Mole pipe cleaner - composition, instructions

What is he like?

The “Mole” sewer pipe cleaner dissolves residual household waste that creates blockages in drains.

Fatty deposits accumulate in siphons and on the bends of pipes, on which sand and other dirt sticks, hair, animal hair and fluff remaining after washing things collect, lumps of toilet paper and small particles of food get stuck. The lumen of pipelines is also narrowed by inorganic impurities and salts that make up hard water.

“Mole” can dissolve any clots that impair the permeability of the sewer system.

By removing existing obstacles to the movement of water, the drug stops the process of decay of organic matter, accompanied by unpleasant odors.

Recommendations for use

A remedy such as Mole has been used for several decades, and during this time its quality has been confirmed.
But to enhance the effect it is recommended:

• Before pouring the product into the drain hole, open the hot water tap for a couple of minutes so that the sewer pipes warm up;
• after 1.5 hours, pour 1.5-2 liters of water and use a plunger so that the product penetrates into the deeper layers of fat and lime deposits.

If sewer cleaning is required, Mole will help quickly and effectively remove deposits inside the pipes. Despite the fact that more modern means of removing contaminants from sewer pipes have appeared on the market, Mole is still one of the most effective ways to clear blockages. The components of this drug quickly dissolve the resulting deposits, which are then easy to get rid of - just rinse them off with running water.

Purpose and scope

The “Mole” plumbing cleaner is used to dissolve dirt accumulated in pipes, which prevents the water from draining completely. You can also use the product preventively to keep the pipes clean at all times.

Experts confirm the safety of the drug for cleaning cast iron and plastic products.

“Mole” effectively cleans sink and kitchen sink drains, dissolves dirt in siphons, and breaks through complex blockages in the toilet. Thanks to its aggressive effect on pathogenic microorganisms, the drug prevents the development of infection and makes the air cleaner.

Causes of blockages

A clogged toilet is an unpleasant problem in your apartment. No other accident causes so many problems and discomfort. If you know the reasons why the toilet is clogged, you can take timely measures to prevent it. The blockage appears due to:

• flushing product residues into the plumbing fixture;
• ingress of various debris that is insoluble in water into the pipes;
• incorrect installation of the device;
• deposition of salts on the internal walls of sewer pipes.

The first two reasons are careless handling of plumbing equipment and its use for other purposes. Their removal is entirely up to the owner's responsibility. If the toilet is installed skewed or the angle of inclination appears during operation due to poor fastening, the passage of water becomes difficult. In this case, only dismantling and installing a new one in compliance with technological requirements can help.

Over time, salts are deposited on the inner walls and gain high strength. In some cases, salt stones completely block the flow of water and a blockage forms, which is problematic to eliminate without replacing the pipes. You can clean the toilet and sewer pipes from salts by pouring a pipe cleaner into the pipeline once a month. Prevention is carried out according to the instructions on the packaging.

• Facebook
• LiveJournal
• Blogger

A clean pipe and a pipe clogged with salts

Composition of the cleaning product

The composition of “Mole” differs slightly from different manufacturers. But the basis of the drug is always alkali, which is otherwise called caustic soda or caustic soda. The chemical formula is NaOH.

Its concentration is usually 15-30%, but for complex long-term blockages they produce a product with a high caustic content - up to 60%.

The next required ingredients of "Mole" are surfactants (surfactants). They are important components of any detergent or cleaning product. These components, occupying 5-10% of the volume, increase the effectiveness of alkali by softening lumps of dirt and helping to dissolve salts contained in hard water.

Its liquid “Mole” composition must include purified water.

In addition, the developers enrich the cleaner with aromatic fragrances, making the product more ergonomic.

Some manufacturers of pipe cleaners add other components to the composition:

• sodium hydrochloride, which kills pathogens;
• organic acid, which more effectively dissolves salt deposits inside pipes;
• caustic potassium is an alkali that enhances the effect of caustic soda.

