint and allow you to work with lines of any thickness. The rating is based on customer reviews and in accordance with the technical characteristics of the devices.
| Photo | Name | Rating | Price | |||
| The best airbrushes for modeling in the premium segment | ||||||
| #1 | Grafo T3 nozzle set 0.4mm | ⭐ 100 / 100 | Find out the price | |||
| #2 | INFINITY solo | ⭐ 99 / 100 1 - voice | Find out the price | |||
| #3 | H&S Evolution X Two in One | ⭐ 98 / 100 | Find out the price | |||
| #4 | HANSA 381 | ⭐ 97 / 100 1 - voice | Find out the price | |||
| The best airbrushes for modeling in the mid-price segment | ||||||
| #1 | H&S ULTRA solo | ⭐ 100 / 100 1 - voice | Find out the price | |||
| #2 | JAS 1131 | ⭐ 99 / 100 2 - votes | Find out the price | |||
| #3 | VOYLET ABS-128 | ⭐ 98 / 100 | Find out the price | |||
| #4 | Wester FPS-20 | ⭐ 97 / 100 | Find out the price | |||
| The best budget airbrushes for modeling | ||||||
| #1 | JAS 1115 | ⭐ 100 / 100 | Find out the price | |||
| #2 | Fubag AGS22/05 | ⭐ 99 / 100 1 - voice | Find out the price | |||
Which airbrush would you choose or recommend?
Take the survey
Best lists
In addition to the models presented above, we have created another TOP airbrushes that differ from each other in their special characteristics. This rating includes:
- For beginners.
- Price-quality ratio.
- Multifunctional.
Let's take a closer look at the range of models presented.
Jas 1113 – for beginners
The best device for getting the desired result in the shortest possible time. The mixing type is internal, so you get a perfect job right after the first application. The coating application is quite soft, and the device itself has a very ergonomic design that does not interfere with the production of art. The nozzle is 3mm. Ideal for the initial stages of work.
Price tag: from 1312 to 1700 rubles.
airbrush Jas 1113
1178 JAS – price-quality ratio
The device is equipped with an aluminum coating. The Air Control unit ideally helps to adjust the air supply in the airbrush itself and the width of the drawing line. With this technology, you can completely control the process and the subtlety of the work. The set includes 3 replaceable paint containers (2, 5 and 13 ml), and the nozzle diameter is 0.3 mm. Ideal value for money.
Cost: from 1213 to 1500 rubles.
airbrush 1178 JAS
Jas 1122 – multifunctional
A pistol-type airbrush with a very wide range of works. Mounting on the side allows you to paint at any angle of inclination of the device itself and install the container on both the left and right. The kit is equipped with two paint containers (7 ml and 10 ml). The device also has a maximum paint supply limiter. Nozzle size – about.3 mm.
Price: from 2250 to 3000 rubles.
airbrush Jas 1122
The best budget airbrushes for modeling
Here we have indicated models that will require an average of about 1,000 rubles to purchase.
Fubag AGS22/05
A simple airbrush for rough work that does not require high precision and accuracy. Can be used as a training specimen. The set includes two paint containers.
Fubag AGS22 05
Specifications:
- container volume - 0.022 liters;
- paint container material - plastic;
- adjustment - single, changes the air supply;
- where the paint comes from - from below;
- the mixing principle is internal;
- nozzle diameter - 0.5 mm.
pros
- low price;
- simple design;
- the optimal solution for infrequent use.
Minuses
- Do not work with aggressive liquids;
- It is necessary to additionally use a dehumidifier so that the applied layers of paint do not float.
The average cost of the device is 700 rubles.
Airbrush Fubag AGS22/05
JAS 1115
Another representative of the JAS line with excellent technical characteristics and a more attractive price. An additional advantage compared to the previous model is the larger paint tank, which allows for fewer composition changes when large areas need to be worked on.
JAS 1115
Specifications:
- container volume - 0.022 liters;
- paint container material - glass;
- adjustment - double, independent;
- where the paint comes from - from below;
- the mixing principle is internal;
- nozzle diameter - 0.3 mm.
pros
- air and paint flow are individually adjustable;
- suitable for a wide range of jobs;
- inexpensive.
Minuses
- not detected by users.
The average cost of the device is 1103 rubles.
Airbrush JAS 1115
Comparison table of the presented models
In order to compare the presented products, we suggest taking a look at the table with their characteristics.
| Model | Tank volume (ml) | Nozzle diameter (mm) | Spray type | Adjustment | Price, rub) |
| Jas 1116 | 2 | 0,2 | compressor | double independent | from 1500 to 2000 |
| Iwata NEO CN | 30 | 0,35 | compressor | double independent | from 4200 to 4800 |
| ROYALMAX TC-12K | 9 | 0,3 | pneumatic | internal mixing | from 3800 to 4200 |
| Fengda BD – 130 K | 7 | 0,2; 0,3; 0,5 | pneumatic | independent double | from 2000 to 2440 |
| Inked Caprice | 22 | 0,3; 0,5 | pneumatic | independent double | from 1900 to 2250 |
| Fubag AGS7/0.2 110107 | 7 | 0,2 | pneumatic | independent double | from 2000 to 2440 |
| Wester FPS – 20 | 60 | 0,35 | pneumatic | single | from 1700 to 2445 |
What is an airbrush
This is a device designed to spray paint using air flow. It is also considered a variation of the mini spray gun. The airbrush is used by representatives of many fields - from graphic designers and modelers to confectioners. The operating principle of the device is based on a pneumatic spray system. High pressure air is supplied through the structure, and this flow passes through an opening with a small diameter.
Airbrush device
Concorde CD-AB7D
The airbrush is valued by buyers for its very narrow nozzle of 0.2 mm, which allows the application of more patterned and subtle designs. The body is made of metal with a special anti-corrosion coating. He is also not afraid of mechanical damage. The weight of the model is 300 grams, which will allow your hand not to get tired while working. Air flow is 9 liters per minute, and pressure is 3.5 atm. The paint tank itself can be turned to the side in one or another working position.
Pros:
- Anti-corrosion coating;
- Durable housing;
- Thin nozzle;
- The set includes a special case;
- Light weight and comfortable shape;
- Swivel tank.
Minuses:
- Small volume tank.
Types of airbrushes
Devices for spraying paint composition differ from each other according to several criteria.
Air and paint mixing type
The process of connecting two streams occurs either inside the device or outside. In the first case, you can accurately dose the paint and its mixture with air will be more uniform. Devices with internal mixing are complex in design. However, they give more room for experimentation with the mechanics of dispensing the coloring composition and allow you to regulate the flow using a needle.
Important! Airbrushes with internal mixing of paint and air are fragile and therefore require more careful and careful handling.
External mixing airbrushes are technically simpler. And combined with a budget price, they will be a good first tool for beginning modelers. In their operating principle, they are similar to spray guns and, when using large-diameter nozzles, are suitable for working with large areas. The disadvantage of this design is the greater consumption of paint, since its spray area is much higher than that of devices that mix the air-paint flow in the spray head.
Video - How to use airbrush dyes
Adjustment type
There are single or double action airbrushes. The second is also divided into dependent and independent. Let's look at the differences between these types of devices.
- Single action airbrush with air control. Control occurs by lowering the control button down. The paint supply power remains stable;
- Single-action airbrush with paint supply control. Unlike the first device, the amount of paint sprayed changes. The air flow is unchanged, adjustment also occurs by pressing the control button;
- airbrush of double dependent action. Along with the increase in air flow, the amount of sprayed paint composition also increases. The controller on the device must be moved forward or backward. When turned on, air is supplied first, followed by paint. When turned off, it’s the other way around;
- double independent action airbrush. The controller moves both up and down and back and forth. The first degree of freedom is responsible for the intensity of air supply, the second - for the amount of sprayed paint.
Note! The last type of design is the most difficult to manage. At the same time, it provides the opportunity to fine-tune the air-color mixture. Suitable for experienced professionals to carry out complex painting work.
Needles and nozzles
If paint brushes are selected depending on the size, shape and type of bristles, then when buying an airbrush you should pay attention to the diameter and type of nozzle, as well as the needle.
Airbrush needles and nozzles
According to the complexity of the tasks for which an airbrush is required, nozzles can be divided into three groups by diameter:
- From 0.15 to 0.18 mm. Provide the highest quality paint application when working with fine lines and processing small parts in model making.
- From 0.2 to 0.3 mm. The optimal solution for work of medium complexity. These nozzles are used most often due to their versatility. With certain skills, you can work with them both on small details and on painting large areas.
- From 0.4 to 0.6 mm. They are suitable for large-scale work. In addition to artistic purposes, they are used to distribute varnishes or primers onto treated surfaces.
Important! If you have to work with an airbrush with a small-caliber nozzle, the paint must be finely dispersed. Otherwise, the composition will most likely not pass through such a small hole, which can cause damage to the structure. Plus, there is a risk of ruining the drawing due to improper distribution of the air-paint mixture.
Nozzle mounting method
There are 4 types of fastenings:
- threaded, fixed;
- conical, fixed, self-centering nozzle;
- combined, fixed, with self-centering nozzle;
- floating, with self-centering nozzle.
Airbrush nozzle mounting method
The first option is one often used by manufacturers. However, threaded nozzles are difficult to install as they can break easily. Part of the part often gets stuck inside the airbrush body, and it is almost impossible to get it out, which is why you have to buy a new device. For the same reason, it is necessary to pay special attention to the quality of the paint used. If you do not calculate the density of the composition and the feed power, the nozzle will also not withstand the load.