Action of the product

Places in the pipeline such as the siphon, bend, elbow, and the joint with rubber seals are “difficult” places where blockages very often form. In them, contamination clings to the surface of parts.

A film of fat forms on their entire surface, and dirt subsequently sticks to it. As a result, the lumen of the pipe narrows and a plug appears, which prevents the flow of liquid.

The chemicals contained in the “Mole” soften and liquefy accumulations; after such exposure, everything is easily washed off with running liquid.

Types and forms of release of the drug mole

Varieties of “Mole” for sewer cleaning differ in the degree of their impact on accumulated contaminants. From the product labels you can determine for what purpose it is best to use the drug. The buyer can choose from “Mole” in the form of granules, powder, liquid or gel.

Gel

The viscous structure of the pipe cleaning gel does not allow the alkaline components included in the composition to quickly dissolve in water. The drug envelops the contamination, softens it and gradually destroys it. It is especially effective for eliminating dirt in hard-to-reach places and for removing toilet blockages.

Cleaning agent "Mole" will dissolve all organic residues.

By staying on the walls for a long time, it will clean the pipeline of mineral deposits. The consumption of the gel is very small - a liter bottle is enough for several cleanings.

In addition, it is less harmful to humans and surrounding objects - it is difficult to splash or accidentally spill. With regular use, the gel-like “Mole” will keep your pipes clean for a very long time.

Liquid

“Mole”, available in dry form, is also suitable for cleaning sewer pipes. In terms of the nature of their effect, products in granules and powder are almost the same.

But unlike liquid drugs, they are convenient in that their volume is designed for one time.

Both options are great for cleaning pipes with complex configurations because they dissolve more slowly and act on contamination for a longer time.

What are the differences between different types?

The most popular remedy for blockages, which can expand the lumen of pipes and prevent the accumulation of dirt, has the word “Master” on the label. If the prefix “Bio” is added to the name, then the drug contains antibacterial components that dissolve small food particles and disinfect the pipe. This “Mole” is suitable for cleaning drains and siphons of kitchen sinks.

If there are persistent contaminants on the bends of sewer pipes, products with a high alkali content are effective, for example “Professional”, “Active”, “Tornado”. And in case of obstruction of the toilet, it is better to choose a drug whose name contains the word “Turbo”.

“Mole” pipe cleaner

Interesting on the topic:
Methods for unclogging a clogged toilet

General characteristics and types of steel pipes

Operating principle of a coaxial chimney

Comments on this article

1. Irina

   It seems to me that the best way to deal with blockages is in the form of a gel. I used to use powder and it was difficult to completely remove blockages, but now cleaning the drain takes just a few minutes. 06/13/2016 at 17:00

Advantages and disadvantages of "Mole"

The Krot pipe cleaner has several recognized advantages:

• eliminates any blockages, and the product with a high alkali content dissolves the most complex and hardened clots that have accumulated over several years;
• due to its bactericidal properties, it is very effective for cleaning siphons under kitchen sinks;
• has a low price and has a long shelf life.

The disadvantages include a long wait for the cleaning result (up to two hours), an aggressive effect on the skin and respiratory system, as well as the need to thoroughly ventilate the room after treatment.

Owners often ask whether Krot can be used to clean plastic pipes. Manufacturers claim that the drug does not damage polyvinyl chloride. The bottles into which the product is poured are made of the same material as the pipes.

Popular means

If the toilet is clogged, but for some reason you cannot resort to mechanical methods, and you don’t want to call a plumber for a fee, you can use one of the remedies described below.

Many people mistakenly believe that in this situation, the more expensive the product, the better it is , but judging by consumer reviews and test results, it turns out that this is not always true.

"Bio Favorite"

In fact, the main purpose of this drug is not to clear blockages. When it is used, waste decomposes under the influence of active bacteria contained in the preparation.