Type of paint supply
Separate the top, bottom and side. Let's look at the principles of their operation:
- In a device with a lower supply system for the coloring composition, the latter is supplied due to the difference in pressure. The paint container is attached to the nozzle at the bottom of the airbrush body. The paint can be quickly changed by first cleaning the structure from old residues.
- When feeding paint from the side, the reservoir is attached, respectively, to the pipe in the side of the airbrush body. This is convenient if you need to hold the device vertically, since there is no risk of the composition leaking out. However, the asymmetrical weight distribution can make operation uncomfortable. Please note that side feed painting will require small paint containers, which are often sold as separate parts.
- Airbrushes with top paint supply allow you to work with viscous compositions. They flow down under their own weight, are picked up by air and then sprayed. This option is more ergonomic and allows you to work on small parts with minimal pressure.
Video - How to wash an airbrush
Classification
Based on the principle of mixing paint and air flow, airbrushes are divided into 2 groups:
- Internal mixing. In this type of device, mixing of air and paint occurs inside the airbrush body. The presented design is the most complex, and accordingly the cost will be more expensive. Such devices are designed to perform complex and delicate artistic work.
- External mixing. A simple design of the device, when used, flows of paint and air are mixed in the paint container itself. This type of airbrush is used for painting large objects, such as cars.
Also, the presented airbrushes are divided according to control principles.
- Single. They are a single action device. During its use, the owner is given the opportunity to regulate only one of the available flows: either paint or air.
- Double action. This airbrush provides control of two flows at once, both air and paint. But, it is important to remember that when using the presented device, you first need to open the valve with the air supply, then the coloring liquid is sprayed.
How to choose the best airbrush
Once you have decided on the technical requirements for the device, modelers advise paying attention to the following features before making the final purchase:
- manufacturer's brand. The most common models are H&S, JAS, Wester. If you buy an airbrush from an online store, look at the reviews. If you choose it in person, try how the device fits in your hand. You may find it more convenient to use devices from a specific manufacturer, even if you haven’t seen rave reviews about it;
- availability of spare parts. When buying a rare model, you risk finding yourself in a situation where you cannot find a new part to replace the old broken one or buy accessories to expand the capabilities of the airbrush. Well-known manufacturers, trusted by users, try to produce lines of models with interchangeable parts. This is especially convenient if you need to purchase a new airbrush to replace your old one. There is no need to throw away accessories that are in good condition;
- price. As practice shows, if you wish, you can find good models in the budget segment. Sometimes there are cheaper variations of premium airbrushes. They are suitable for beginners and craftsmen who do not place too high demands on the paint sprayer. Another plus is that such devices can be gradually modified and improved through accessories and the gradual replacement of spare parts.
Video - How to choose an airbrush
Fubag AGS22/05
The small dimensions of the airbrush will help you conveniently and quickly apply drawings to the car body. Air consumption - 11 liters, pressure - 2 bar. There is a paint regulator here that will help you adjust the amount of paint allowed. Two replaceable tanks will help you change paint with different colors. The airbrush comes with a plastic case with holders, a pipette, a wrench and an air hose.
Pros:
- Fits comfortably in the hand;
- Adjustment of paint volume supply;
- Fast and neat work;
- Good equipment.
Minuses:
- The case is not durable.
Voting for the best airbrush
Which airbrush would you choose or recommend?
Grafo T3 nozzle set 0.4mm
0.00 % ( 0 )
INFINITY solo
16.67 % ( 1 )
H&S Evolution X Two in One
0.00 % ( 0 )
HANSA 381
16.67 % ( 1 )
H&S ULTRA solo
16.67 % ( 1 )
JAS 1131
33.33 % ( 2 )
VOYLET ABS-128
0.00 % ( 0 )
Wester FPS-20
0.00 % ( 0 )
JAS 1115
0.00 % ( 0 )
Pressure regulator
Regulators are designed to control the pressure under which airbrush paint is supplied.
They can be installed:
- on the compressor;
- on the hose;
- on the body of the airbrush.
The regulator allows you to increase or decrease the pressure depending on the pattern being performed. If a compressed air cylinder is used as a compressor, then a metal pressure regulator is used.
Regulators are designed to control pressure
Why does a pastry chef need an airbrush?
A confectionery airbrush is a food paint sprayer.
You may be asking yourself, “why does a pastry chef need an airbrush at all?” — with the help of an airbrush, various design options for confectionery products are created:
- Using an airbrush you can completely color a cake, and you use less dye;
- Creation of kandurin spraying in silver, gold and other colors.
- Creation of drawings and inscriptions on various products.