The main task of Bio Favorit is cleaning cesspools, country and village toilets and septic tanks, but as practice has shown, this product helps in most cases with sewer blockages.

The product, while effective, is safe for the pipes themselves, so you can safely use it in any quantity if the blockage is serious enough to require it. The average cost of one package of Bio Favorita is 150 rubles.

"Biocomposition Ventuz"

The product is more expensive than the previous one - one package costs about four hundred rubles, but customer reviews indicate that the product is worth the money. This drug has several important advantages:

• safe for humans, even if it comes into contact with exposed skin;
• copes with any blockages of organic origin;
• has no specific odor;
• copes with blockages faster than many other analogues;
• can be used as a preventative against blockages.

This is one of the few products that is not based on alkali or acid, but contains biobacteria that destroy the resulting blockages.

"Mole"

What to do if the toilet is clogged, and your budget does not allow you to purchase an expensive cleaning product, much less call a plumber? In this case, the reliable and proven “Mole” product is suitable.

The cost of a liter container of this product costs no more than fifty rubles, but it can also be sold in the form of a powder or gel, the cost of which can be higher or lower.

Due to the fact that there are many varieties of this product, it is impossible to give any advice on its use: use it in the proportions and in the manner indicated on the package.

When using "Mole", you should not neglect precautions: be sure to wear gloves and avoid contact of the product with the skin, and like any other similar product, "Mole" should be stored out of the reach of children.

"Mister Muscle"

The main feature of this product is that it begins to act instantly, and if the blockage is not too severe, “Mr. Muscle” will deal with it in a few minutes, although it is better to fill it for several hours or even overnight.

Available in the form of gel and powder, the cost of one package, which should be enough to clear the blockage, is about one hundred rubles.

Before clearing a blockage in the toilet using this product, carefully read the instructions on the packaging: some varieties of “Mole” cannot be used for plastic pipes, which will be corroded by the alkali present in the composition.

Chirton "Clean drains"

One of the cheapest products, which, at a price of forty rubles per package, removes severe blockages within 15 minutes.

This is probably why it is difficult to find such a product in household chemical stores - it is rarely available. A bag of granules is designed for one use.

"Deboucher"

A special gel that, in addition to alkali, also contains chlorine.

Many people remember how they used to use bleach for cleaning in public toilets, which was always accompanied by an unbearable smell.

This product, despite the presence of chlorine in it, does not have any strong aromas, and although a specific odor will still be present, it does not cause any particular discomfort.

According to the instructions, for blockages, the product must be poured into the toilet for one hour, but in reality this is a lot of time, and if the blockage is not the most complex, then 15-20 minutes will be enough.

This product costs about 150 rubles, which is relatively inexpensive for such a dual-action product: in addition to eliminating blockages, the gel can also be used to prevent them.

But many complain about the following disadvantages of this product:

• the gel is uneconomical - for a noticeable effect it is necessary to fill at least 0.5 liters at a time;
• the container is not childproof;
• Cannot be used on aluminum pipes due to high chlorine content.

"Bagi Pothan"

One of the most expensive products found on the Russian household chemicals market for removing blockages. But if finances allow, we recommend buying exactly this.

A six-hundred-gram bottle of Pothana costs about five hundred rubles, but it is enough for several cleanings.

The liquid acts very quickly, eliminating even severe blockages in just five minutes, but such effectiveness also has negative sides.

For example, it is not recommended to use Pothan to clean worn out pipes, and you should not use it too often as a preventive measure. Moreover, to eliminate “light” blockages, it is better to use more “delicate” options, using “Pothan” only in serious cases.

Do not forget about maximum protection of your hands and face and, if possible, wear a respirator. Cheap “petal” respirators cost around 50 rubles, and when using “Pothan” you should not save on this, since in a small toilet room the sharp pungent smell of this product, which has reacted with water, will be quite strong.

“Sanox “Clean drain””

This remedy for toilet blockages can be classified as “mild”, since it does not spoil the pipes, does not have a strong pungent odor and is inexpensive - only about 50 rubles for a half-liter container.

Suitable for all types of pipes - from plastic to aluminum and can even be used for cleaning old, worn-out sewers.

One container is enough for two uses, but for all its advantages, Sanox has two disadvantages.

Firstly, it acts slowly - it needs to be poured for several hours. Secondly, this liquid will not cope with severe organic blockages, so if the problem is not eliminated after the first use, you should not buy more, it is better to use any of the potent products described above.

"Selena Anticlog"

A unique product of its kind, which is produced in granules. A package of the product costs around ten rubles per package, but the effectiveness of Selena may vary depending on the character? If the blockage is small, you can get by with one package, otherwise you will have to buy several pieces.

Unlike many other similar products, this one uses soda ash as its base, which makes up almost a third of the total volume. In this regard, “Selena” has practically no odor, which cannot be said about strong alkali-based products.

But before you clear the blockage in the toilet using such granules, you need to make sure that no one will use the toilet in the next hour and a half, since these granules need time to start working.

Instructions for use

The drug must be used in accordance with the instructions for use written on the label:

• 250 ml of the product in liquid form or a mixture of the contents of one sachet of dry substance and 200 ml of water is poured into the drain of a plumbing fixture or into a pipe;
• wait 1.5-2 hours;
• rinse with a strong stream of warm water;
• if the water does not drain well enough, the process is repeated.

Using an insufficient amount of the product will not completely eliminate the obstruction of the pipe, and its excess may pollute the surrounding air too much with decomposition products.

Composition and action of chemical elements

“Mole” is a compound consisting of the following components:

• NaOH (sodium hydroxide) is the main component, ordinary caustic soda, occupies 40-60% of the volume.
• Potassium alkali (KOH) is a powerful acid neutralizer and fat solvent, occupies 8-10% of the total volume of the product.
• Surface active additives to enhance and activate the main active component, for example, increase the solubility of small particles.
• The distillate is added to liquid products in an amount of 25% of the total volume.

We recommend that you read: How to build a plasterboard box yourself to disguise pipes in a toilet?

Thus, the product contains caustic alkalis with activating additives that enhance the effect of the product.

These are quite aggressive substances that have a detrimental effect on any organic compounds, and therefore they should be used very carefully, observing safety precautions.

Note! Contact of the product with the skin and mucous membranes of a person causes a severe chemical burn. For safety reasons, it is better to use rubber gloves and act carefully. Store "Mole" away from food under a tightly closed lid or in an airtight container.

"Mole" is produced in three forms - as a gel, liquid or powder. You can purchase either a small bag of disposable product or a container with 5.5-10 liters of product. The latter is especially convenient for cleaning drains with a large amount of wastewater, and cleaning several drain holes at once. This is in great demand in catering establishments, laundries, hotels, hairdressers and other similar establishments.

Each release form has features:

When using the product, a chemical reaction produces a gas that has a pungent odor. Usually, to eliminate it, it is enough to ventilate the room while using the Mole.

Note! To eliminate odors, manufacturers add flavorings to the product, which do not affect the activity of the substance, but affect the price of the drug. In this case, the release of gas is not canceled, so it is better not to neglect the ventilation of the room and provide ventilation.

Based on the amount of the main active ingredient, the following products are distinguished:

We recommend that you read: Instructions for connecting a toilet to the sewerage system

“Professional” - with a high content of caustic alkalis, used as a cleaner for severe blockages.

“Active” is slightly inferior to “Professional”, but also works quickly and reliably.

“Turbo” - used for cleaning pipes in places where access to blockages is difficult, for example, in the toilet.

“Master” - in terms of the composition of the active substance - is the weakest remedy, used for cleaning pipes in the kitchen with minor blockages, and also as a prophylactic agent.

“Bio” is used for cleaning systems of complex configuration, while the product cleans not only pipes, but also grease traps. Powerful bacteria quickly decompose any type of sediment.

Precautionary measures

When using "Mole", according to the manual, you must wear the same protective equipment as when in contact with other caustic chemical compounds: thick rubber gloves, a thick apron and a respirator.

It is necessary to remove children and pets from the room, and after completing the cleaning process, thoroughly ventilate the room.

In case of accidental contact of the drug with the skin, be sure to wash the affected area with tap water and lubricate the burn site with a restorative cream. If the product gets on the mucous membrane, you should immediately rinse it with plenty of water and call a doctor. If you swallow Mole, drink plenty of clean water and call an ambulance.

Security measures

Since the chemical composition of a powder or liquid of this kind is quite unsafe for humans, some caution must be exercised when working with it. The most important thing is to ensure that the substance does not get on open areas of the skin, and especially on any of the mucous membranes.

Using a pipe cleaner

If this does happen, you should do the following:

• Rinse skin with running water;
• If there is contact with the mucous membrane, then rinse thoroughly and for a long time, and after that it is best to consult a doctor.

However, everything is much more complicated when the substance is ingested, through the gastric tract or through the respiratory tract. In this case, you should do this:

• Drink at least 2 liters of water;
• Contact your doctor immediately.

Types of products that remove blockages in plastic pipes and features of their use

How to clean a pipe at home? Today, there are many substances that can quickly and effortlessly remove blockages that have arisen during operation.

To clear a blockage in a plastic sewer, you can use a product in the form of a powder, gel or liquid.

All these funds are divided into three main types:

1. Dry. Such powdered products are sold in bags and have one distinctive property - compactness.
2. Gels. The most popular option. This is due to the low cost of gels for blockages of plastic pipes. Due to their structure, which is characterized by fluidity, these products are distinguished by their uniform distribution on the pipe material and effective dissolution of the plug and cleaning of the internal walls.
3. Liquid. Such products are used for the most difficult plugs of fatty origin.

Important! Before you start using any anti-clog product, it is recommended that you first read the instructions, which are usually included with them. It is mandatory to comply with all proportions in the instructions, safety rules and other requirements.

It should be noted that most of the remedies available today for blockages in plastic pipes are universal. This means that they can be used against any operational contamination in houses and apartments. However, there are also quite specific substances used in specific cases (for example, liquid substances that remove fat plugs).

If you pay attention to the chemical composition, you can distinguish 2 types of blockages:

Packaging methods and existing dosages of Mole

The variety of forms in which the Mole cleaning product is presented is due to high consumer demand. Available in small packages for one-time use when a clog occurs, and in large containers for regular cleaning of large plumbing systems.

The following organizations are wholesale buyers of Mole in large volumes:

• dry cleaners;
• laundries;
• catering establishments;
• hotel type establishments
• beauty salons, hairdressers, etc.

For example, by purchasing a container of 5.5 liters, the buyer will be provided with a cleaning agent for the plumbing system of the establishment in his possession for a long time. At enterprises and in the indicated types of establishments, significantly more Mole is needed, since the volumes of wastewater exceed those values ​​​​that are typical for domestic conditions.

In its original form, this cleaning product does not have the most pleasant smell, so for its mass use, manufacturers add various flavorings. Such additives increase the cost of the cleaning product, but all this is for the benefit of the company's employees. You can reduce the cost of cleaning your plumbing system if you avoid formulations containing coloring and flavoring components.

Clogging agent for plastic pipes. Which one is better to choose?

Sooner or later, every owner may have a question: how can you clean plastic pipes in the bathroom or kitchen. The same applies to the sewer network, in which blockages of various origins often occur. In this case, you need to choose a declogging agent for different plastic pipes. Today there are many means and devices by which you can cope with this task.

Cleaning plastic pipes is complicated by the fact that not every product is suitable for this.